This document complements the existing requirements of ISO/IEC 17021-1 for bodies providing audit and certification of quality management systems against ISO 19443.
NOTE   This document is recommended for use as a criteria document for accreditation, peer assessment or other audit processes.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 63148:2021 specifies the requirements of tracking systems for radioactive materials. Such systems identify and locate the position of the radioactive materials transported using global navigation satellite systems (GNSS) and radio frequency identification (RFID).
The system provides a set of safety controls of the radioactive material, by which the transporter can improve safety during transportation. This document may also be used as supplementary guidance to the regulatory body.

  • Standard
    32 pages
    English and French language
    sale 15% off

This document specifies the format of binary list-mode data at the output of digital data acquisition devices used for the detection and measurement of radiation. Such data acquisition devices may employ digital signal processors (DSP) and field-programmable gate arrays (FPGA) in combination with memory and a communication interface with a computer.

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62372:2021 is applicable to housed scintillators for registration and spectrometry of alpha-, beta-, gamma-, X-ray and neutron radiation. This document specifies the requirements for the testing equipment and test methods of the basic parameters, of housed scintillators, such as:
- the direct method is applicable to measure the light output of housed scintillators based on scintillation material. The housed scintillators certified by this method can be used as working standard of housed scintillators (hereinafter: working standard) when performing measurements by a relative method of comparison.
- the relative method of comparison with the working standard is applicable to housed scintillators based on the same scintillation material as the working standard.
This second edition cancels and replaces the first edition published in 2006. This edition includes the following significant technical changes with respect to the previous edition:
- Title has been modified.
- To review the existing requirements and to update the terminology, definitions and normative references.

  • Standard
    19 pages
    English language
    sale 15% off

IEC 63048:2020 defines the general requirements for Mobile Remotely Controlled Systems (MRCSs) for nuclear and radiological applications such as integrity inspections, repair of components, handling of radioactive materials, and monitoring of physical conditions and radiation dose intensity in specific areas.
This document applies to MRCSs that are used to support nuclear and radiological facilities. These general requirements encompass high-level performance requirements regarding sensors, monitoring devices, control devices, interfacing mechanisms, simulation methods, and verification methods thereof in a normal environment or extreme environmental conditions, such as high radiation, high temperature, and high humidity environments.

  • Standard
    51 pages
    English and French language
    sale 15% off

This document provides guidance on the implementation of the ISO 19443 requirements, with examples of possible steps an organization can take to meet the requirements. It does not add to, subtract from, or in any way modify those requirements. This document does not prescribe mandatory approaches to implementation, or provide any preferred method of interpretation.

  • Technical report
    55 pages
    English language
    sale 15% off
  • Draft
    55 pages
    English language
    sale 15% off

This document contains the terms, definitions, notes to entry and examples corresponding to the basic concepts of the nuclear energy, nuclear technologies, and radiological protection subject fields. It provides the minimum essential information for each cross-cutting concept represented by a single term. NOTE A full understanding of concepts goes with a background knowledge of nuclear energy, nuclear technologies, and radiological protection. It is intended to facilitate communication and promote common understanding.

  • Standard
    19 pages
    English language
    sale 15% off

This document complements the existing requirements of ISO/IEC 17021-1 for bodies providing audit and certification of quality management systems against ISO 19443. NOTE This document is recommended for use as a criteria document for accreditation, peer assessment or other audit processes.

  • Technical specification
    16 pages
    English language
    sale 15% off
  • Technical specification
    16 pages
    French language
    sale 15% off

This document gives the rules of naming, technical requirements, test methods, inspection, marking, packaging, transportation, storage and accompanying documents for electron linear accelerator equipment for Non-Destructive Testing (NDT).
This document applies to NDT electron linear accelerator equipment in the X-ray energy range of 1 MeV to 15 MeV, including the accelerator equipment for radiographic film,computed radiography with imaging plates, real-time imaging, digital detector array and industrial computerized tomography.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document gives the rules of naming, technical requirements, test methods, inspection, marking, packaging, transportation, storage and accompanying documents for electron linear accelerator equipment for Non-Destructive Testing (NDT). This document applies to NDT electron linear accelerator equipment in the X-ray energy range of 1 MeV to 15 MeV, including the accelerator equipment for radiographic film,computed radiography with imaging plates, real-time imaging, digital detector array and industrial computerized tomography.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International Standard specifies requirements for a quality management system when an organization: a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and b) aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements. All the requirements of this International Standard are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides. NOTE 1 In this International Standard, the terms "product" or "service" only apply to products and services intended for, or required by, a customer. NOTE 2 Statutory and regulatory requirements can be expressed as legal requirements. This International Standard applies to organizations supplying ITNS products or services. Application of this standard to organizations performing activities on a licensed nuclear site is subject to prior agreement by the Licensee. Requirements specified in this International Standard are complementary (not alternative) to customer and applicable statutory and regulatory requirements.

  • Standard
    43 pages
    English language
    sale 15% off
  • Standard
    38 pages
    French language
    sale 15% off

IEC 62976:2017 gives the rules of naming, technical requirements, test methods, inspection, marking, packaging, transportation, storage and accompanying documents for electron linear accelerator equipment for Non-Destructive Testing (NDT). This document applies to NDT electron linear accelerator equipment in the X-ray energy range of 1 MeV to 15 MeV, including the accelerator equipment for radiographic film, computed radiography with imaging plates, real-time imaging, digital detector array and industrial computerized tomography.

