EN 60809:1996/A4:2009
(Amendment)Lamps for road vehicles - Dimensional, electrical and luminous requirements
Lamps for road vehicles - Dimensional, electrical and luminous requirements
Covers incandescent lamps to be used in headlights, foglights and signalling lights for road vehicles and specifies the technical requirements with methods of test and basic interchangeability (dimensional, electrical and luminous). Applies amongst others to lamps which may be the subject of legislation. In particular covers those lamps contained in regulation no. 37 of Geneva agreement of 20 March 1958 of the United Nations Economic Commission for Europe (ECE) concerning the adaption of uniform conditions of approval and reciprocal recognition of approval of motor vehicle equipment and parts.
Lampen für Straßenfahrzeuge - Maße, elektrische und lichttechnische Anforderungen
Lampes pour véhicules routiers - Prescriptions dimensionnelles, électriques et lumineuses
Sijalke za cestna vozila - Dimenzijske, električne in svetlobne zahteve (IEC 60809:1995/A4:2009)
Zajema sijalke, ki se uporabljajo v žarometih, meglenkah in signalnih lučeh za cestna vozila, in določa tehnične zahteve z metodami preskušanja in osnovne zamenljivosti (dimenzijske, električne in svetlobne). Med drugim se uporablja tudi za sijalke, ki so lahko predmet zakonodaje. Zajema predvsem sijalke iz Uredbe št. 37 Ženevskega sporazuma z dne 20. marca 1958 Ekonomske komisije Združenih narodov za Evropo (ECE) v zvezi s prilagoditvijo enotnih pogojev za odobritev in vzajemno priznavanje odobritve opreme in delov motornih vozil.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2009
6LMDONH]DFHVWQDYR]LOD'LPHQ]LMVNHHOHNWULþQHLQVYHWOREQH]DKWHYH ,(&
$
Lamps for road vehicles - Dimensional, electrical and luminous requirements (IEC
60809:1995/A4:2009)
Lampen für Straßenfahrzeuge - Maße, elektrische und lichttechnische Anforderungen
(IEC 60809:1995/A4:2009)
Lampes pour véhicules routiers - Prescriptions dimensionnelles, électriques et
lumineuses (CEI 60809:1995/A4:2009)
Ta slovenski standard je istoveten z: EN 60809:1996/A4:2009
ICS:
29.140.20 Žarnice z žarilno nitko Incandescent lamps
43.040.20 Naprave za osvetlitev, Lighting, signalling and
signalizacijo in opozarjanje warning devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60809/A4
NORME EUROPÉENNE
June 2009
EUROPÄISCHE NORM
ICS 29.140.20; 43.040.20
English version
Lamps for road vehicles -
Dimensional, electrical and luminous requirements
(IEC 60809:1995/A4:2009)
Lampes pour véhicules routiers - Lampen für Straßenfahrzeuge -
Prescriptions dimensionnelles, Maße, elektrische
électriques et lumineuses und lichttechnische Anforderungen
(CEI 60809:1995/A4:2009) (IEC 60809:1995/A4:2009)
This amendment A4 modifies the European Standard EN 60809:1996; it was approved by CENELEC on
2009-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60809:1996/A4:2009 E
Foreword
The text of document 34A/1314/FDIS, future amendment 4 to IEC 60809:1995, prepared by SC 34A,
Lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as amendment A4 to EN 60809:1996 on 2009-05-01.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2010-02-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2012-05-01
__________
Endorsement notice
The text of amendment 4:2009 to the International Standard IEC 60809:1995 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
IEC 60809
Edition 2.0 2009-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 4
AMENDEMENT 4
The sheets contained in this amendment are to be inserted in IEC 60809
Les feuilles de cet amendement sont à insérer dans la CEI 60809
Lamps for road vehicles – Dimensional, electrical and luminous requirements
Lampes pour véhicules routiers – Prescriptions dimensionnelles, électriques et
lumineuses
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX S
ICS 29.140.20; 43.040.20 ISBN 2-8318-1032-5
60809 Amend.4 © IEC:2009 60809 Amend.4 © CEI:2009
AVANT-PROPOS
Le présent amendement a été établi par le sous-comité 34A: Lampes, du comité d'études 34
de la CEI: Lampes et équipements associés.
Le texte de cet amendement est issu des documents suivants:
FDIS Rapport de vote
34A/1314/FDIS 34A/1321/RVD
Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant
abouti à l'approbation de cet amendement.
