EN 61000-4-6:2007

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

Corrigendum to EN issued August 2007 * Superseded by EN 61000-4-6:2009

Elektromagnetische Verträglichkeit (EMV) - Teil 4-6: Prüf- und Messverfahren - Störfestigkeit gegen leitungsgeführte Störgrößen, induziert durch hochfrequente Felder

Compatibilité électromagnétique (CEM) - Partie 4-6: Techniques d'essai et de mesure - Immunité aux perturbations conduites, induites par les champs radioélectriques

Elektromagnetna združljivost (EMC) - 4-6. del: Preskusne in merilne tehnike - Odpornost proti motnjam po vodnikih, ki jih inducirajo radiofrekvenčna polja (IEC 61000-4-6:2003 + A1:2004 + A2:2006)

General Information

• Status: Withdrawn
• Publication Date: 14-Jun-2007
• Withdrawal Date: 31-May-2010
• ICS: 33.100.20 - Immunity
• Technical Committee: CLC/TC 210 - Electromagnetic Compatibility (EMC)
• Drafting Committee: IEC/SC 77B - IEC_SC_77B
• Parallel Committee: IEC/SC 77B - IEC_SC_77B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Mar-2012
• Completion Date: 01-Mar-2012
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 89/336/EEC - Electromagnetic compatibility (EMC)
• Ref Project: SIST EN 61000-4-6:2008 - Electromagnetic compatibility (EMC) -- Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

Relations

• Replaces: EN 61000-4-6:1996/IS1:2004 - Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
• Effective Date: 28-Jan-2023
• Replaces: EN 61000-4-6:1996/A1:2001 - Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
• Effective Date: 28-Jan-2023
• Replaces: EN 61000-4-6:1996 - Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
• Effective Date: 28-Jan-2023
• Replaced By: EN 61000-4-6:2009 - Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
• Effective Date: 29-Jan-2023
• Revises: EN 61000-4-6:2007/IS1:2009 - Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2008
1DGRPHãþD
SIST EN 61000-4-6:1997
SIST EN 61000-4-6:1997/A1:2002
SIST EN 61000-4-6:1997/IS1:2007
(OHNWURPDJQHWQD]GUXåOMLYRVW(0&GHO3UHVNXVQHLQPHULOQHWHKQLNH
2GSRUQRVWSURWLPRWQMDPSRYRGQLNLKNLMLKLQGXFLUDMRUDGLRIUHNYHQþQDSROMD,(&
$$
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques -
Immunity to conducted disturbances, induced by radio-frequency fields
Elektromagnetische Verträglichkeit (EMV) - Teil 4-6: Prüf- und Messverfahren -
Störfestigkeit gegen leitungsgeführte Störgrößen, induziert durch hochfrequente Felder
Compatibilité électromagnétique (CEM) - Partie 4-6: Techniques d'essai et de mesure -
Immunité aux perturbations conduites, induites par les champs radioélectriques
Ta slovenski standard je istoveten z: EN 61000-4-6:2007
ICS:
33.100.20
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61000-4-6
NORME EUROPÉENNE
June 2007
EUROPÄISCHE NORM
ICS 33.100.20 Supersedes EN 61000-4-6:1996 + A1:2001 and EN 61000-4-6:1996/IS1:2004

English version
Electromagnetic compatibility (EMC) -
Part 4-6: Testing and measurement techniques -
Immunity to conducted disturbances,
induced by radio-frequency fields
(IEC 61000-4-6:2003 + A1:2004 + A2:2006)

Compatibilité électromagnétique (CEM) -  Elektromagnetische
Partie 4-6: Techniques d'essai Verträglichkeit (EMV) -
et de mesure - Teil 4-6: Prüf- und Messverfahren -
Immunité aux perturbations conduites, Störfestigkeit gegen leitungsgeführte
induites par les champs radioélectriques Störgrößen, induziert durch
(CEI 61000-4-6:2003 + A1:2004 + hochfrequente Felder
A2:2006) (IEC 61000-4-6:2003 + A1:2004 +
A2:2006)
This European Standard was approved by CENELEC on 2007-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61000-4-6:2007 E
Foreword
The text of the International Standard IEC 61000-4-6:2006 and its amendments 1:2004 and 2:2006,
prepared by SC 77B, High frequency phenomena, of IEC TC 77, Electromagnetic compatibility, was
submitted to the formal vote and was approved by CENELEC as EN 61000-4-6 on 2007-06-01 without
any modification.
This European Standard supersedes EN 61000-4-6:1996 + A1:2001 and EN 61000-4-6:1996/IS1:2004.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61000-4-6:2006 + A1:2004 + A2:2006 was approved by
CENELEC as a European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61000-4-3 NOTE  Harmonized as EN 61000-4-3:2002 (not modified).
CISPR 20 NOTE  Harmonized as EN 55020:2002 (not modified).
__________
- 3 - EN 61000-4-6:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1)
IEC 60050-161 - International Electrotechnical - -
Vocabulary (IEV) -
Chapter 161: Electromagnetic compatibility

1)
Undated reference.
Corrigendum to EN 61000-4-6:2007
English version
___________
Foreword
In the first paragraph, replace "IEC 61000-4-6:2006" by "IEC 61000-4-6:2003".

