EN 50143:2009
(Main)Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 000 V but not exceeding 10 000 V
Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 000 V but not exceeding 10 000 V
EN 50143 applies to single core cables of rated voltages up to and including 5/10 kV (Uo/U) used with electric signs and high-voltage luminous-discharge-tube installations. These cables are for use in installations complying with EN 50107. The particular types of cables are specified in Clauses 7 to 10 of this standard.
Leitungen für Leuchtröhrengeräte und Leuchtröhren-Anlagen mit einer Leerlaufspannung von über 1 000 V, aber nicht über 10 000 V
EN 50143 gilt für einadrige Leitungen mit einer Nennspannung U0/U bis 5/10 kV zur Verwendung für Leuchtröhrengeräte und Hochspannungs-Leuchtröhrenanlagen. Diese Leitungen sind für die Verwendung in Anlagen vorgesehen, die mit EN 50107 übereinstimmen. Die einzelnen Leitungsbauarten sind in den Abschnitten 7 bis 10 dieser Norm festgelegt.
Câbles pour installations d'enseignes et de tubes à décharges lumineuses fonctionnant avec une tension à vide supérieure à 1 000 V mais ne dépassant pas 10 000 V
La EN 50413 s’applique aux câbles monoconducteurs de tension assignée Uo/U au plus égale à 5/10 kV pour l’emploi avec les enseignes électriques et les installations de tubes à décharges lumineuses. Ces câbles sont prévus pour l’emploi dans des installations conformes à la EN 50107. Les types particuliers de câbles sont spécifiques aux Articles 7 à 10 de la présente norme.
Kabli za znake in svetilne naprave, ki delujejo na neobremenjeni nazivni napetosti nad 1000 V, vendar ne preko 10 000 V
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50143:2009
01-julij-2009
Kabli za znake in svetilne naprave, ki delujejo na neobremenjeni nazivni napetosti
nad 1000 V, vendar ne preko 10 000 V
Cables for signs and luminous-discharge-tube installations operating from a no-load
rated output voltage exceeding 1 000 V but not exceeding 10 000 V
Leitungen für Leuchtröhrengeräte und Leuchtröhren-Anlagen mit einer Leerlaufspannung
von über 1 000 V, aber nicht über 10 000 V
Câbles pour installations d'enseignes et de tubes à décharges lumineuses fonctionnant
avec une tension à vide supérieure à 1 000 V mais ne dépassant pas 10 000 V
Ta slovenski standard je istoveten z: EN 50143:2009
ICS:
29.060.20 Kabli Cables
SIST EN 50143:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50143:2009
---------------------- Page: 2 ----------------------
SIST EN 50143:2009
EUROPEAN STANDARD
EN 50143
NORME EUROPÉENNE
March 2009
EUROPÄISCHE NORM
ICS 29.060.20 Supersedes EN 50143:1997 + A1:2003
English version
Cables for signs and luminous-discharge-tube installations
operating from a no-load rated output voltage
exceeding 1 000 V but not exceeding 10 000 V
Câbles pour installations d'enseignes Leitungen für Leuchtröhrengeräte
et de tubes à décharges lumineuses und Leuchtröhren-Anlagen
fonctionnant avec une tension à vide mit einer Leerlaufspannung von
supérieure à 1 000 V über 1 000 V, aber nicht über 10 000 V
mais ne dépassant pas 10 000 V
This European Standard was approved by CENELEC on 2009-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50143:2009 E
---------------------- Page: 3 ----------------------
SIST EN 50143:2009
EN 50143:2009 – 2 –
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 20, Electric cables.
The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50143 on
2009-02-01.
This European Standard supersedes EN 50143:1997 + A1:2003.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-02-01
__________
---------------------- Page: 4 ----------------------
SIST EN 50143:2009
– 3 – EN 50143:2009
Contents
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Rated voltage . 7
5 General requirements for the construction of cables . 8
5.1 Conductors . 8
5.2 Insulation . 8
5.3 Oversheath .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.