iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 55103-2:1996

(Main)

Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity

Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity

This standard for EMC immunity requirements applies to professional audio, video, audio-visual and entertainment lighting control apparatus as defined in clause 4 intended for use in the environments described in clause 5. This includes the digital apparatus defined in 4.5 and sub-assemblies, see 7.4. Disturbances in the frequency range 0 Hz to 400 GHz are covered, but requirements are not established over the whole of that range. NOTE 1 : In annex C, information is included on infra-red radiation in the wave length range 0,7æm to 1,6æm. Fault conditions of source or victim apparatus are not taken into account. Apparatus as defined in 4.4, 4.5 and 4.6 may be operated with any source of power. NOTE 2: Sources of power may include, for example: . the public low-voltage supply; . private supplies with similar characteristics; . a d.c. source provided specifically for the apparatus; . batteries internal to the apparatus; . stand by generators. NOTE 3: In special cases, for instance if it is intended to use a hand-held transmitter in proximity, additional mitigative measures may have to be employed to increase the electromagnetic Immunity further, beyond the specified limits. This standard does not apply to: . consumer apparatus . apparatus specifically designed for security systems . apparatus designed to radiate electromagnetic energy for radio communications purposes

Elektromagnetische Verträglichkeit - Produktfamiliennorm für Audio-, Video- und audiovisuelle Einrichtungen sowie für Studio-Lichtsteuereinrichtungen für professionellen Einsatz - Teil 2: Störfestigkeit

Compatibilité électromagnétique - Norme de famille de produits pour les appareils à usage professionnel audio, vidéo, audiovisuels et de commande de lumière pour spectacles - Partie 2: Immunité

Electromagnetic compatibilty (EMC) - Product family standard for audio, video, audio-visual and entertainment ligthing control apparatus for professional use - Part 2: Immunity

General Information

Status
Withdrawn
Publication Date
05-Nov-1996
Withdrawal Date
31-Aug-1999
ICS
29.020 - Electrical engineering in general
Technical Committee
CLC/TC 210 - Electromagnetic Compatibility (EMC)
Drafting Committee
IEC/TC 100 - IEC_TC_100
Parallel Committee
IEC/TC 100 - IEC_TC_100
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Jul-2012
Completion Date
01-Jul-2012
Directive
2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
89/336/EEC - Electromagnetic compatibility (EMC)
Mandate
BC/CLC/92-02 - BC/CLC/92-02
M/404 - Standardisation Mandate to CEN, CENELEC and ETSI for harmonized standard according to the Electro Magnetic Compatibility (EMC) Directive 2004/108/EC
Ref Project
SIST EN 55103-2:1998 - Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use -- Part 2: Immunity

Relations

Replaced By
EN 55103-2:2009 - Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity
Effective Date
28-Jan-2023

Buy Standard

EN 55103-2:1998EN 55103-2:1998
PreviousNext
Standard
EN 55103-2:1998
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 55103-2:1998
01-september-1998
Electromagnetic compatibilty (EMC) - Product family standard for audio, video,
audio-visual and entertainment ligthing control apparatus for professional use -
Part 2: Immunity
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use -- Part 2: Immunity
Elektromagnetische Verträglichkeit - Produktfamiliennorm für Audio-, Video- und
audiovisuelle Einrichtungen sowie für Studio-Lichtsteuereinrichtungen für professionellen
Einsatz -- Teil 2: Störfestigkeit
Compatibilité électromagnétique - Norme de famille de produits pour les appareils à
usage professionnel audio, vidéo, audiovisuels et de commande de lumière pour
spectacles -- Partie 2: Immunité
Ta slovenski standard je istoveten z: EN 55103-2:1996
ICS:
33.100.20 Imunost Immunity
33.160.01 Avdio, video in avdiovizualni Audio, video and audiovisual
sistemi na splošno systems in general
SIST EN 55103-2:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 55103-2:1998

