Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes

This part of IEC 61212-3 gives requirements for industrial rigid round laminated rolled tubes for electrical purposes, based on different resins and different reinforcements. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Isolierstoffe - Runde Rohre und Stäbe aus technischen Schichtpressstoffen auf der Basis warmhärtender Harze für elektrotechnische Zwecke - Teil 3: Bestimmungen für einzelne Werkstoffe - Blatt 1: Runde, gewickelte Rohre aus technischen Schichtpressstoffen

Matériaux isolants - Tubes et barres industriels rigides, ronds, stratifiés, à base de résines thermodurcissables, à usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 1: Tubes ronds, stratifiés, enroulés

Izolacijski materiali – Industrijske toge okrogle laminirane cevi in palice na osnovi duromernih smol za elektrotehnične namene – 3. del: Specifikacije za posamezne materiale – List 1: Okrogle laminirane valjane cevi (IEC 61212-3-1:2006)

General Information

Status
Withdrawn
Publication Date
30-May-2006
Withdrawal Date
31-Mar-2009
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
03-Jun-2016
Completion Date
03-Jun-2016

Relations

Buy Standard

Standard
EN 61212-3-1:2006
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 61212-3-1:2006

STANDARD
oct 2006
Izolacijski materiali – Industrijske toge okrogle laminirane cevi in palice na
osnovi duromernih smol za elektrotehnične namene – 3. del: Specifikacije za
posamezne materiale – List 1: Okrogle laminirane valjane cevi (IEC 61212-3-
1:2006)
Insulating materials - Industrial rigid round laminated tubes and rods based on
thermosetting resins for electrical purposes – Part 3: Specifications for individual
materials – Sheet 1: Round laminated rolled tubes (IEC 61212-3-1:2006)
ICS 29.035.20 Referenčna številka
SIST EN 61212-3-1:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61212-3-1

NORME EUROPÉENNE
May 2006
EUROPÄISCHE NORM

ICS 29.035.01 Supersedes EN 61212-3-1:1995


English version


Insulating materials -
Industrial rigid round laminated tubes and rods
based on thermosetting resins for electrical purposes
Part 3: Specifications for individual materials
Sheet 1: Round laminated rolled tubes
(IEC 61212-3-1:2006)

Matériaux isolants - Isolierstoffe -
Tubes et barres industriels rigides, Runde Rohre und Stäbe aus technischen
ronds, stratifiés, à base de résines Schichtpressstoffen auf der Basis
thermodurcissables, à usages électriques warmhärtender Harze für
Partie 3: Spécifications pour matériaux elektrotechnische Zwecke -
particuliers Teil 3: Bestimmungen für einzelne
Feuille 1: Tubes ronds, stratifiés, enroulés Werkstoffe -
(CEI 61212-3-1:2006) Blatt 1: Runde, gewickelte Rohre aus
technischen Schichtpressstoffen
(IEC 61212-3-1:2006)


This European Standard was approved by CENELEC on 2006-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61212-3-1:2006 E

---------------------- Page: 2 ----------------------

EN 61212-3-1:2006 - 2 -

Foreword
The text of document 15/272/FDIS, future edition 2 of IEC 61212-3-1, prepared by IEC TC 15, Standards
on specifications for electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 61212-3-1 on 2006-04-01.
This European Standards supersedes EN 61212-3-1:1995.
The main changes from EN 61212-3-1:1995 are as follows:
– added application use and safety statements;
– reformatted document to bring it up to current IEC/CENELEC document format;
– new types EP GC 23 and PF CC 24 added and type PF CP 24 removed.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61212-3-1:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61212-3-1:2006

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.