EN 61188-7:2009

Printed boards and printed board assemblies - Design and use - Part 7: Electronic component zero orientation for CAD library construction

IEC 61188-7:2009 establishes a consistent technique for the description of electronic component orientation, and their land pattern geometries. This facilitates and encourages a common data capture and transfer methodology amongst and between global trading partners.

Leiterplatten und Flachbaugruppen – Konstruktion und Anwendung – Teil 7: Nullorientierung elektronischer Bauelemente für CAD-Bibliotheksaufbau

Cartes imprimées et cartes imprimées équipées - Conception et utilisation - Partie 7: Orientation nulle des composants électroniques pour l'élaboration de la bibliothèque CAO

La CEI 61188-7:2009 établit une technique cohérente pour décrire l'orientation des composants électroniques, ainsi que les géométries de leurs zones de report. Cela facilite et encourage une méthodologie commune de saisie et de transfert des données parmi et entre les partenaires commerciaux mondiaux.

Plošče tiskanih vezij in sestavi plošč tiskanih vezij - Oblika in uporaba - 7. del: Posamezne zahteve - Ničelna orientacija elektronske komponente za izdelavo knjižnice CAD (IEC 61188-7:2009)

Ta del IEC 61188 vzpostavlja dosledno tehniko za opis orientacije elektronskih komponent ter njihove geometrije vzorca zemljišča. To pospešuje in spodbuja skupno zajemanje podatkov in metodologijo prenosa med globalnimi trgovinskimi partnerji.

General Information

• Status: Withdrawn
• Publication Date: 08-Jul-2009
• Withdrawal Date: 31-May-2012
• ICS: 31.180 - Printed circuits and boards
• Technical Committee: CLC/SR 91 - Electronics assembly technology
• Drafting Committee: IEC/TC 91 - IEC_TC_91
• Parallel Committee: IEC/TC 91 - IEC_TC_91
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-May-2020
• Completion Date: 15-May-2020
• Ref Project: SIST EN 61188-7:2010 - Printed board and printed board assemblies - Design and use -- Part 7: Sectional requirements - Electronic component zero orientation for CAD library construction

Relations

• Replaced By: EN 61188-7:2017 - Printed boards and printed board assemblies - Design and use - Part 7: Electronic component zero orientation for CAD library construction
• Effective Date: 26-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Leiterplatten und Flachbaugruppen – Konstruktion und Anwendung – Teil 7: Nullorientierung elektronischer Bauelemente für CAD-BibliotheksaufbauCartes imprimées et cartes imprimées équipées - Conception et utilisation - Partie 7: Orientation nulle des composants électroniques pour l'élaboration de la bibliothèque CAOPrinted board and printed board assemblies - Design and use -- Part 7: Sectional requirements - Electronic component zero orientation for CAD library construction31.180SORãþHPrinted circuits and boardsICS:Ta slovenski standard je istoveten z:EN 61188-7:2009SIST EN 61188-7:2010en,fr01-januar-2010SIST EN 61188-7:2010SLOVENSKI
STANDARD



SIST EN 61188-7:2010



EUROPEAN STANDARD EN 61188-7 NORME EUROPÉENNE
EUROPÄISCHE NORM July 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61188-7:2009 E
ICS 31.180
English version
Printed boards and printed board assemblies -
Design and use -
Part 7: Electronic component zero orientation
for CAD library construction (IEC 61188-7:2009)
Cartes imprimées
et cartes imprimées équipées -
Conception et utilisation -
Partie 7: Orientation nulle des composants électroniques pour l'élaboration
de la bibliothèque CAO (CEI 61188-7:2009)
Leiterplatten und Flachbaugruppen - Konstruktion und Anwendung -
Teil 7: Nullorientierung elektronischer Bauelemente für CAD-Bibliotheksaufbau
(IEC 61188-7:2009)
This European Standard was approved by CENELEC on 2009-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 61188-7:2010



EN 61188-7:2009
- 2 -
Foreword The text of document 91/854/FDIS, future edition 1 of IEC 61188-7, prepared by IEC TC 91, Electronics assembly technology, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61188-7 on 2009-06-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2010-03-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2012-06-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61188-7:2009 was approved by CENELEC as a European Standard without any modification. __________
SIST EN 61188-7:2010



- 3 - EN 61188-7:2009 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 61182-2 -1) Printed board assembly products - Manufacturing description data and transfer methodology -
Part 2: Generic requirements
- -
IEC 61188-5-1 -1) Printed boards and printed board assemblies -Design and use -
Part 5-1: Attachment (land/joint) considerations - Generic requirements EN 61188-5-1 20022)
IEC 61188-5-2 -1) Printed boards and printed board assemblies -Design and use -
Part 5-2: Attachment (land/joint) considerations - Discrete components EN 61188-5-2 20032)
IEC 61188-5-3 -1) Printed boards and printed board assemblies -Design and use -
Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides EN 61188-5-3 20072)
IEC 61188-5-4 -1) Printed boards and printed board assemblies -Design and use -
Part 5-4: Attachment (land/joint
...