EN 60862-1:2003
(Main)Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification
Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification
Relates to surface acoustic wave (SAW) filters for use in telecommunications, measuring equipment, radar systems and consumer products. Gives general information and general methods concerning measurements and tests common to many types of SAW filters.
Oberflächenwellenfilter (OFW-Filter) mit bewerteter Qualität - Teil 1: Fachgrundspezifikation
Filtres à ondes acoustiques de surface (OAS) sous assurance de la qualité - Partie 1: Spécification générique
S'applique aux filtres à ondes acoustiques de surface (OAS) destinés à l'utilisation dans les télécommunications, dans l'appareillage de mesure, les systèmes radar et les produits de consommation. Donne des informations et méthodes générales concernant les mesures et les essais communs à de nombreux modèles de filtres à OAS.
Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification (IEC 60862-1:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60862-1:2004
STANDARD
julij 2004
Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic
specification (IEC 60862-1:2003)
ICS 31.160 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 60862-1
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2003
ICS 31.140 Supersedes EN 166000:1995
English version
Surface acoustic wave (SAW) filters of assessed quality
Part 1: Generic specification
(IEC 60862-1:2003)
Filtres à ondes acoustiques Oberflächenwellenfilter (OFW-Filter)
de surface (OAS) mit bewerteter Qualität
sous assurance de la qualité Teil 1: Fachgrundspezifikation
Partie 1: Spécification générique (IEC 60862-1:2003)
(CEI 60862-1:2003)
This European Standard was approved by CENELEC on 2003-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60862-1:2003 E
Foreword
The text of document 49/587/FDIS, future edition 2 of IEC 60862-1, prepared by IEC TC 49,
Piezoelectric and dielectric devices for frequency control and selection, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 60862-1 on 2003-07-01.
This European Standard supersedes EN 166000:1995.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-07-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60862-1:2003 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-2-10 NOTE Harmonized as HD 323.2.10 S3:1988 (not modified).
IEC 60862-2 NOTE Harmonized as EN 60862-2:2002 (not modified).
__________
- 3 - EN 60862-1:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60027 series Letter symbols to be used in electrical HD 245 series
technology HD 60027 series
IEC 60050-561 1991 International Electrotechnical - -
Vocabulary (IEV)
Chapter 561: Piezoelectric devices for
frequency control and selection
1)
IEC 60068-1 1988 Environmental testing EN 60068-1 1994
Part 1: General and guidance
IEC 60068-2-1 1990 Part 2: Tests - Tests A: Cold EN 60068-2-1 1993
2)
IEC 60068-2-2 1974 Part 2: Tests - Test B: Dry heat EN 60068-2-2 1993
IEC 60068-2-6 1995 Part 2: Tests - Test Fc: Vibration EN 60068-2-6 1995
+ corr. March 1995 (sinusoidal)
3)
IEC 60068-2-7 1983 Part 2: Tests - Test Ga and guidance: EN 60068-2-7 1993
Acceleration, steady state
IEC 60068-2-13 1983 Part 2: Tests - Test M: Low air pressure EN 60068-2-13 1999
4)
IEC 60068-2-14 1984 Part 2: Tests - Test N: Change of EN 60068-2-14 1999
temperature
IEC 60068-2-17 1994 Part 2: Tests - Test Q: Sealing EN 60068-2-17 1994
5)
IEC 60068-2-20 1979 Part 2: Tests - Test T: Soldering HD 323.2.20 S3 1988
1)
EN 60068-1 includes corrigendum October 1988 + A1:1992.
2)
EN 60068-2-2 includes supplement A:1996 to IEC 60068-2-2.
3)
EN 60068-2-7 includes A1:1986 to IEC 60068-2-7.
4)
EN 60068-2-14 includes A1:1986 to IEC 60068-2-14.
5)
HD 323.2.20 S3 includes A2:1987 to IEC 60068-2-20.
