prEN 60417-1
(Main)Graphical symbols for use on equipment - Part 1: Overview and application
Graphical symbols for use on equipment - Part 1: Overview and application
Contains a presentation of the graphical symbols with the corresponding descriptions in numerical order which does not necessarily represent any functional grouping. It is complemented by an alphabetical index and a graphical survey of the symbols. Additional information is provided to the user by classifications to form and function, and the examples of application. EN 60417-1 and 60417-2 cancel and replace EN 60417 and all its supplements.
Graphische Symbole für Betriebsmittel - Teil 1: Übersicht und Anwendung
Symboles graphiques utilisables sur le matériel - Partie 1: Vue d'ensemble et application
Graphical symbols for use on equipment - Part 1: Overview and application (IEC 60417-1:2000)
General Information
Standards Content (Sample)
SLOVENSKI SIST EN 60417-1:2003
STANDARD
maj 2003
Graphical symbols for use on equipment - Part 1: Overview and application (IEC
60417-1:2000)
ICS 01.080.20; 29.020; 33.020 Referenčna številka
SIST EN 60417-1:
...
This May Also Interest You
International Standard 80416 is a multi-part standard which provides principles and guidelines for the creation and application of graphical symbols for use on equipment. This part of IEC 80416 provides guidelines for the application of graphical symbols for use on equipment in order to maintain visual clarity and overall consistency when such graphical symbols are applied. It stipulates the permissible extent by which a symbol original may be modified in reproduction for actual use on equipment.
- Amendment9 pagesEnglish languagesale 10% offe-Library read for×1 day
IEC 80416-1:2008 provides basic principles and guidelines for the creation of graphical symbols for registration, and provides the key principles and rules for the preparation of title, description and note(s). This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - a) Clause 8 in the previous edition is moved to Clause 4; - b) Mandatory requirement for the line width in symbol originals is changed to 2 mm or 4 mm (see 6th paragraph of 7.3); - c) For negation of a graphical symbol, a single diagonal bar is allowed in addition to two diagonal bars at right angles; - d) A new meaning of negation 'do not' is allowed; - e) Some freedom is given for use of the basic pattern such as for symbol originals to be within the 75 mm square instead of the octagon; - f) Annex A (normative) is newly introduced for provisions on title, description and notes; - g) The nature of notes is changed to be purely informative; and - h) Clause 10 in the previous edition is moved to Annex C (informative). It has the status of a horizontal standard in accordance with IEC Guide 108. This International Standard has been prepared in co-operation with ISO/TC145/SC 3. It is published as a double logo standard.
- Standard25 pagesEnglish languagesale 10% offe-Library read for×1 day
Provides guidelines for the application of graphical symbols for use on equipment in order to maintain visual clarity and overall consistency when such graphical symbols are applied. It stipulates the permissible extent by which a symbol original may be modified in reproduction for actual use on equipment
- Standard15 pagesEnglish languagesale 10% offe-Library read for×1 day
EN following parallel vote
- Standard10 pagesEnglish languagesale 10% offe-Library read for×1 day
D113/043: Ratification revoked
- Amendment40 pagesEnglish languagesale 10% offe-Library read for×1 day
IEC 60445:2021 is available as IEC 60445:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60445:2021 applies to the identification and marking of terminals of electrical equipment such as resistors, fuses, relays, contactors, transformers, rotating machines and, wherever applicable, to combinations of such equipment (e.g. assemblies), and also applies to the identification of terminations of certain designated conductors. It also provides general rules for the use of certain colours or alphanumeric notations to identify conductors with the aim of avoiding ambiguity and ensuring safe operation. These conductor colours or alphanumeric notations are intended to be applied in cables or cores, busbars, electrical equipment and installations. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It has the status of a basic safety publication in accordance with IEC Guide 104. IEC 60445:2021 cancels and replaces the sixth edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the definitions have been aligned with IEC 60050-195:2021 and IEC 60050-826; b) the provisions for colour to be used for identification of certain designated conductors are made requirements and not only recommendations; c) introduction of a new subclause on marking of protective terminals for multiple power supply inputs on equipment.
- Standard29 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft27 pagesEnglish languagesale 10% offe-Library read for×1 day
NEW!IEC 60445:2017 is available as IEC 60445:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60445:2017 applies to the identification and marking of terminals of electrical equipment such as resistors, fuses, relays, contactors, transformers, rotating machines and, wherever applicable, to combinations of such equipment (e.g. assemblies), and also applies to the identification of terminations of certain designated conductors. It also provides general rules for the use of certain colours or alphanumeric notations to identify conductors with the aim of avoiding ambiguity and ensuring safe operation. These conductor colours or alphanumeric notations are intended to be applied in cables or cores, busbars, electrical equipment and installations. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It has the status of a basic safety publication in accordance with IEC Guide 104.This sixth edition cancels and replaces the fifth edition of IEC 60445, published in 2010. This edition includes the following significant technical changes with respect to the previous edition: a) the text of the introduction has been moved into the scope in accordance with IEC Guide 104; b) colour codes for the identification of line conductors of DC systems; c) colour code for the identification of functional earthing conductor; d) update of Table A.1with colour codes for DC line conductors; e) conversion of notes containing non-mandatory requirements to normative text; f) the terminology is aligned with IEC 60050-195.
- Standard29 pagesEnglish languagesale 10% offe-Library read for×1 day
IEC 62744:2014 provides generic rules for the representation of states of objects by graphical symbols standardized in IEC 60617, ISO 14617, IEC 60417, for example, and for future graphical symbols included in these standards. It also provides operational states of an object as examples that typically occur and which need to be represented by standardized graphical symbols and defines generic rules to be applied. It specifies which types of presentation facilities are recommended to present the different operational states to humans.
- Standard35 pagesEnglish languagesale 10% offe-Library read for×1 day
International Standard 80416 is a multi-part standard which provides principles and guidelines for the creation and application of graphical symbols for use on equipment. This part of IEC 80416 provides guidelines for the application of graphical symbols for use on equipment in order to maintain visual clarity and overall consistency when such graphical symbols are applied. It stipulates the permissible extent by which a symbol original may be modified in reproduction for actual use on equipment.
- Amendment9 pagesEnglish languagesale 10% offe-Library read for×1 day
IEC 80416-1:2008 provides basic principles and guidelines for the creation of graphical symbols for registration, and provides the key principles and rules for the preparation of title, description and note(s). This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - a) Clause 8 in the previous edition is moved to Clause 4; - b) Mandatory requirement for the line width in symbol originals is changed to 2 mm or 4 mm (see 6th paragraph of 7.3); - c) For negation of a graphical symbol, a single diagonal bar is allowed in addition to two diagonal bars at right angles; - d) A new meaning of negation 'do not' is allowed; - e) Some freedom is given for use of the basic pattern such as for symbol originals to be within the 75 mm square instead of the octagon; - f) Annex A (normative) is newly introduced for provisions on title, description and notes; - g) The nature of notes is changed to be purely informative; and - h) Clause 10 in the previous edition is moved to Annex C (informative). It has the status of a horizontal standard in accordance with IEC Guide 108. This International Standard has been prepared in co-operation with ISO/TC145/SC 3. It is published as a double logo standard.
- Standard25 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.