---------------------- Page: 2 ----------------------

SIST EN 55103-2:1998

---------------------- Page: 3 ----------------------

SIST EN 55103-2:1998

---------------------- Page: 4 ----------------------

SIST EN 55103-2:1998

---------------------- Page: 5 ----------------------

SIST EN 55103-2:1998

---------------------- Page: 6 ----------------------

SIST EN 55103-2:1998

---------------------- Page: 7 ----------------------

SIST EN 55103-2:1998

---------------------- Page: 8 ----------------------

SIST EN 55103-2:1998

---------------------- Page: 9 ----------------------

SIST EN 55103-2:19
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50147-1:1996(Main)
Anechoic chambers - Part 1: Shield attenuation measurement
SIST EN 50147-1:1997

This standard applies to measurements of shielding attenuation of shielded enclosures (chambers, rooms) in the frequency range 9 kHz - 40 GHz. The object of this standard is to establish a common measurement procedure for validating the shielding effectiveness of a shielded enclosure.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62561-5:2024(Main)
Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals
SIST EN IEC 62561-5:2024

IEC 62561-5:2023 is available as IEC 62561-5:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62561-5:2023 specifies the requirements and tests for earth electrode inspection housings (earth housings) installed in the earth and for earth electrode seals. Lightning protection system components (LPSC) can also be suitable for use in hazardous atmospheres. For this reason, there are additional requirements when installing the components under such conditions. This third edition cancels and replaces the second edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) A classification of earth electrode seals has been added.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60695-2-10:2021/AC:2024-01(Corrigendum)
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
SIST EN IEC 60695-2-10:2022/AC:2024
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62561-4:2023(Main)
Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners
SIST EN IEC 62561-4:2024

IEC 62561-4:2023 is available as IEC 62561-4:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62561-4:2023 deals with the requirements and tests for metallic and non-metallic conductor fasteners that are used to retain and support the air-termination, down-conductor and earth-termination systems. This third edition cancels and replaces the second edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) alignment with the latest edition of ISO IEC 60068-2-52:2017 relating to salt mist atmosphere treatment; b) alignment with the new edition of ISO 22479:2019 relating to humid sulphurous atmosphere treatment; c) new normative annex for the applicability of previous tests.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61936-2:2023(Main)
Power installations exceeding 1 kV AC and 1,5 kV DC - Part 2: DC
SIST EN IEC 61936-2:2023

IEC 61936-2:2023 provides, in a convenient form, requirements for the design and the erection of DC installations in systems with nominal voltages above 1,5 kV DC, so as to provide safety and proper functioning for the use intended. For the purpose of interpreting this document, a DC installation is considered to be one of the following: a) A converter station or DC switching station; b) one (or more) DC generating or storage unit(s), such as solar farms or battery storage units, located on a single site, the DC installation includes DC equipment and cables with all associated power electronics, controlgear, switchgear and all electrical auxiliary systems. Connections between DC generating or storage units located on different sites are excluded; c) DC installation erected on offshore facilities for the purpose of generation, transmission, distribution and/or storage of electricity; or d) DC transition station (between overhead lines and underground cable or between different sections of underground cables). This International Standard does not apply to the design and erection of any of the following: - overhead and underground lines between separate installations; - electric railways; - mining equipment and installations; i- installations on ships according to IEC 60092 series and offshore units according to IEC 61892 series, which are used in the offshore petroleum industry for drilling, processing and storage purposes; - electrostatic equipment (e.g. electrostatic precipitators, spray-painting units); - test sites; - medical equipment, e.g. medical X-ray equipment; - valve hall or converter hall. This document does not apply to the requirements for carrying out live working on electrical installations. This document does not apply to the design of factory-built, type-tested thyristor valves, VSC valves and switchgear for which separate IEC standards exist. This first edition cancels and replaces the IEC TS 61936-2 published in 2015. This edition constitutes a technical revision. See the foreword of this edition for the list of significant technical changes with respect to the previous edition.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63345:2023(Main)
Energy efficiency systems - Simple external consumer display
SIST EN IEC 63345:2023

