EN 60255-26:2009
(Main)Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements
Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements
IEC 60255-26:2008 is applicable to measuring relays and protection equipment for power system protection, including the control, monitoring and process interface equipment used with those systems; it specifies the essential requirements for electromagnetic compatibility for measuring relays and protection equipment intended to be used at industrial locations. The main difference of this new edition with respect to the previous one concerns the references to IEC 61000-4 and to CISPR 22.
Messrelais und Schutzeinrichtungen - Teil 26: Anforderungen an die elektromagnetische Verträglichkeit
Relais de mesure et dispositifs de protection - Partie 26: Exigences de compatibilité électromagnétique
La CEI 60255-26:2008 est applicable aux relais de mesure et dispositifs de protection pour la protection des réseaux d'énergie, y compris les fonctions de contrôle, surveillance et communication intégrées, utilisées dans ces réseaux; cette norme spécifie les exigences de compatibilité électromagnétique pour les relais de mesure et dispositifs de protection destinés à être utilisés dans des locaux industriels. La principale différence de cette nouvelle édition par rapport à la précédente est relative à la référence à la CEI 61000-4 et à la CISPR 22.
Električni releji in zaščitna oprema - 26. del: Zahteve za elektromagnetno združljivost (IEC 60255-26:2008)
Ta del IEC 60255 velja za merilne releje in zaščitno opremo za zaščito napajalnih sistemov, vključno z opremo za nadzor, spremljanje in vmesniško procesno opremo, ki se uporablja s temi sistemi. Ta standard opredeljuje bistvene zahteve za elektromagnetno združljivost za merilne releje in zaščitno opremo, ki se uporabljajo na industrijskih lokacijah. Za merilne releje in zaščitno opremo, ki se uporabljajo na razdelilnih postajah in elektrarnah, so lahko zahtevane preskusne ravni višje imunosti. Za opremo, ki ne vsebuje elektronskih vezij, na primer elektromehanski releji, niso potrebni preskusi v skladu s tem standardom. Zahteve, ki jih določa ta standard, veljajo za merilne releje in zaščitno opremo v novih pogojih; vsi navedeni preskusi pa so le tipski preskusi.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60255-26:2010
01-januar-2010
1DGRPHãþD
SIST EN 50263:2001
SIST EN 60255-26:2005
(OHNWULþQLUHOHMLLQ]DãþLWQDRSUHPDGHO=DKWHYH]DHOHNWURPDJQHWQR
]GUXåOMLYRVW,(&
Measuring relays and protection equipment -- Part 26: Electromagnetic compatibility
requirements
Messrelais und Schutzeinrichtungen -- Teil 26: Anforderungen an die elektromagnetische
Verträglichkeit
Relais de mesure et dispositifs de protection -- Partie 26: Exigences de compatibilité
électromagnétique
Ta slovenski standard je istoveten z: EN 60255-26:2009
ICS:
29.120.70 Releji Relays
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 60255-26:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60255-26:2010
---------------------- Page: 2 ----------------------
SIST EN 60255-26:2010
EUROPEAN STANDARD
EN 60255-26
NORME EUROPÉENNE
October 2009
EUROPÄISCHE NORM
ICS 29.120.70; 33.100.10; 33.100.20 Supersedes EN 50263:1999 and EN 60255-26:2005
English version
Measuring relays and protection equipment -
Part 26: Electromagnetic compatibility requirements
(IEC 60255-26:2008)
Relais de mesure Messrelais und Schutzeinrichtungen -
et dispositifs de protection - Teil 26: Anforderungen an die
Partie 26: Exigences de compatibilité elektromagnetische Verträglichkeit
électromagnétique (IEC 60255-26:2008)
(CEI 60255-26:2008)
This European Standard was approved by CENELEC on 2009-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60255-26:2009 E
---------------------- Page: 3 ----------------------
SIST EN 60255-26:2010
EN 60255-26:2009 - 2 -
Foreword
The text of document 95/230/FDIS, future edition 2 of IEC 60255-26, prepared by IEC TC 95, Measuring
relays and protection equipment, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60255-26 on 2009-09-01.
This European Standard supersedes EN 60255-26:2005 and EN 50263:1999.
The main difference with respect to EN 60255-26:2005 concerns the reference to EN 61000-4 series and
to EN 55022.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-09-01
Annexes ZA and ZZ have been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60255-26:2008 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 60255-26:2010
- 3 - EN 60255-26:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60255-11 1979 Electrical relays - - -
Part 11: Interruptions to and alternating
component (ripple) in d.c. auxiliary energizing
quantity of measuring relays
IEC 60255
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.