EN 62541-5:2011

OPC unified architecture - Part 5: Information model

IEC 62541-5:2011 defines the Information Model of the OPC Unified Architecture (OPC UA). The Information Model describes standardised Nodes of a server's AddressSpace. These Nodes are standardised types as well as standardised instances used for diagnostics or as entry points to server specific Nodes. Thus, the Information Model defines the AddressSpace of an empty OPC UA server. However, it is not expected that all servers will provide all of these Nodes.

OPC Unified Architecture - Teil 5: Informationsmodell

Architecture unifiée OPC - Partie 5: Modèle d'information

La CEI 62541-5:2011 définit le modèle d'information d'OPC Unified Architecture (OPC UA). Le Modèle d'information décrit des Nodes (c'est-à-dire des noeuds) normalisés d'un AddressSpace (c'est-à-dire espace d'adresse) d'un serveur. Ces Noeuds sont des types normalisés ainsi que des instances normalisées pour le diagnostic ou comme des points d'entrée à des Nodes spécifiques de serveur. Ainsi, le Modèle d'information définit l'Espace d'adresse d'un serveur OPC UA vide. Il n'est cependant pas demandé que tous les serveurs fournissent la totalité des Nodes.

Poenotena arhitektura OPC - 5. del: Informacijski model (IEC 62541-5:2011)

Ta del standarda IEC 62541 določa informacijski model poenotene arhitekture OPC (OPC
UA). Informacijski model opisuje standardizirana vozlišča strežnikovega naslovnega prostora. Ta vozlišča so standardizirane vrste in primerki, ki se uporabljajo za diagnostiko ali kot vstopne točke v strežniška vozlišča. Informacijski model tako določi naslovni prostor praznega strežnika poenotene arhitekture OPC. Vendar se ne pričakuje, da bodo vsi strežniki zagotovili vsa vozlišča.

General Information

• Status: Withdrawn
• Publication Date: 08-Dec-2011
• Withdrawal Date: 21-Nov-2014
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 25.100.01 - Cutting tools in general
• ICS: 35.100 - Open systems interconnection (OSI)
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Parallel Committee: IEC/SC 65E - IEC_SC_65E
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 29-Apr-2018
• Completion Date: 29-Apr-2018
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 62541-5:2012 - OPC unified architecture - Part 5: Information model (IEC 62541-5:2011)

Relations

• Replaced By: EN 62541-5:2015 - OPC unified architecture - Part 5: Information Model
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62541-5:2012
01-februar-2012
Poenotena arhitektura OPC - 5. del: Informacijski model (IEC 62541-5:2011)
OPC unified architecture - Part 5: Information model (IEC 62541-5:2011)
OPC Unified Architecture - Teil 5: Informationsmodell (IEC 62541-5:2011)
Architecture unifiée OPC - Partie 5: Modèle d'information (CEI 62541-5:2011)
Ta slovenski standard je istoveten z: EN 62541-5:2011
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62541-5:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62541-5:2012

---------------------- Page: 2 ----------------------

SIST EN 62541-5:2012

EUROPEAN STANDARD
EN 62541-5
NORME EUROPÉENNE
December 2011
EUROPÄISCHE NORM

ICS 25.040.40; 25.100.01


English version


OPC unified architecture -
Part 5: Information model
(IEC 62541-5:2011)


Architecture unifiée OPC - OPC Unified Architecture -
Partie 5: Modèle d'information Teil 5: Informationsmodell
(CEI 62541-5:2011) (IEC 62541-5:2011)





This European Standard was approved by CENELEC on 2011-11-22. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62541-5:2011 E

---------------------- Page: 3 ----------------------

SIST EN 62541-5:2012
EN 62541-5:2011 - 2 -

Foreword
The text of document 65E/192/FDIS, future edition 1 of IEC 62541-5, prepared by SC 65E, "Devices and
integration in enterprise systems", of IEC/TC 65, "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 62541-5:2011.
The following dates are fixed:
(dop) 2012-08-22
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2014-11-22

standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 62541-5:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 62541-4 NOTE  Harmonized as EN 62541-4.
IEC 62541-6 NOTE  Harmonized as EN 62541-6.

---------------------- Page: 4 ----------------------

SIST EN 62541-5:2012
- 3 - EN 62541-5:2011
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC/TR 62541-1 - OPC unified architecture - CLC/TR 62541-1 -
Part 1: Overview and concepts


IEC 62541-3 - OPC unified architecture - EN 62541-3 -
Part 3: Address space model

---------------------- Page: 5 ----------------------

S
...