Publication Year Title EN/HD Year
IEC 60068-2-21 1999 Part 2-21: Tests - Test U: Robustness of EN 60068-2-21 1999
terminations and integral mounting
devices
IEC 60068-2-27 1987 Part 2: Tests - Test Ea and guidance: EN 60068-2-27 1993
Shock
IEC 60068-2-29 1987 Part 2: Tests - Test Eb and guidance: EN 60068-2-29 1993
+ Corr. Bump
6)
IEC 60068-2-30 1980 Part 2: Tests - Test Db and guidance: EN 60068-2-30 1999
Damp heat, cyclic (12 + 12 hour cycle)
7)
IEC 60068-2-32 1975 Part 2: Tests - Test Ed: Free fall EN 60068-2-32 1993
(Procedure 1)
IEC 60068-2-45 1980 Part 2: Tests - Test Xa and guidance: EN 60068-2-45 1992
Immersion in cleaning solvents
IEC 60068-2-52 1996 Part 2: Tests - Test Kb: Salt mist, cyclic EN 60068-2-52 1996
(sodium chloride solution)
IEC 60068-2-58 1999 Part 2-58: Tests - Test Td: Test EN 60068-2-58 1999
methods for solderability, resistance to
dissolution of metallization and to
soldering heat of surface mounting
devices (SMD)
IEC 60068-2-64 1993 Part 2: Test methods - Test Fh: EN 60068-2-64 1994
+ corr. October 1993 Vibration, broad-band random (digital
control) and guidance
IEC 60068-2-78 2001 Part 2-78: Tests - Test Cab: Damp heat, EN 60068-2-78 2001
steady state
IEC 60122-1 2002 Quartz crystal units of assessed quality EN 60122-1 2002
Part 1: Generic specification
database
IEC 60617 Graphical symbols for diagrams - -
IEC 60642 1979 Piezoelectric ceramic resonators and - -
resonator units for frequency control
and selection –
Chapter I: Standard values and
conditions - Chapter II: Measuring and
test conditions
IEC 60695-2-2 1991 Fire hazard testing EN 60695-2-2 1994
Part 2: Test methods –
Section 2: Needle-flame test
6)
EN 60068-2-30 includes A1:1985 to IEC 60068-2-30.
7)
EN 60068-2-32 includes A2:1990 to IEC 60068-2-32.
- 5 - EN 60862-1:2003
Publication Year Title EN/HD Year
IEC 61000-4-2 1995 Electromagnetic compatibility (EMC) EN 61000-4-2 1995
Part 4-2: Testing and measurement
techniques - Electrostatic discharge
immunity test
A1 1998 A1 1998
A2 2000 A2 2001
IEC QC 001001 2000 IEC Quality Assessment System for - -
Electronic Components (IECQ)- Basic
rules
IEC QC 001002-2
1998 IEC Quality Assessment System for - -
Electronic Components (IECQ) - Rules
of Procedure
Part 2: Documentation
IEC QC 001002-3
1998 Part 3: Approval procedures - -
IEC QC 001005 2000 Register of firms, products and services - -
approved under the IECQ system,
including ISO 9000
ISO 1000 1992 SI units and recommendations for the - -
use of their multiples and of certain
other units
NORME CEI
INTERNATIONALE IEC
60862-1
INTERNATIONAL
QC 166000
STANDARD
Deuxième édition
Second edition
2003-05
Filtres à ondes acoustiques de surface (OAS)
sous assurance de la qualité –
Partie 1:
Spécification générique
Surface acoustic wave (SAW) filters
of assessed quality –
Part 1:
Generic specification
© IEC 2003 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
W
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue
60862-1 © IEC:2003 – 3 –
CONTENTS
FOREWORD . 5
1 General . 9
1.1 Scope . 9
1.2 Normative references . 9
1.3 Order of precedence of documents .13
2 Terms, definitions, units and symbols .13
2.1 General .13
2.2 Definitions .13
2.3 Preferred values for ratings and characteristics .31
3 Marking .35
3.1 Filter marking .35
3.2 Package marking .35
4 Quality assessment procedures .37
4.1 Primary stage of manufacture .37
4.2 Structurally similar components .37
4.3 Subcontracting .37
4.4 Incorporated components .37
4.5 Manufacturer’s approval .37
4.6 Approval procedures.37
4.7 Procedures for capability approval.39
4.8 Procedures for qualification approval.41
4.9 Test procedures.41
4.10 Screening requirements.41
4.11 Rework and repair work .41
4.12 Certified records of released lots .41
4.13 Validity of release .43
4.14 Release for delivery.43
4.15 Unchecked parameters .43
5 Test and measurement procedures .43
5.1 General .43
5.2 Test and measurement conditions .43
5.3 Visual inspection .45
5.4 Dimensions and gauging procedures .45
5.5 Electrical test procedures .47
5.6 Mechanical and environmental test procedures.65
5.7 Endurance test procedure.75
Bibliography.77
Figure 1 – Frequency response of a SAW filter .29
Figure 2 – Insertion attenuation, phase, and group delay measurement .49
Figure 3 – Return attenuation measurement.55
Figure 4 – Unwanted signal measurement.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.