EN 60454-2:2007
(Main)Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test
Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test
Describes methods of determining the mechanical and electrical resistance and the adhesive properties of pressure-sensitive adhesive tapes, and the test methods to be used.
Selbstklebende Bänder für elektrotechnische Anwendungen - Teil 2: Prüfverfahren
Rubans adhésifs sensibles à la pression à usages électriques - Partie 2: Méthodes d'essai
Décrit les méthodes pour déterminer la résistance mécanique et électrique et les propriétés adhésives des rubans adhésifs sensibles à la pression, et contient les méthodes d'essai à utiliser.
Samolepilni trakovi za električne namene - 2. del: Preskuševalne metode (IEC 60454-2:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60454-2:2007
01-december-2007
1DGRPHãþD
SIST EN 60454-2:1998
6DPROHSLOQLWUDNRYL]DHOHNWULþQHQDPHQHGHO3UHVNXãHYDOQHPHWRGH,(&
Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test (IEC
60454-2:2007)
Selbstklebende Bänder für elektrotechnische Anwendungen - Teil 2: Prüfverfahren (IEC
60454-2:2007)
Rubans adhésifs sensibles a la pression a usages électriques - Partie 2: Méthodes
d'essai (IEC 60454-2:2007)
Ta slovenski standard je istoveten z: EN 60454-2:2007
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST EN 60454-2:2007 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 60454-2
NORME EUROPÉENNE
September 2007
EUROPÄISCHE NORM
ICS 17.220.99; 29.035.20 Supersedes EN 60454-2:1995
English version
Pressure-sensitive adhesive tapes for electrical purposes -
Part 2: Methods of test
(IEC 60454-2:2007)
Rubans adhésifs sensibles Selbstklebende Bänder
à la pression à usages électriques - für elektrotechnische Anwendungen -
Partie 2: Méthodes d'essai Teil 2: Prüfverfahren
(CEI 60454-2:2007) (IEC 60454-2:2007)
This European Standard was approved by CENELEC on 2007-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60454-2:2007 E
---------------------- Page: 2 ----------------------
EN 60454-2:2007 - 2 -
Foreword
The text of document 15/377/FDIS, future edition 3 of IEC 60454-2, prepared by IEC TC 15, Solid
electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60454-2 on 2007-09-01.
This European Standard supersedes EN 60454-2:1995.
This revision includes improved text regarding the flame test (Clause 20), improved text on adhesion
(Clause 11) and new Figures 9a and 9b.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-06-01
national standard or by endorsement
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60454-2:2007 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60454-2:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
- - Self-adhesive tapes - Determination of peel EN 1939 2003
adhesion properties
IEC 60216-1 2001 Electrical insulating materials - Properties of EN 60216-1 2001
thermal endurance -
Part 1: Ageing procedures and evaluation of
test results
IEC 60216-2 2005 Electrical insulating materials - Thermal EN 60216-2 2005
endurance properties -
Part 2: Determination of thermal endurance
properties of electrical insulating materials -
Choice of test criteria
IEC
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.