EN IEC 62976:2019

Industrial non-destructive testing equipment - Electron linear accelerator

This document gives the rules of naming, technical requirements, test methods, inspection, marking, packaging, transportation, storage and accompanying documents for electron linear accelerator equipment for Non-Destructive Testing (NDT). This document applies to NDT electron linear accelerator equipment in the X-ray energy range of 1 MeV to 15 MeV, including the accelerator equipment for radiographic film,computed radiography with imaging plates, real-time imaging, digital detector array and industrial computerized tomography.

Industrielle Ausrüstung für die zerstörungsfreie Prüfung - Elektronenlinearbeschleuniger

Appareils destinés aux essais non destructifs pour le secteur industriel - Accélérateur électronique linéaire

This document gives the rules of naming, technical requirements, test methods, inspection, marking, packaging, transportation, storage and accompanying documents for electron linear accelerator equipment for Non-Destructive Testing (NDT). This document applies to NDT electron linear accelerator equipment in the X-ray energy range of 1 MeV to 15 MeV, including the accelerator equipment for radiographic film,computed radiography with imaging plates, real-time imaging, digital detector array and industrial computerized tomography.

Oprema za industrijsko neporušitveno preskušanje - Elektronski linearni pospeševalnik (IEC 62976:2017)

Ta dokument vsebuje pravila o poimenovanju, tehnične zahteve, preskusne metode, podatke o pregledu, označevanju, pakiranju, prevozu in skladiščenju ter spremne dokumente za elektronski linearni pospeševalnik, ki se uporablja za neporušitveno preskušanje (NDT).
Dokument se uporablja za elektronski linearni pospeševalnik za neporušitveno preskušanje v energijskem območju od 1 MeV do 15 MeV, vključno s pospeševalno opremo za radiografski film, računalniško radiografijo s slikovnimi ploščami, sprotno slikanje, digitalnimi detektorskimi nizi in industrijsko računalniško tomografijo.

General Information

• Status: Published
• Publication Date: 13-Jun-2019
• Withdrawal Date: 21-May-2022
• ICS: 27.120.01 - Nuclear energy in general
• Technical Committee: CLC/TC 45B - Radiation protection instrumentation
• Drafting Committee: CLC/TC 45B - Radiation protection instrumentation
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 14-Jun-2019
• Due Date: 30-Mar-2021
• Completion Date: 14-Jun-2019
• Ref Project: SIST EN IEC 62976:2019 - Industrial non-destructive testing equipment - Electron linear accelerator (IEC 62976:2017)

Relations

• Amended By: EN IEC 62976:2019/A1:2022 - Industrial non-destructive testing equipment - Electron linear accelerator
• Effective Date: 26-Apr-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62976:2019
01-september-2019
Oprema za industrijsko neporušitveno preskušanje - Elektronski linearni
pospeševalnik (IEC 62976:2017)
Industrial non-destructive testing equipment - Electron linear accelerator (IEC
62976:2017)
Industrielle Ausrüstung für die zerstörungsfreie Prüfung - Elektronenlinearbeschleuniger
(IEC 62976:2017)
Appareils destinés aux essais non destructifs pour le secteur industriel - Accélérateur
électronique linéaire (IEC 62976:2017)
Ta slovenski standard je istoveten z: EN IEC 62976:2019
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
27.120.01 Jedrska energija na splošno Nuclear energy in general
SIST EN IEC 62976:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 62976:2019

---------------------- Page: 2 ----------------------

SIST EN IEC 62976:2019


EUROPEAN STANDARD EN IEC 62976

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2019
ICS 27.120.01

English Version
Industrial non-destructive testing equipment - Electron linear
accelerator
(IEC 62976:2017)
Appareils destinés aux essais non destructifs pour le Industrielle Ausrüstung für die zerstörungsfreie Prüfung -
secteur industriel - Accélérateur électronique linéaire Elektronenlinearbeschleuniger
(IEC 62976:2017) (IEC 62976:2017)
This European Standard was approved by CENELEC on 2019-05-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62976:2019 E

---------------------- Page: 3 ----------------------

SIST EN IEC 62976:2019
EN IEC 62976:2019 (E)
European foreword
This document (EN IEC 62976:2019) consists of the text of IEC 62976:2017 prepared by IEC/TC 45
"Nuclear instrumentation".
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-05-22
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-05-22
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62976:2017 was approved by CENELEC as a European
Standard without any modification.


2

---------------------- Page: 4 ----------------------

SIST EN IEC 62976:2019
EN IEC 62976:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
ISO 780 2015 Packaging – Distribution packaging – EN ISO 780 2015
Graphical symbols for handling and
storage of packages
ISO 19232-1 2013 Non-destructive testing – Image quality of EN ISO 19232-1 2013
radiographs – Part 1: Determ
...