IEC 63345:2023 specifies a data model to abstract the metering world towards a simple external consumer display. The data model, as described by means of functional blocks contained in this document, lays down the format of metering data accessible by a simple external consumer display. This data interface would be typically part of the meter communication functions and be accessed by a simple external consumer display via the H1 interface of CEN/CLC/ETSI TR 50572 between the display and the meter communication functions.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60364-7-716:2023(Main)
Low-voltage electrical installations - Part 7-716: Requirements for special installations or locations – ELV DC power distribution over information and communications technology (ICT) cable infrastructure
SIST HD 60364-7-716:2024

IEC 60364-7-716:2023 specifies requirements in electrical installations for the distribution of ELV DC power using balanced, information technology cables and accessories primarily designed for data transmission, as specified in terms of a category within the channels of ISO/IEC 11801-1 using power sourcing equipment in accordance with IEC 62368-3. Requirements are included for the design, erection, and verification of telecommunications infrastructure for the purpose of both telecommunications and distribution of ELV DC power. In addition, requirements are included for use of existing telecommunications infrastructure for distribution of ELV DC power. The power delivery systems include, but are not restricted to, the Power over Ethernet systems specified by IEEE 802.3. This document does not apply to the use of cables and accessories within the core and access networks for example private branch exchange (PBX).

  • Standardization document
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-3-4:2023(Main)
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
SIST EN IEC 60068-3-4:2024

IEC 60068-3-4:2023 is available as IEC 60068-3-4:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60068-3-4:2023 provides the necessary information and the basic principles of the effect of humidity in the context of environmental testing to assist in preparing relevant specifications, such as standards for components or equipment. Furthermore, information is provided on operating climatic test chambers. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the requirements for distilled and deionized water have been revised; b) recommendations for the cleaning procedure of test chambers have been included; c) humidification systems (ultrasonic humidifiers and atomizers) have been added; d) the description of water penetration mechanisms has been refined.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-2-3:2016/AC:2023-08(Corrigendum)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
SIST EN 61340-2-3:2016/AC:2023
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61543:2023(Main)
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
SIST EN IEC 61543:2023

This document provides specific emission and immunity requirements, tests and performance criteria for residual current-operated protective devices (RCDs), for household and similar use, for rated voltages not exceeding 440 V. Household and similar use corresponds to the description given in the generic standard IEC 61000-6-1 for residential, commercial, and light-industrial electromagnetic environments. This document is intended to be referred to by RCD product standards and is not intended to be used as a standalone document. Residual current-operated protective devices are: - Residual current operated circuit-breakers without integral overcurrent protection for household and similar use (RCCBs) covered by IEC 61008 series and IEC 62423; - Residual current operated circuit-breakers with integral overcurrent protection for household and similar use (RCBOs) covered by IEC 61009 series and IEC 62423; - Residual current devices with or without overcurrent protection for socket-outlets (SRCDs) covered by IEC 62640; - Portable residual current devices without integral overcurrent protection (PRCDs) covered by IEC 61540; - Devices with an RCD functionality for household and similar use according product standards following the group safety publications for general safety requirements for RCDs, IEC 60755. This edition applies if it is referred to as a dated reference in the relevant product standard. This document is also intended to be used as a guideline in the preparation of EMC requirements and tests for other product standards under the scope of SC 23E. It also specifies generic performance criteria intended to be transformed into specific performance criteria by the relevant product standard. Note: Examples of other product standards under the scope of SC 23E are: - IEC 62020-1 "Electrical accessories - Residual current monitors (RCMs) – Part 1: RCMs for household and similar uses"; - IEC 62606 "General requirements for arc fault detection devices"; - IEC 63024 "Requirements for automatic reclosing devices (ARDs) for circuit breakers, RCBOs-RCCBs for household and similar uses"; - IEC 63052 "Power frequency overvoltage protective devices (POPs) for household and similar applications"; - IEC 62752 "In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)"; - IEC 62955 "Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles".

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day