Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols

Provides guidelines for the application of graphical symbols for use on equipment in order to maintain visual clarity and overall consistency when such graphical symbols are applied. It stipulates the permissible extent by which a symbol original may be modified in reproduction for actual use on equipment

Allgemeine Grundlagen für Graphische Symbole auf Geräten und Einrichtungen - Teil 3: Leitfaden zur Anwendung Graphischer Symbole

Principes élémentaires pour les symboles graphiques utilisables sur le matériel - Partie 3: Guide pour l'application des symboles graphiques

Fournit les modes d'emploi pour l'utilisation des symboles graphiques utilisables sur le matériel pour maintenir une clarté visuelle et surtout une uniformité quand de tels symboles graphiques sont utilisés. Elle délimite l'étendue admissible dans laquelle un symbole graphique peut être modifié pour une utilisation effective sur le matériel.

Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols (IEC 80416-3:2002

General Information

Status
Published
Publication Date
22-Oct-2002
Withdrawal Date
30-Sep-2005
Current Stage
6060 - Document made available - Publishing
Start Date
23-Oct-2002
Completion Date
23-Oct-2002

Relations

Buy Standard

Standard
EN 80416-3:2003
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SIST EN 80416-3:2003SLOVENSKImaj 2003
STANDARDBasic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols (IEC 80416-3:2002©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 80416-3:2003(en)ICS01.080.20; 29.020







EUROPEAN STANDARD
EN 80416-3 NORME EUROPÉENNE EUROPÄISCHE NORM
October 2002 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 80416-3:2002 E
ICS 01.080.20
English version
Basic principles for graphical symbols for use on equipment Part 3: Guidelines for the application of graphical symbols (IEC 80416-3:2002)
Principes élémentaires pour les symboles graphiques utilisables sur le matériel Partie 3: Guide pour l'application
des symboles graphiques (CEI 80416-3:2002)
Allgemeine Grundlagen für Graphische Symbole auf Einrichtungen Teil 3: Leitfaden zur Anwendung Graphischer Symbole (IEC 80416-3:2002)
This European Standard was approved by CENELEC on 2002-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.



EN 80416-3:2002 - 2 - Foreword The text of document 3C/917/FDIS, future edition 1 of IEC 80416-3, prepared by SC 3C, Graphical symbols for use on equipment, of IEC TC 3, Information structures, documentation and graphical symbols, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 80416-3 on 2002-10-01. The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2003-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2005-10-01 Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 80416-3:2002 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60617 (Series) NOTE Harmonized as EN 60617 (Series) (not modified). __________



- 3 - EN 80416-3:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 80416-1 - 1) Basic principles for graphical symbols for use on equipment Part 1: Creation of symbol originals
EN 80416-1 2001 2) ISO 80416-2 - 1) Part 2: Form and use of arrows
EN 80416-2 2001 2) ISO 3864-1 - 1) Graphical symbols - Safety colours and safety signs Part 1: Design principles for safety signs in workplaces and public areas
- - IEC 60073 - 1) Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
EN 60073 2002 2) ISO/DIS 7010 2001 Graphical symbols - Safety signs in workplaces and public areas
- - ISO 7000 - 1) Graphical symbols for use on equipment - Index and synopsis
- - IEC 60417 Series Graphical symbols for use on equipment
EN 60417 Series
1) Undated referen
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.