prEN 50441-5:2017
(Main)Cables for indoor residential telecommunication installations - Part 5: Cables up to 2 200 Mhz for one pair and remaining pairs up to 1 000 Mhz
Cables for indoor residential telecommunication installations - Part 5: Cables up to 2 200 Mhz for one pair and remaining pairs up to 1 000 Mhz
2018-11-28: WI deleted following the flexible timeframe rule.
Innenkabel für Telekommunikationseinrichtungen im Wohnbereich – Teil 5: Kabel bis 2 200 MHz für ein Paar und für die übrigen Paare bis 1 000 Mhz
Câbles pour les installations résidentielles de télécommunications en intérieur - Partie 5: Câbles caractérisés jusqu'à 2 200 Mhz pour une seule paire et les autres paires jusqu'à 1 000 Mhz
Kabli za notranjo stanovanjsko telekomunikacijsko montažo - 5. del: Kabli za frekvence do 2200 MHz za en par in za preostale pare do 1000 MHz
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2017
Kabli za notranjo stanovanjsko telekomunikacijsko montažo - 5. del: Kabli za
frekvence do 2200 MHz za en par in za preostale pare do 1000 MHz
Cables for indoor residential telecommunication installations - Part 5: Cables up to 2 200
Mhz for one pair and remaining pairs up to 1 000 Mhz
Câbles pour les installations résidentielles de télécommunications en intérieur - Partie 5:
Câbles caractérisés jusqu'à 2 200 Mhz pour une seule paire et les autres paires jusqu'à
1 000 Mhz
Ta slovenski standard je istoveten z: prEN 50441-5:2017
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
prEN 50441-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2017
ICS
English Version
Cables for indoor residential telecommunication installations -
Part 5: Cables up to 2 200 Mhz for one pair and remaining pairs
up to 1 000 Mhz
Câbles pour les installations résidentielles de
télécommunications en intérieur - Partie 5: Câbles
caractérisés jusqu'à 2 200 Mhz pour une seule paire et les
autres paires jusqu'à 1 000 Mhz
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2017-07-21.
It has been drawn up by CLC/SC 46XC.
If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 60376 Ref. No. prEN 50441-5:2017 E
1 Contents Page
2 European foreword .4
3 1 Scope .5
4 2 Normative references .5
5 3 Cable construction .6
6 3.1 Conductors .6
7 3.1.1 Conductor construction .6
8 3.1.2 Conductor Type .6
9 3.2 Insulation .6
10 3.2.1 Insulation material .6
11 3.2.2 Thickness of the insulation .6
12 3.2.3 Colour of the insulated conductor .6
13 3.3 Cable element .6
14 3.4 Screening of the cable element .6
15 3.5 Cabling .7
16 3.6 Spare pairs .7
17 3.7 Colour code .7
18 3.8 Screening and wrapping of the core.7
19 3.8.1 Core wrapping .7
20 3.8.2 Screen .7
21 3.9 Sheath .7
22 3.9.1 Sheath material .7
23 3.9.2 Sheath construction .7
24 3.9.3 Thickness of the sheath .7
25 3.10 Ripcord .7
26 3.11 Overall diameter .7
27 3.12 Identification .8
28 3.12.1 General .8
29 3.12.2 Sheath marking .8
30 3.12.3 Identification thread.8
31 3.13 Delivery length .8
32 3.13.1 Labelling .8
33 3.13.2 End caps .8
34 4 Mechanical requirements .9
35 4.1 Conductor .9
36 4.2 Insulation .9
37 4.3 Sheath .9
38 4.4 Finished cable .9
39 4.4.1 Sheath integrity .9
40 4.4.2 Static bending radius .9
41 4.4.3 Abrasion resistance of the sheath .9
42 4.4.4 Kink test .9
43 4.4.5 Cut-through test .9
44 4.4.6 Adhesion of the sheath .9
45 4.4.7 Installation capability . 10
46 5 Environmental and climatic requirements . 11
47 5.1 Insulation . 11
48 5.2 Sheath . 11
49 5.3 Fire behaviour . 12
50 6 Electrical requirements . 12
51 General . 12
6.1
52 Conductor resistance . 12
6.2
53 Dielectric strength and capacitance . 12
6.3
54 Insulation resistance . 12
6.4
55 High frequency characteristics . 12
6.5
56 General . 12
6.5.1
57 Impedance . 12
6.5.2
58 Return loss . 12
6.5.3
59 Attenuation . 13
6.5.4
60 Crosstalk . 14
6.5.5
61 Delay and skew . 15
6.5.6
62 Electromagnetic behaviour . 15
6.6
63 Transfer impedance . 15
6.6.1
64 Coupling attenuation . 15
6.6.2
65 Screening attenuation . 15
6.6.3
66 Unbalance attenuation . 15
6.7
67 Environmental and safety aspects . 15
6.8
69 European foreword
70 This document [prEN 50441-5:2017] has been prepared by WG 2 of CLC/SC 46XC, "Multicore, multipair and
71 quad data communication cables", of CLC/TC 46X, "Communication cables".