Endorsement notice
Replace "IEC 61000-4-6:2006" by "IEC 61000-4-6:2003".

___________
August 2007
IEC 61000-4-6
Edition 2.2 2006-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM
Electromagnetic compatibility (EMC) –
Part 4-6: Testing and measurement techniques – Immunity to conducted
disturbances, induced by radio-frequency fields

Compatibilité électromagnétique (CEM) –
Partie 4-6: Techniques d’essai et de mesure – Immunité aux perturbations
conduites, induites par les champs radioélectriques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CJ
CODE PRIX
ICS 33.100.20 ISBN 2-8318-8639-2

61000-4-6  IEC:2003+A1:2004 – 3 – – 2 – 61000-4-6 © IEC:2003+A1:2004+A2:2006
+A2:2006
CONTENTS
FOREWORD.4
INTRODUCTION.6

1 Scope and object .7
2 Normative references.7
3 Definitions .7
4 General .9
5 Test levels.10
6 Test equipment.10
6.1 Test generator.10
6.2 Coupling and decoupling devices .11
6.3 Verification of the common mode impedance at the EUT port of coupling
and decoupling devices.14
6.4 Setting of the test generator.15
7 Test set-up for table-top and floor-standing equipment .16
7.1 Rules for selecting injection methods and test points.16
7.2 Procedure for CDN injection application .18
7.3 Procedure for clamp injection when the common-mode impedance
requirements can be met .18
7.4 Procedure for clamp injection when the common-mode impedance
requirements cannot be met .19
7.5 Procedure for direct injection .19
7.6 EUT comprising a single unit .20
7.7 EUT comprising several units.20
8 Test procedure .20
9 Evaluation of the test results .21
10 Test report.22

Annex A (normative) Additional information regarding clamp injection.34
Annex B (informative) Selection criteria for the frequency range of application.39
Annex C (informative) Guide for selecting test levels .41
Annex D (informative) Information on coupling and decoupling networks .42
Annex E (informative) Information for the test generator specification.46
Annex F (informative) Test set-up for large EUTs .47

Bibliography .50

Figure 1 – Rules for selecting the injection method .17
Figure 2 – Immunity test to RF conducted disturbances .24
Figure 3 – Test generator set-up .25
Figure 4 – Definition of the wave shapes occurring at the output of the EUT
port of a coupling device (e.m.f. of test level 1).25
Figure 5 – Principle of coupling and decoupling .28

61000-4-6 © IEC:2003+A1:2004+A2:2006 61000-4-6  IEC:2003+A1:2004 – 5 – – 3 –
+A2:2006
Figure 6 – Principle of coupling and decoupling according to the clamp injection method .28
Figure 7 – Details of set-ups and components to verify the essential characteristics
of coupling and decoupling devices and the 150 Ω to 50 Ω adapters .30
Figure 8 – Set-up for level setting (see 6.4.1) .31
Figure 9 – Example of test set-up with a single unit system.32
Figure 10 – Example of a test set-up with a multi-unit system .33
Figure A.1 – Circuit for level setting set-up in a 50 Ω test Jig .35
Figure A.2 – The 50 Ω test jig construction .35
Figure A.3 – Construction details of the EM clamp.36
Figure A.4 – Concept of the EM clamp (electromagnetic clamp).37
Figure A.5 – Coupling factor of the EM clamp .37
Figure A.6 – General principle of a test set-up using Injection clamps .38
Figure A.7 – Example of the test unit locations on the ground plane
when using injection clamps (top view) .38
Figure B.1 – Start frequency as function of cable length and equipment size.40
Figure D.1 – Example of a simplified diagram for the circuit of CDN-S1
used with screened cables (see 6.2.1).43
Figure D.2 – Example of simplified diagram for the circuit of CDN-M1/-M2/-M3
used with unscreened supply (mains) lines (see 6.2.2.1).43
Figure D.3 – Example of a simplified diagram for the circuit of CDN-AF2
used with unscreened non-balanced lines (see 6.2.2.3) .44
Figure D.4 – Example of a simplified diagram for the circuit of a CDN-T2,
used with an unscreened balanced pair (see 6.2.2.2).44
Figure D.5 – Example of a simplified diagram of the circuit of a CDN-T4
used with unscreened balanced pairs (see 6.2.2.2).45
Figure D.6 – Example of a simplified diagram of the circuit of a CDN-T8
used with unscreened balanced pairs (see 6.2.2.2).45
Figure F.1 – Example of large EUT test set-up
with elevated horizontal ground reference plane .48
Figure F.2 – Example of large EUT test set-up with vertical ground reference plane.49

Table 1 – Test levels .10
Table 2 – Characteristics of the test generator.11
Table 3 – Main parameter of the combination of the coupling and decoupling device.11
Table B.1 – Main parameter of the combination of the coupling and decoupling device
when the frequency range of test is extended above 80 MHz .
...