EN 61212-1:2006

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements

This part of IEC 61212 gives the definitions related to the designations to be used for, and the general requirements to be fulfilled by, industrial rigid round laminated tubes and rods for electrical purposes made with any of the following resins as the binder: phenolic, epoxy (epoxide), melamine and silicone. The following reinforcements may be used either singly or in combination: cellulosic paper, woven cotton cloth, woven glass cloth, mica paper.

Isolierstoffe - Runde Rohre und Stäbe aus technischen Schichtpressstoffen auf der Basis warmhärtender Harze für elektrotechnische Zwecke - Teil 1: Definitionen, Bezeichnungen und allgemeine Anforderungen

Matériaux isolants - Tubes et barres industriels rigides, ronds, stratifiés, à base de résines thermodurcissables, à usages électriques - Partie 1: Définitions, désignations et exigences générales

L'IEC 61212-1:2006 donne les définitions liées aux désignations à utiliser et aux exigences générales à satisfaire pour les tubes et barres industriels, rigides, ronds, stratifiés à usages électriques fabriqués avec l'une des résines suivantes comme liant: phénolique, époxy (époxyde), mélamine et silicone. Il est admis d'utiliser les matériaux de renfort suivants soit isolément soit en combinaison: papier cellulosique, tissu de coton, tissu de verre, papier mica. Cette deuxième édition annule et remplace la première édition publiée en 1995 et constitue une révision technique. Les principales modifications apportées par rapport à l'édition précédente sont les suivantes: instructions supplémentaires relatives à l'utilisation et à la sécurité de l'application. Reformatage du document pour respecter le format de document actuel de la CEI. Modifications de la méthode de désignation des tubes dans le respect des pratiques courantes. Ajout des nouveaux types EP GC 23 et PF CC 24. Suppression du type PF CP 24. Mots clés: tubes et barres industriels rigides, ronds, stratifies, phénolique, époxy (époxyde), melamine, silicone

Izolacijski materiali – Industrijske toge okrogle laminirane cevi in palice na temelju iz toplotno utrjenih smol za električne namene – 1. del: Definicije, oznake in splošne zahteve (IEC 61212-1:2006)

General Information

• Status: Published
• Publication Date: 30-May-2006
• Withdrawal Date: 31-Mar-2009
• ICS: 29.035.01 - Insulating materials in general
• ICS: 29.040.20 - Insulating gases
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/TC 15 - IEC_TC_15
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 31-May-2006
• Completion Date: 31-May-2006
• Ref Project: SIST EN 61212-1:2007 - Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 1: Definitions, designations and general requirements

Relations

• Replaces: EN 61212-1:1995 - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: General requirements
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61212-1:2007
01-november-2007
1DGRPHãþD
SIST EN 61212-1:1998
,]RODFLMVNLPDWHULDOL±,QGXVWULMVNHWRJHRNURJOHODPLQLUDQHFHYLLQSDOLFHQDWHPHOMX
L]WRSORWQRXWUMHQLKVPRO]DHOHNWULþQHQDPHQH±GHO'HILQLFLMHR]QDNHLQ
VSORãQH]DKWHYH,(&
Insulating materials - Industrial rigid round laminated tubes and rods based on
thermosetting resins for electrical purposes -- Part 1: Definitions, designations and
general requirements (IEC 61212-1:2006)
Isolierstoffe - Runde Rohre und Stäbe aus technischen Schichtpressstoffen auf der Basis
warmhärtender Harze für elektrotechnische Zwecke -- Teil 1: Definitionen,
Bezeichnungen und allgemeine Anforderungen (IEC 61212-1:2006)
Matériaux isolants - Tubes et barres industriels rigides, ronds, stratifiés, a base de
résines thermodurcissables, a usages électriques -- Partie 1: Définitions, désignations et
exigences générales (IEC 61212-1:2006)
Ta slovenski standard je istoveten z: EN 61212-1:2006
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
SIST EN 61212-1:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61212-1

NORME EUROPÉENNE
May 2006
EUROPÄISCHE NORM

ICS 29.035.01 Supersedes EN 61212-1:1995


English version


Insulating materials -
Industrial rigid round laminated tubes and rods
based on thermosetting resins for electrical purposes
Part 1: Definitions, designations and general requirements
(IEC 61212-1:2006)


Matériaux isolants - Isolierstoffe -
Tubes et barres industriels rigides, Runde Rohre und Stäbe aus technischen
ronds, stratifiés, à base de résines Schichtpressstoffen auf der Basis
thermodurcissables, à usages électriques warmhärtender Harze für
Partie 1: Définitions, désignations et elektrotechnische Zwecke
exigences générales Teil 1: Definitionen, Bezeichnungen
(CEI 61212-1:2006) und allgemeine Anforderungen
(IEC 61212-1:2006)




This European Standard was approved by CENELEC on 2006-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61212-1:2006 E

---------------------- Page: 2 ----------------------

EN 61212-1:2006 - 2 -

Foreword
The text of document 15/271/FDIS, future edition 2 of IEC 61212-1, prepared by IEC TC 15, Standards
on specifications for electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 61212-1 on 2006-04-01.
This European Standard supersedes EN 61212-1:1995.
The main changes from EN 61212-1:1995 are as follows:
– added application use and safety statements;
– reformatted document to bring it up to current IEC/CENELEC document format;
– method for designation of tubes changed in line with common practice;
– new types EP GC 23 and PF CC 24 added. Type PF CP 24 removed.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2007-01-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2009-04-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61212-1:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61212-1:2006

Annex ZA
(normative)

Normative references to international publications
with their corres
...