72 This document is currently submitted to the Enquiry.
73 The following dates are proposed:
• latest date by which the existence of (doa) dor + 6 months
this document has to be announced
at national level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to (to be confirmed or
be withdrawn modified when voting)
74 EN 50441-5 is to be read in conjunction with EN 50441-1.
75 1 Scope
76 This European Standard covers cables for installation in indoor Residential Cabling Systems. The cables are
77 specified up to 2 200 MHz for only 1 pair and the remaining pairs to 1 000 MHz. Their design is based on the
78 requirements of EN 50290-2-1. They are specifically designed for cabling in residential environments supporting
79 ICT and BCT applications (Telephone, Computer and TV services). This specification defines the constructional
80 details as well as the specific performances of the cables.
81 Unless otherwise specified, all cables covered by this standard may be subjected to voltages not more than
82 300 V a.c. or 450 V d.c. and will meet the essential requirements of the low voltage directive. Due to current
83 limitation related to the conductor cross sectional area, they are not intended for direct connection to mains
84 electricity supply. The maximum current rating per conductor is less than or equal to 3 A/mm unless otherwise
85 specified in the relevant detail specification.
86 2 Normative references
87 The following documents are referred to in the text in such a way that some or all of their content constitutes
88 requirements of this document. For dated references, only the edition cited applies. For undated references, the
89 latest edition of the referenced document (including any amendments) applies.
90 EN 50173:2007, Information technology - Generic cabling systems
91 EN 50289-1-2, Communication cables - Specifications for test methods - Part 1-2: Electrical test methods - DC
92 resistance
93 EN 50289-1-3, Communication cables - Specifications for test methods - Part 1-3: Electrical test methods -
94 Dielectric strength
95 EN 50289-1-4, Communication cables - Specifications for test methods - Part 1-4: Electrical test methods -
96 Insulation resistance
97 EN 50289-1-6:2002, Communication cables - Specifications for test methods - Part 1-6: Electrical test methods
98 - Electromagnetic performance
99 EN 50289-1-8, Communication cables - Specifications for test methods - Part 1-8: Electrical test methods -
100 Attenuation
101 EN 50289-1-10, Communication cables - Specifications for test methods - Part 1-10: Electrical test methods -
102 Crosstalk
103 EN 50289-1-11:2016, Communication cables - Specifications for test methods - Part 1-11: Electrical test
104 methods - Characteristic impedance, input impedance, return loss
105 EN 50289-3-7, Communication cables - Specifications for test methods - Part 3-7: Mechanical test methods -
106 Abrasion resistance of the cable sheath
107 EN 50289-3-9:2001, Communication cables - Specifications for test methods - Part 3-9: Mechanical test
108 methods - Bending tests
109 EN 50289-3-17, Communication cables - Specifications for test methods - Part 3-17: Mechanical test methods
110 - Adhesion of dielectric and sheath
111 EN 50290-2-1:2005, Communication cables - Part 2-1: Common design rules and construction
112 EN 50290-2-22, Communication cables - Part 2-22: Common design rules and construction - PVC sheathing
113 compounds
114 EN 50290-2-23, Communication cables - Part 2-23: Common design rules and construction - Polyethylene
115 insulation for multi-pair cables used in access telecommunication networks: Outdoor cables
116 EN 50290-2-27, Communication cables - Part 2-27: Common design rules and construction - Halogen free flame
117 retardant thermoplastic sheathing compounds
118 EN 60332-1-2, Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame
119 propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
120 EN 60794-1-2:2014, Optical fibre cables - Part 1-2: Generic specification - Cross reference table for optical
121 cable test procedures (IEC 60794-1-2:2013)
122 EN 60811-202, Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General
123 tests - Measurement of thickness of non-metallic sheath (IEC 60811-202)
124 EN 62230, Electric cables - S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.