  • Standard
    46 pages
    English and French language
    sale 15% off

IEC 60412:2014 gives guidelines for scintillation detectors and scintillators nomenclature (identification) and standard dimensions of scintillators. This International Standard is applicable to all types of solid organic and inorganic scintillators used in detectors for scintillation counting and spectrometry. The object of this standard is to define a standardized nomenclature for scintillation detectors in which most of the properties can be found. The object of this standard is also to standardize the dimensions of bare scintillators in order to facilitate interchangeability of non-encapsulated scintillators and to facilitate intercomparisons of measurements with encapsulated scintillators. The main technical changes with regard to the previous edition are as follows:
- nomenclature of scintillation detectors was expanded by phoswich detector and single-line multi-channel detector;
- some missing positions in the nomenclature of the previous edition were filled out.

  • Standard
    24 pages
    English and French language
    sale 15% off

IEC 60050-395:2014 gives the general terminology used in nuclear concepts, instruments, systems, equipment and detectors. This terminology is consistent with the terminology published in the other specialized parts of the IEV.
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    397 pages
    English and French language
    sale 15% off

This International Standard applies to the manufacture and installation of electrical measuring systems and instruments utilizing radioactive sources (radiometric gauges, hereinafter called gauges). It also applies to source housings intended for use in the aforementioned measuring systems. This standard applies to equipment, which is not related to power production or to the fuel cycle. It does not apply to portable gauges which, because of their construction and purposes for use, are intended to be operated as mobile equipment and it does not apply to gauges operated with X-ray tubes, but it can be analogously applicable to these gauges. The object of this standard is to specify constructional requirements for the design of instruments utilizing radioactive sources in regard of radiation protection. This standard does not take into account mechanical or electrical hazards.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61435:2013(E) is applicable to high-purity germanium crystals used for radiation detectors for gamma-rays and X-rays. Such germanium is monocrystalline and has a net concentration of fewer than 1011 electrically active impurity centers per cm3. This International Standard specifies terminology and test methods for measurements of basic characteristics of high-purity germanium crystals. Test methods for completed assembled germanium detectors are given in IEC 60973 and IEC 60759. The main technical changes with regard to the previous edition are as follows:
- review the existing requirements;
- update the terminology and definitions.

  • Standard
    32 pages
    English language
    sale 15% off

IEC 62495:2011(E) is applicable to the radiological safety of portable handheld X-ray fluorescence (XRF) analysis equipment utilizing a miniature X-ray tube as the source of ionizing radiation for industrial applications. Establishes performance specifications for general radiation, electrical, safety and environmental characteristics of the design and operation, and test methods in relation to radiological safety for portable XRF analysis equipment utilizing a miniature X-ray tube. The proposed performance specifications are aimed at minimizing and avoiding the health risk associated with the use of these devices.

  • Standard
    19 pages
    English language
    sale 15% off

IEC 62598:2011 applies to the manufacture and installation of electrical measuring systems and instruments utilizing radioactive sources (radiometric gauges, hereinafter called gauges). It also applies to source housings intended for use in the aforementioned measuring systems. This standard applies to equipment, which is not related to power production or to the fuel cycle. It specifies constructional requirements for the design of instruments utilizing radioactive sources in regard of radiation protection. This standards cancels and replaces IEC 60405.

  • Standard
    48 pages
    English and French language
    sale 15% off

IEC 60462:2010(E) establishes test procedures for photomultiplier tubes (PMT) for scintillation and Cherenkov detectors. The tests described are supplementary to those described in IEC 60306-4. The main technical changes of this new edition with regard to the previous one are as follows:
- the requirements have been revised and the terminology,
- definitions and normative references have been brought up-to-date.

  • Standard
    23 pages
    English language
    sale 15% off

Specifies methods of calibration and routine tests of scintillation detector systems for the measurement of gamma-ray energies and emission rates of radionuclides and the assay of radioactivity. Is applicable to scintillation detector systems based on inorganic scintillators for photon measurements. This second edition reflects an expansion of detector types considered.

  • Standard
    37 pages
    English and French language
    sale 15% off

This document specifies the format of binary list-mode data at the output of digital data acquisition devices used for the detection and measurement of radiation. Such data acquisition devices may employ digital signal processors (DSP) and field-programmable gate arrays (FPGA) in combination with memory and a communication interface with a computer.

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document complements the existing requirements of ISO/IEC 17021-1 for bodies providing audit and certification of quality management systems against ISO 19443.
NOTE   This document is recommended for use as a criteria document for accreditation, peer assessment or other audit processes.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Is applicable to housed scintillators for registration and spectrometry of alpha-, beta-, gamma-, X-ray and neutron radiation. Establishes basic parameters such as a light output and intrinsic resolution and specifies the requirements for the equipment and the methods of defining the basic parameters.

  • Standard
    35 pages
    English and French language
    sale 15% off

Recommends a limited family of preferred standard coaxial connectors for nuclear laboratory instruments. Applies to coaxial connectors for electrical instruments used in nuclear laboratories.

  • Standard
    11 pages
    English and French language
    sale 15% off

Establishes standard methods for calibration and use of alpha/beta gas proportional counters, including measurement of their characteristics. Applies to alpha/beta gas proportional counting systems used for the determination of the alpha-ray or beta-ray emission rates of radionuclides in sample counting.

  • Standard
    67 pages
    English and French language
    sale 15% off

Establishes standard test procedures for photodiodes used in scintillation detectors and defines the parameters which shall be provided by the supplier for each type of photodiode.

  • Standard
    35 pages
    English and French language
    sale 15% off

Gives the standard values for the diameters, heights and wall thickness of planchets made in well flat and dish-type configurations.

  • Standardization document
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies constructional requirements for the design of instruments and the radiation protection to be provided in the case of radiometric gauges. Special attention is drawn to the stability of the source housing in the event of fire.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    10 pages
    English language
    sale 15% off