EN 62013-2:2006

Caplights for use in mines susceptible to firedamp - Part 2: Performance and other safety-related matters

This part of EN 62013 details those performance and other safety features of caplights, including those with a point of connection for another apparatus, not covered in EN 62013-1, but which are important for the safety and working conditions of the user. It may also be applied to caplights for use in mines not likely to be endangered by firedamp.

Kopfleuchten für die Verwendung in schlagwettergefährdeten Grubenbauen - Teil 2: Gebrauchstauglichkeit und Sicherheit

Lampes-chapeaux utilisables dans les mines grisouteuses - Partie 2: Performance et autres sujets relatifs à la sécurité

Cette partie de la EN 62013 détaille l'aptitude à la fonction et autres caractéristiques de sécurité des lampes-chapeaux, y compris celles ayant un point de connexion pour d'autres matériels, non couverts par la EN 62013-1, mais qui sont importantes pour la sécurité et les conditions de travail de l'utilisateur. Elle peut aussi s'appliquer aux lampes-chapeaux utilisées dans les mines non grisouteuses.

Rudarske naglavne svetilke za uporabo v rudnikih, kjer se lahko pojavi jamski eksplozivni plin - 2. del: Lastnosti in druge z varnostjo povezane teme (IEC 62013-2:2005)

General Information

• Status: Withdrawn
• Publication Date: 26-Jul-2006
• Withdrawal Date: 31-Jan-2009
• ICS: 29.260.20 - Electrical apparatus for explosive atmospheres
• Technical Committee: CLC/TC 31 - Electrical apparatus for explosive atmospheres - General requirements
• Drafting Committee: CLC/SC 31-4 - Increased safety “e”
• Parallel Committee: IEC/TC 31 - Electrical apparatus for potentially explosive atmospheres
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 11-Jan-2015
• Completion Date: 11-Jan-2015
• Ref Project: SIST EN 62013-2:2006 - Caplights for use in mines susceptible to firedamp -- Part 2: Performance and other safety-related matters

Relations

• Replaces: EN 62013-2:2000 - Caplights for use in mines susceptible to firedamp - Part 2: Performance and other safety-related matters
• Effective Date: 29-Jan-2023
• Replaced By: EN 60079-35-2:2012 - Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62013-2:2006
01-december-2006
1DGRPHãþD
SIST EN 62013-2:2001
Rudarske naglavne svetilke za uporabo v rudnikih, kjer se lahko pojavi jamski
eksplozivni plin - 2. del: Lastnosti in druge z varnostjo povezane teme (IEC 62013-
2:2005)
Caplights for use in mines susceptible to firedamp - Part 2: Performance and other safety
-related matters
Kopfleuchten für die Verwendung in schlagwettergefährdeten Grubenbauen - Teil 2:
Gebrauchstauglichkeit und Sicherheit
Lampes-chapeaux utilisables dans les mines grisouteuses - Partie 2: Performance et
autres sujets relatifs à la sécurité
Ta slovenski standard je istoveten z: EN 62013-2:2006
ICS:
29.260.20 (OHNWULþQLDSDUDWL]D Electrical apparatus for
HNVSOR]LYQDR]UDþMD explosive atmospheres
73.100.20 3UH]UDþHYDOQD Ventilation, air-conditioning
NOLPDWL]DFLMVNDLQ and illumination equipment
UD]VYHWOMHYDOQDRSUHPD
SIST EN 62013-2:2006 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 62013-2

NORME EUROPÉENNE
July 2006
EUROPÄISCHE NORM

ICS 29.260.20 Supersedes EN 62013-2:2000


English version


Caplights for use in mines susceptible to firedamp
Part 2: Performance and other safety-related matters
(IEC 62013-2:2005)


Lampes-chapeaux utilisables  Kopfleuchten für die Verwendung
dans les mines grisouteuses in schlagwettergefährdeten Grubenbauen
Partie 2: Performance et autres sujets Teil 2: Gebrauchstauglichkeit
relatifs à la sécurité und Sicherheit
(CEI 62013-2:2005) (IEC 62013-2:2005)




This European Standard was approved by CENELEC on 2006-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62013-2:2006 E

---------------------- Page: 2 ----------------------

EN 62013-2:2006 - 2 -
Foreword
The text of document 31/586A/FDIS, future edition 2 of IEC 62013-2, prepared by IEC TC 31, Equipment
for explosive atmospheres, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 62013-2 on 2006-02-01.
This European Standard supersedes EN 62013-2:2000.
The general revision and updating of EN 62013-2:2000 is a result of feedback from the manufacturers
and the certifiers following the use of the standard. Its purpose is clarification and the elimination of any
ambiguities. Account has also been taken of changes in related standards.
Apart from the general revision and updating, the main technical differences from EN 62013-2:2000 are
Clause 5 to accommodate new LED technology and reflector / lens design and to allow calculation as an
alternative to testing, and, as a result, simplification of the illumination type test in Clause 8.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62013-2:2005 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 62013-2:2006

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated refer
...