Winding wires - Test methods - Part 5: Electrical properties

This part of IEC 60851 specifies the following tests: - Test 5: Electrical resistance; - Test 13: Breakdown voltage; - Test 14: Continuity of insulation; - Test 19: Dielectric dissipation factor; - Test 23: Pin hole. For definitions, general notes on methods of test and the complete series of methods of test for winding wires, see IEC 60851-1.

Wickeldrähte - Prüfverfahren - Teil 5: Elektrische Eigenschaften

Fils de bobinage - Méthodes d’essai - Partie 5: Propriétés électriques

Navijalne žice - Preskusne metode - 5. del: Električne lastnosti - Dopolnilo A2 (IEC 60851-5:2008/A2:2019)

Ta del IEC 60851 določa naslednje preskuse: - Preskus 5: Električna upornost; - Preskus 13: Prebojna napetost; - Preskus 14: Neprekinjenost izolacije; - Preskus 19: Dielektrični faktor izgube; - Preskus 23: Poroznost. Za definicije, splošne opombe glede preskusnih metod in celoten niz preskusnih metod za navijalne žice glej IEC 60851-1.

General Information

Status
Published
Publication Date
14-Nov-2019
Withdrawal Date
24-Oct-2022
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
15-Nov-2019
Due Date
20-Sep-2019
Completion Date
15-Nov-2019

Relations

Buy Standard

Amendment
EN 60851-5:2009/A2:2020
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2020
Navijalne žice - Preskusne metode - 5. del: Električne lastnosti - Dopolnilo A2 (IEC
60851-5:2008/A2:2019)
Winding wires - Test methods - Part 5: Electrical properties (IEC 60851-5:2008/A2:2019)
Wickeldrähte - Prüfverfahren - Teil 5: Elektrische Eigenschaften (IEC 60851-
5:2008/A2:2019)
Fils de bobinage - Méthodes d'essai - Partie 5: Propriétés électriques (IEC 60851-
5:2008/A2:2019)
Ta slovenski standard je istoveten z: EN 60851-5:2008/A2:2019
ICS:
29.060.10 Žice Wires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60851-5:2008/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2019
ICS 29.060.10
English Version
Winding wires - Test methods - Part 5: Electrical properties
(IEC 60851-5:2008/A2:2019)
Fils de bobinage - Méthodes d'essai - Partie 5: Propriétés Wickeldrähte - Prüfverfahren - Teil 5: Elektrische
électriques Eigenschaften
(IEC 60851-5:2008/A2:2019) (IEC 60851-5:2008/A2:2019)
This amendment A2 modifies the European Standard EN 60851-5:2008; it was approved by CENELEC on 2019-10-25. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60851-5:2008/A2:2019 E

European foreword
The text of document 55/1791/FDIS, future IEC 60851-5/A2, prepared by IEC/TC 55 "Winding wires"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60851-
5:2008/A2:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-07-25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-10-25
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.