EN 60454-3-4:2007

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive

Contains the requirements for pressure-sensitive adhesive tapes made with cellulosic paper, creped and non-creped, with rubber thermosetting adhesive.

Selbstklebende Bänder für elektrotechnische Anwendungen - Teil 3: Bestimmungen für einzelne Materialien - Blatt 4: Bänder aus gekrepptem und nicht gekrepptem Zellulosepapier mit warmhärtendem Kautschuk-Klebstoff

Rubans adhésifs sensibles à la pression à usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 4: Papier cellulosique,crêpé et non crêpé, avec un adhésif en caoutchouc thermodurcissable

L'IEC 60454-3-4:2007 contient les exigences relatives aux rubans adhésifs sensibles à la pression faits de papier cellulosique crêpé et non crêpé, avec un adhésif en caoutchouc thermodurcissable. Les matériaux qui sont conformes à cette spécification satisfont à des niveaux de performances établis. Cependant, il convient que le choix d'un matériau par un utilisateur et pour une application particulière soit fondé sur les exigences réelles nécessaires pour obtenir les performances satisfaisantes pour cette application, et non pas fondé sur cette seule spécification. Cette troisième édition de la CEI 60454-3-4 remplace la deuxième édition, parue en 1998, ainsi que la CEI 60454-3-5, parue en 1998. Elle constitue une révision technique. Les principales modifications par rapport à la deuxième édition sont la consolidation de cette partie avec la CEI 60454-3-5. Toutes les exigences ont été confirmées. La CEI 60454-3-5 doit être supprimée au moment de cette publication. Mots-clés: rubans adhésifs sensibles à la pression faits de papier cellulosique crêpé et non crêpé, avec un adhésif en caoutchouc thermodurcissable

Samolepilni trakovi za električne namene - 3. del: Specifikacije za posamezne vrste materiale - 4. list: Celulozni papir, nakodran in nenakodran, s toplotno utrjenim gumijevim lepilom (IEC 60454-3-4:2007)

General Information

• Status: Published
• Publication Date: 11-Jul-2007
• Withdrawal Date: 30-Jun-2010
• ICS: 29.035.10 - Paper and board insulating materials
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/TC 15 - IEC_TC_15
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 12-Jul-2007
• Completion Date: 12-Jul-2007
• Ref Project: SIST EN 60454-3-4:2007 - Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive

Relations

• Replaces: EN 60454-3-4:1998 - Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulosic paper, creped, with rubber thermosetting adhesive
• Effective Date: 29-Jan-2023
• Replaces: EN 60454-3-5:1998 - Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 5: Cellulosic paper, non-creped, with rubber thermosetting adhesive
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2007
1DGRPHãþD
SIST EN 60454-3-4:2001
SIST EN 60454-3-5:2001
6DPROHSLOQLWUDNRYL]DHOHNWULþQHQDPHQHGHO6SHFLILNDFLMH]DSRVDPH]QHYUVWH
PDWHULDOHOLVW&HOXOR]QLSDSLUQDNRGUDQLQQHQDNRGUDQVWRSORWQRXWUMHQLP
JXPLMHYLPOHSLORP,(&
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for
individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber
thermosetting adhesive (IEC 60454-3-4:2007)
Selbstklebende Bänder für elektrotechnische Anwendungen - Teil 3: Bestimmungen für
einzelne Materialien - Blatt 4: Bänder aus gekrepptem und nicht gekrepptem
Zellulosepapier mit warmhärtendem Kautschuk-Klebstoff (IEC 60454-3-4:2007)
Rubans adhésifs sensibles a la pression a usages électriques - Partie 3: Spécifications
pour matériaux particuliers - Feuille 4 : Papier cellulosique,crepé et non crepé, avec un
adhésif en caoutchouc thermodurcissable (IEC 60454-3-4:2007)
Ta slovenski standard je istoveten z: EN 60454-3-4:2007
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60454-3-4
NORME EUROPÉENNE
July 2007
EUROPÄISCHE NORM
ICS 29.035.20 Supersedes EN 60454-3-4:1998 and EN 60454-3-5:1998

English version
Pressure-sensitive adhesive tapes for electrical purposes -
Part 3: Specifications for individual materials -
Sheet 4: Cellulose paper, creped and non-creped,
with rubber thermosetting adhesive
(IEC 60454-3-4:2007)
Rubans adhésifs sensibles  Selbstklebende Bänder
à la pression à usages électriques - für elektrotechnische Anwendungen -
Partie 3: Spécifications Teil 3: Bestimmungen
pour matériaux particuliers - für einzelne Materialien -
Feuille 4: Papier cellulosique, Blatt 4: Bänder aus gekrepptem
crêpé et non crêpé, avec un adhésif und nicht gekrepptem Zellulosepapier
en caoutchouc thermodurcissable mit warmhärtendem Kautschuk-Klebstoff
(CEI 60454-3-4:2007) (IEC 60454-3-4:2007)

This European Standard was approved by CENELEC on 2007-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60454-3-4:2007 E
Foreword
The text of document 15/369/FDIS, future edition 3 of IEC 60454-3-4, prepared by IEC TC 15, Solid
electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60454-3-4 on 2007-07-01.
This European Standard supersedes EN 60454-3-4:1998 and EN 60454-3-5:1998.
The main changes with regard to EN 60454-3-4:1998 is the consolidation of Parts 3-4 and 3-5.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60454-3-4:2007 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60454-3-4:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1)
IEC 60426 1973 Test methods for determining electrolytic - -
corrosion with insulating materials

IEC 60454-1 1992 Specifications for pressure-sensitive adhesive EN 60454-1 1994
tapes for electrical purposes -
Part 1: General requirements
2) 3)
IEC 60454-2 - Pressure-sensitive adhesive tapes for EN 60454-2 200X
electrical purposes -
Part 2: Methods of test
1)
IEC 60426:1973 is superseded by IEC 60426:2007, which is harmonized as EN 60426:2007.
2)
Undated reference.
3)
To be ratified.
INTERNATIONAL IEC
STANDARD 60454-3-4
Third edition
2007-06
Pressure-sensitive adhesive tapes
for electrical purposes –
Part 3:
Specifications for individual materials –
Sheet 4: Cellulose paper, creped and non-creped,
with rubber thermosetting adhesive

PRICE CODE
Commission Electrotechnique Internationale H
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 60454-3-4 © IEC:2007(E)
CONTENTS
FOREWORD.3
INTRODUCTION.5

1 Scope.6
2 Normative references.6
3 Terms and definitions .6
4 Classification and designation.6
Cellulose paper, creped and non-creped, with rubber thermosetting adhesive.6
5 Requirements .7
6 Test methods.7
7 Marking, labelling and packaging .7

Table 1 – Requirements for all types .8

60454-3-4 © IEC:2007(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
PRESSURE-SENSITIVE ADHESIVE TAPES
FOR ELECTRICAL PURPOSES –
Part 3: Specifications for individual materials –
Sheet 4: Cellulose paper, creped and non-creped,
with rubber thermosetting adhesive

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. I
...