Fixed capacitors for use in electronic equipment - Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors

applies to fixed capacitors for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment. These capacitors may have 'self-healing properties' depending on conditions of use. They are primarily intended for applications where the a.c. component is small with respect to the rated voltage. Two performance grades of capacitors are covered, Grade 1 for long-life application and Grade 2 for general application.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 2: Rahmenspezifikation: Festkondensatoren mit metallisierter Kunststofffolie aus Polyethylen-Terephthalat für Gleichspannung

Condensateurs fixes utilisés dans les équipements électroniques - Partie 2: Spécification intermédiaire: Condensateurs fixes pour courant continu à diélectrique en film de polytéréphtalate d'éthylène métallisé

Nespremenljivi kondenzatorji za uporabo v elektronski opremi – 2. del: Področna specifikacija: nespremenljivi kondenzatorji z dielektrikom iz metalizirane polipropilen-tereftalatne folije za enosmerne napetosti (IEC 60384-2:2005)

General Information

Status
Withdrawn
Publication Date
08-Dec-2005
Withdrawal Date
31-Oct-2008
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
13-Jan-2015
Completion Date
13-Jan-2015

Relations

Buy Standard

Standard
EN 60384-2:2006
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI SIST EN 60384-2:2006

STANDARD
februar 2006
Nespremenljivi kondenzatorji za uporabo v elektronski opremi – 2. del:
Področna specifikacija: nespremenljivi kondenzatorji z dielektrikom iz
metalizirane polipropilen-tereftalatne folije za enosmerne napetosti (IEC
60384-2:2005)
Fixed capacitors for use in electronic equipment – Part 2: Sectional specification:
Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors (IEC
60384-2:2005)
ICS 31.060.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60384-2
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2005

ICS 31.060.30 Supersedes CECC 30 400:1984

English version
Fixed capacitors for use in electronic equipment
Part 2: Sectional specification:
Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors
(IEC 60384-2:2005)
Condensateurs fixes utilisés  Festkondensatoren zur Verwendung in
dans les équipements électroniques Geräten der Elektronik
Partie 2: Spécification intermédiaire: Teil 2: Rahmenspezifikation:
Condensateurs fixes pour courant continu Festkondensatoren mit metallisierter
à diélectrique en film de polytéréphtalate Kunststofffolie aus Polyethylen-
d'éthylène métallisé Terephthalat für Gleichspannung
(CEI 60384-2:2005) (IEC 60384-2:2005)

This European Standard was approved by CENELEC on 2005-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60384-2:2005 E
Foreword
The text of document 40/1593/FDIS, future edition 3 of IEC 60384-2, prepared by IEC TC 40,
Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60384-2 on 2005-11-01.
This European Standard supersedes CECC 30 400:1994.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60384-2:2005 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60384-14 NOTE Harmonized as EN 60384-14:2005 (not modified).
__________
- 3 - EN 60384-2:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60063 1963 Preferred number series for resistors and - -
capacitors
A1 1967 - -
A2 1977 - -
1) 2)
IEC 60068-1 - Environmental testing EN 60068-1 1994
Part 1: General and guidance
1) 2)
IEC 60384-1 - Fixed capacitors for use in electronic EN 60384-1 2001
(mod) equipment + corr. October 2001
Part 1: Generic specification
1) 2)
IEC 60384-2-1 - Part 2-1: Blank detail specification - Fixed EN 60384-2-1 2005
metallized polyethylene-terephthalate film
dielectric d.c. capacitors - Assessment
levels E and EZ
1)
IEC 60410 - Sampling plans and procedures for - -
inspection by attributes
1)
ISO 3 - Preferred numbers - Series of preferred - -
numbers
1)
Undated reference.
2)
Valid edition at date of issue.

INTERNATIONAL IEC
STANDARD 60384-2
QC 300400
Third edition
2005-11
Fixed capacitors for use in electronic equipment –
Part 2:
Sectional specification:
Fixed metallized polyethylene-terephthalate film
dielectric d.c. capacitors
 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale U
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 60384-2  IEC:2005(E)
CONTENTS
FOREWORD.3
1 General .6
1.1 Scope.6
1.2 Object .6
1.3 Normative references .6
1.4 Information to be given in a detail specification .7
1.5 Terms and definitions .8
1.6 Marking .8
2 Preferred ratings and characteristics .9
2.1 Preferred characteristics .9
2.2 Preferred values of ratings .9
3 Quality assessment procedures.10
3.1 Primary stage of manufacture.10
3.2 Structurally similar components.10
3.3 Certified records of released lots.10
3.4 Qualification approval.10
3.5 Quality conformance inspection.17
4 Test and measurement procedures.18
4.1 Visual examination and check of dimensions.18
4.2 Electrical tests.18
4.3 Robustness of terminations .21
4.4 Resistance to soldering heat .21
4.5 Solderability .22
4.6 Rapid change of the temperature .22
4.7 Vibration.22
4.8 Bump .22
4.9 Shock.23
4.10 Climatic sequence .23
4.11 Damp heat, steady state.24
4.12 Endurance.24
4.13 Charge and discharge .25
4.14 Component solvent resistance.26
4.15 Solvent resistance of the marking.26

Table 1 – Sampling plan together with numbers of permissible defectives for
qualification approval test .12
Table 2 – Test schedule for qualification approval.13
Table 3 – Lot-by-lot inspection .18
Table 4 – Periodic inspection .18
Table 5 – Test points and voltages .19
Table 6 – Tangent of loss angle requirements.20
Table 7 – Insulation resistance requirements .20
Table 8 – Correction factors.21
Table 9 – Preferred severities .23
Table 10 – Test conditions.25
Table 11 – Lead spacing.26

60384-2  IEC:2005(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 2: Sectional specification: Fixed metallized polyethylene-
terephthalate film dielectric d.c. capacitors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.