EN IEC 60286-5:2018

Packaging of components for automatic handling - Part 5: Matrix trays

NEW!IEC 60286-5:2018 is available as IEC 60286-5:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60286-5:2018 describes the common dimensions, tolerances and characteristics of the tray. It includes only those dimensions that are essential for the handling of the trays for the stated purpose and for placing or removing components from the trays. This edition includes the following significant technical changes with respect to the previous edition: - The generic rules for the design of matrix trays are given in this document. Newly developed trays which follow these rules will not be listed individually. Only those trays which conform to the design rules set forth herein are classified as "standard trays" and are thus preferred for use. - An update of the matrix trays, which do not conform to the design rules set forth herein, are considered as "non-standard trays" and are not preferred for use, is listed in Annex A.

Gurtung und Magazinierung von Bauelementen für automatische Verarbeitung - Teil 5: Flachmagazine

Emballage de composants pour opérations automatisées - Partie 5: Supports matriciels

NEW!IEC 60286-5:2018 est disponible sous forme de IEC 60286-5:2018 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

Pakiranje komponent za avtomatsko obdelavo - 5. del: Ploščati vlagalniki (IEC 60286-5:2018)

Ta del standarda IEC 60286 opisuje običajne mere, odstopanja in značilnosti vlagalnikov. Vključuje samo tiste mere, ki so bistvene za uporabo vlagalnikov za naveden namen in za nameščanje ali odstranjevanje komponent z vlagalnikov.
Ploščati vlagalniki so zasnovani za lažji transport elektronskih komponent in ravnanje z njimi med preskušanjem, žganjem, transportom/shranjevanjem in končno namestitvijo z opremo za samodejno namestitev.
V tem dokumentu so podana splošna pravila za njihovo projektiranje. Novo razviti vlagalniki, ki so skladni s temi pravili, ne bodo navedeni posamično. Samo tisti vlagalniki, ki izpolnjujejo konstrukcijska pravila, določena v tem dokumentu, so klasificirani kot »standardni vlagalniki« in se uporabljajo prednostno.
OPOMBA: Ploščati vlagalniki, navedeni v Dodatku A, ki ne izpolnjujejo konstrukcijskih pravil, določenih v tem dokumentu, se štejejo kot »nestandardni vlagalniki« in se ne uporabljajo prednostno.

General Information

• Status: Published
• Publication Date: 14-Jun-2018
• Withdrawal Date: 29-May-2021
• ICS: 31.020 - Electronic components in general
• Technical Committee: CLC/SR 40 - Capacitors and resistors for electronic equipment
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 15-Jun-2018
• Completion Date: 15-Jun-2018
• Ref Project: SIST EN IEC 60286-5:2018 - Packaging of components for automatic handling - Part 5: Matrix trays (IEC 60286-5:2018)

Relations

• Replaces: EN 60286-5:2004 - Packaging of components for automatic handling - Part 5: Matrix trays
• Effective Date: 26-Jun-2018
• Replaces: EN 60286-5:2004/A1:2009 - Packaging of components for automatic handling - Part 5: Matrix trays
• Effective Date: 27-Sep-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60286-5:2018
01-september-2018
1DGRPHãþD
SIST EN 60286-5:2005
SIST EN 60286-5:2005/A1:2009
3DNLUDQMHNRPSRQHQW]DDYWRPDWVNRREGHODYRGHO3ORãþDWLYODJDOQLNL,(&

Packaging of components for automatic handling - Part 5: Matrix trays (IEC 60286-
5:2018)
Gurtung und Magazinierung von Bauelementen für automatische Verarbeitung - Teil 5:
Flachmagazine (IEC 60286-5:2018)
Emballage de composants pour opérations automatisées - Partie 5: Supports matriciels
(IEC 60286-5:2018)
Ta slovenski standard je istoveten z: EN IEC 60286-5:2018
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
55.020 Pakiranje in distribucija blaga Packaging and distribution of
na splošno goods in general
SIST EN IEC 60286-5:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 60286-5:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 60286-5:2018


EUROPEAN STANDARD EN IEC 60286-5

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2018
ICS 31.020 Supersedes EN 60286-5:2004
English Version
Packaging of components for automatic handling - Part 5: Matrix
trays
(IEC 60286-5:2018)
Emballage de composants pour opérations automatisées - Gurtung und Magazinierung von Bauelementen für
Partie 5: Supports matriciels automatische Verarbeitung - Teil 5: Flachmagazine
(IEC 60286-5:2018) (IEC 60286-5:2018)
This European Standard was approved by CENELEC on 2018-05-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60286-5:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 60286-5:2018
EN IEC 60286-5:2018 (E)


European foreword
The text of document 40/2556/CDV, future edition 3 of IEC 60286-5, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 60286-5:2018.

The following dates are fixed:
• latest date by which the document has to be (dop) 2019-02-28
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-05-30
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60286-5:2004.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60286-5:2018 was approved by CENELEC as a European
Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN IEC 60286-5:2018



IEC 60286-5

®


Edition 3.0 2018-04




INTERNATIONAL



STANDARD



















Packaging of components for automatic handling –

Part 5: Matrix trays



























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 31.020 ISBN 978-2-8322-5617-6



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 5 ----------------------

SIST EN IEC 60286-5:2018
– 2 – IEC 60286-5:2018 © IEC 2018
CONTENTS
FOREWORD .
...