EN 60626-1:2012
(Main)Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements
Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements
Deals with combined flexible insulating materials consisting of two or more different insulating materials laminated together. The components taken into consideration are plastic films and/or fibrous materials such as papers, woven or non-woven fabrics, impregnated or not impregnated.
Flexible Mehrschichtisolierstoffe zur elektrischen Isolierung - Teil 1: Definitionen und allgemeine Anforderungen
Matériaux combinés souples destinés à l'isolement électrique - Partie 1: Définitions et exigences générales
Traite des matériaux isolants souples combinés, composés d'au moins deux matériaux isolants différents, contrecollés. Les constituants considérés sont des films de matière plastique et/ou des matériaux fibreux, comme les papiers, les tissés et les non-tissés, imprégnés ou non.
Sestavljeni gibki materiali za električno izolacijo - 1. del: Definicije in splošne zahteve
Ta del standarda IEC 60626 vsebuje definicije, povezane s sestavljenimi gibkimi materiali za električno izolacijo, in splošne zahteve, ki jih morajo izpolnjevati. Ta standard ne vključuje sljudnega papirja kot glavne komponente, ki je zajet v standardu IEC 60371, vendar se lahko uporablja kot dopolnilni material. Materiali, ki so skladni s to specifikacijo, ustrezajo določenim ravnem učinkovitosti. Vendar mora uporabnik material za določeno uporabo izbrati glede na dejanske zahteve za zadostno učinkovitost pri tej uporabi, ne samo na podlagi te specifikacije. VARNOSTNO OPOZORILO: Končni uporabnik je odgovoren za zagotavljanje varne uporabe metod, ki so zajete ali omenjene v tem dokumentu.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.]DKWHYHFlexible Mehrschichtisolierstoffe zur elektrischen Isolation - Teil 1: Begriffe und allgemeine AnforderungenMatériaux combinés souples destinés à l'isolement électrique - Partie 1: Définitions et prescriptions généralesCombined flexible materials for electrical insulation - Part 1: Definitions and general requirements29.035.01Izolacijski materiali na splošnoInsulating materials in generalICS:Ta slovenski standard je istoveten z:EN 60626-1:2012SIST EN 60626-1:2012en01-julij-2012SIST EN 60626-1:2012SLOVENSKI
STANDARDSIST EN 60626-1:1998/A1:1998SIST EN 60626-1:19981DGRPHãþD
EUROPEAN STANDARD EN 60626-1 NORME EUROPÉENNE
EUROPÄISCHE NORM May 2012
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60626-1:2012 E
ICS 29.035.01 Supersedes EN 60626-1:1995 + A1:1996
English version
Combined flexible materials for electrical insulation -
Part 1: Definitions and general requirements (IEC 60626-1:2009)
Matériaux combinés souples destinés à l'isolement électrique -
Partie 1: Définitions et exigences générales (CEI 60626-1:2009)
Flexible Mehrschichtisolierstoffe zur elektrischen Isolierung -
Teil 1: Definitionen und allgemeine Anforderungen (IEC 60626-1:2009)
This European Standard was approved by CENELEC on 2012-03-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-12-23 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-03-23
This document supersedes EN 60626-1:1995 + A1:1996. EN 60626-1:2012 includes the following significant technical changes with respect to EN 60626-1:1995:
The Scope was revised specifying treatment of mica paper, and Table 1 was revised cancelling materials no longer in use and introducing newer materials.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 60626-1:2009 was approved by CENELEC as a European Standard without any modification. SIST EN 60626-1:2012
- 3 - EN 60626-1:2012 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year IEC 60554-3-1 1979 Specification for cellulosic papers for electrical purposes -
Part 3: Specifications for individual materials - Sheet 1: General purpose electrical paper - -
IEC 60626-3 2008 Combined flexible materials for electrical insulation -
Part 3: Specifications for individual materialsEN 60626-3 + corr. October
2008 2008
IEC 60641-3-2 2007 Pressboard and presspaper for electrical purposes -
Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 EN 60641-3-2 2008
IEC 60674-3-2 1992 Specification for plastic films for electrical purposes -
Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation EN 60674-3-2 1998
IEC 60674-3-4 to 6 1993 Specification for plastic films for electrical purposes -
Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation EN 60674-3-4 to 6 1995
IEC 60674-3-8 - Plastic films for electrical purposes -
Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation EN 60674-3-8 -
IEC 60819-3-1 2001 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Filled glass paper EN 60819-3-1 2001
IEC 60819-3-2 2001 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Hybrid inorganic-organic paper EN 60819-3-2 2001
IEC 60819-3-3 + corr. February
2006 2008 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers EN 60819-3-31)
1) EN 60819-3-3 is superseded by EN 60819-3-3:2011, which is based on IEC 60819-3-3:2011. SIST EN 60626-1:2012
IEC 60626-1Edition 3.0 2009-08INTERNATIONAL STANDARD NORME INTERNATIONALECombined flexible materials for electrical insulation –
Part 1: Definitions and general requirements
Matériaux combinés souples destinés à l'isolement électrique –
Partie 1: Définitions et exigences générales
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE HICS 29.035.01 PRICE CODECODE PRIXISBN 978-2-88910-236-5
– 2 – 60626-1 © IEC:2009 INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
COMBINED FLEXIBLE MATERIALS
FOR ELECTRICAL INSULATION –
Part 1: Definitions and general requirements
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.