Le comité a décidé que le contenu de cet amendement et de la publication de base ne sera
pas modifié avant la date du résultat de la maintenance indiquée sur le site web de la CEI
"http://webstore.iec.ch" dans les données spécifiques à cette publication A cette date, la
publication sera
• reconduite,
• supprimée,
• remplacée par une édition révisée, ou
• amendée.
_____________
FOREWORD
This amendment has been prepared by subcommittee 34A: Lamps, of IEC technical
committee 34: Lamps and related equipment.
The text of this amendment is based on the following documents:
FDIS Report on voting
34A/1314/FDIS 34A/1321/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
60809 Amend.4 © IEC:2009 60809 Amend.4 © CEI:2009
INSTRUCTIONS POUR L’INSERTION DES INSTRUCTIONS FOR THE
NOUVELLES PAGES ET FEUILLES INSERTION OF NEW PAGES
DE CARACTÉRISTIQUES DANS LA AND DATA SHEETS
PUBLICATION 60809 IN PUBLICATION 60809
----------------------- -----------------------
1. Retirer les pages 1. Remove the existing pages
2 - 18, 24, 28, 30, G-1 et J-1 3 - 19, 25, 29, 31, G-2 and J-2
existantes, insérer les nouvelles pages insert the new pages
2 - 18, 24, 28, 30, 32, G-1et J-1. 3 - 19, 25, 29, 31, 33, G-2 and J-2
2. Remplacer les feuilles de caractéristiques : 2. Replace the lamp data sheets :
60809-IEC-7110-1 par 60809-IEC-7110-1 with
60809-IEC-7110-2 (6 pages) 60809-IEC-7110-2 (6 pages)
60809-IEC-7120-1 par 60809-IEC-7120-1 with
60809-IEC-7120-2 (8 pages) 60809-IEC-7120-2 (8 pages)
3. Insérer les nouvelles feuilles de 3. Insert the new lamp data sheets:
caractéristiques :
60809-IEC-2132-1 (4 pages) 60809-IEC-2132-1 (4 pages)
60809-IEC-3135-1 (2 pages) 60809-IEC-3135-1 (2 pages)
60809-IEC-4335-1 (2 pages) 60809-IEC-4335-1 (2 pages)
----------------------- -----------------------
60809 Amend. 4 © IEC:2009 – 3 –
CONTENTS
FOREWORD.5
1 General.7
1.1 Scope.7
1.2 Normative references.9
1.3 Definitions.9
1.4 Numbering system for lamp data sheets .13
2 Requirements and test conditions for filament lamps .13
2.1 General requirements.13
2.2 Lamp marking .13
2.3 Bulbs.15
2.4 Colour.15
2.5 Lamp dimensions.15a
2.6 Caps and bases .17
2.7 Initial electrical and luminous requirements .17
2.8 Check on optical quality .17
2.9 UV radiation.19
2.10 Standard (étalon) filament lamps .19
3 Requirements and test conditions for discharge lamps .19
3.1 General requirements.19
3.2 Lamp marking .19
3.3 Bulbs.21
3.4 Caps.21
3.5 Position and dimensions of electrodes, arc and black stripes .21
3.6 Starting, run-up and hot-restrike characteristics .23
3.7 Electrical and photometric characteristics.23
3.8 Colour.23
3.9 UV radiation.25
3.10 Standard (étalon) discharge lamps .27
4 Sampling and conditions of compliance .27
5 Lamp data sheets.29
5.1 List of specific lamp types .29
Annex A (normative) Filament shape, length and position . A-2
Annex B (normative) Measurement method of the colour of filament lamps . B-2
Annex C (normative) Test conditions for electrical and luminous characteristics. C-2
Annex D (normative) Method of measuring internal elements of R2 lamps. D-2
Annex E (normative) Method of measuring internal elements of H4 and HS1
lampsE-2
Annex F (normative) Method of measuring internal elements of HB1 lamps . F-2
Annex G (informative) Optical set-up for the measurement of the position and form
of the arc and of the position of the electrodes of discharge lamps.G-2
Annex H (normative) Measurement method of electrical and photometric
characteristics of discharge lamps . H-2
Annex J (informative) Overview of lamp types and their applications .J-2
Annex K (normative) Test conditions for colour endurance measurements…. K-2
60809 Amend. 4 © IEC:2009 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LAMPS FOR ROAD VEHICLES –
DIMENSIONAL, ELECTRICAL AND LUMINOUS REQUIREMENTS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be render
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.