Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws

Work initiated by IEC/SC 61F transferred to IEC/TC 116 * Ratified as A1 to EN 60745-2-13:2009 (which supersedes EN 60745-2-13:2007) with regular dates (confirmed on 2010-08-11)

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-13: Besondere Anforderungen für Kettensägen

Outils électroportatifs à moteur - Sécurité - Partie 2-13: Règles particulières pour les scies à chaîne

Električna ročna orodja - Varnost - 2-13. del: Posebne zahteve za verižne žage - Dopolnilo A1 (IEC 60745-2-13:2006/A1:2009)

Ta standard velja za verižne žage za žaganje lesa in načrtovane, da jih uporablja ena oseba. Ta standard ne zajema verižnih žag, načrtovanih za uporabo skupaj z vodilno ploščo in cepilnim nožem ali kakor koli drugače kot s podporo ali stacionarnim oziroma premičnim strojem.

General Information

Status
Published
Publication Date
02-Dec-2010
Withdrawal Date
30-Nov-2013
Current Stage
6060 - Document made available - Publishing
Start Date
03-Dec-2010
Completion Date
03-Dec-2010

Relations

Buy Standard

Amendment
EN 60745-2-13:2009/A1:2011
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-13:2009/A1:2011
01-februar-2011
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DYHULåQHåDJH
'RSROQLOR$ ,(&$
Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for
chain saws (IEC 60745-2-13:2006/A1:2009)
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-13: Besondere
Anforderungen für Kettensägen (IEC 60745-2-13:2006/A1:2009)
Outils électroportatifs à moteur - Sécurité - Partie 2-13: Règles particulières pour les
scies à chaîne (CEI 60745-2-13:2006/A1:2009)
Ta slovenski standard je istoveten z: EN 60745-2-13:2009/A1:2010
ICS:
25.140.20 (OHNWULþQDRURGMD Electric tools
65.060.80 Gozdarska oprema Forestry equipment
SIST EN 60745-2-13:2009/A1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60745-2-13:2009/A1:2011

---------------------- Page: 2 ----------------------

SIST EN 60745-2-13:2009/A1:2011

EUROPEAN STANDARD
EN 60745-2-13/A1

NORME EUROPÉENNE
December 2010
EUROPÄISCHE NORM

ICS 25.140.20;65.060.80


English version


Hand-held motor-operated electric tools -
Safety -
Part 2-13: Particular requirements for chain saws
(IEC 60745-2-13:2006/A1:2009)


Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-13: Règles particulières pour les Sicherheit -
scies à chaîne Teil 2-13: Besondere Anforderungen für
(CEI 60745-2-13:2006/A1:2009) Kettensägen
(IEC 60745-2-13:2006/A1:2009)




This amendment A1 modifies the European Standard EN 60745-2-13:2009; it was approved by CENELEC on
2010-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-13:2009/A1:2010 E

---------------------- Page: 3 ----------------------

SIST EN 60745-2-13:2009/A1:2011
EN 60745-2-13:2009/A1:2010 - 2 -
Foreword
The text of document 116/17/FDIS, future amendment 1 to IEC 60745-2-13:2006, prepared by TC 116,
Safety of hand-held motor-operated electric tools, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as amendment A1 to EN 60745-2-13:2009 on 2010-12-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
(dop) 2011-09-01
an identical national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-12-01
with the amendment have to be withdrawn
This amendment to European Standard has been prepared under a mandate given to CENELEC by the
European Commission and the European Free Trade Association and covers essential requirements of
EC Directive 2006/42/EC. See Annex ZZ of EN 60745-2-13:2009.
__________
Endorsement notice
The text of amendment 1:2009 to the International Standard IEC 60745-2-13:2006 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60745-2-13:2009/A1:2011
IEC 60745-2-13
®
Edition 2.0 2009-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Hand-held motor-operated electric tools – Safety –
Part 2-13: Particular requirements for chain saws

Outils électroportatifs à moteur – Sécurité –
Partie 2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.