EN 60512-29-100:2015

Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g

IEC 60512-29-100:2015 specifies the test methods for transmission performance for M12-style connectors up to 500 MHz. It is also suitable for testing lower frequency connectors if they meet the requirements of the detail specifications and of this standard. The test methods provided herein are: - insertion loss, test 29a; - return loss, test 29b; - near-end crosstalk (NEXT) test 29c; - far-end crosstalk (FEXT), test 29d; - transverse conversion loss (TCL), test 29f; - transverse conversion transfer loss (TCTL), test 29g. For the transfer impedance (ZT) test, see IEC 60512-26-100, test 26e. For the coupling attenuation see ISO/IEC 11801. All test methods apply for two and four pair connectors. Key words: Connectors, Signal Integrity, M12 Style Connector

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 29-100: Signalintegritätsprüfungen bis 500 MHz an Steckverbindern M12 - Prüfungen 29a bis 29g

Connecteurs pour équipements électroniques - Essais et mesures - Partie 29-100: Essais d'intégrité des signaux jusqu'à 500 MHz sur les connecteurs de type M12 – Essais 29a à 29g

L'IEC 60512-29-100:2015 spécifie les méthodes d'essais pour les performances des transmissions pour les connecteurs de type M12 jusqu'à 500 MHz. Elle est également applicable aux essais réalisés sur des connecteurs à fréquences plus basses s'ils satisfont aux exigences des spécifications particulières et de la présente norme. Les méthodes d'essai spécifiées ici sont: - perte d'insertion, essai 29a; - affaiblissement de réflexion, essai 29b; - paradiaphonie (NEXT), essai 29c; - télédiaphonie (FEXT), essai 29d; - perte de conversion transverse (TCL), essai 29f; - perte de transfert de conversion transverse (TCTL), essai 29g. Pour l'essai d'impédance de transfert (ZT), voir l'IEC 60512-26-100, essai 26e. Pour l'affaiblissement de couplage, voir l'ISO/IEC 11801. Toutes les figures représentent des principes pour des câblages de quatre paires Mots-clés: Connecteurs, Intégrité des signaux, Connecteurs de type M12

Konektorji za elektronsko opremo - Preskusi in meritve - 29-100. del: Preskusi signalne celovitosti do 500 MHz na konektorjih M12 - Preskusi od 29a do 29g

Ta del standarda IEC 60512 določa preskusne metode za lastnosti prenosa na konektorjih M12 do 500 MHz. Prav tako je primeren za preskušanje konektorjev z nižjimi frekvencami, če ustrezajo zahtevam podrobnih specifikacij in tega standarda.
OPOMBA 1 Številke prikazujejo opremo za konektorje skladno s standardom IEC 61076-2-109 kot primer.
V nadaljevanju so podane naslednje preskusne metode:
– dodano dušenje, preskus 29a;
– povratno dušenje, preskus 29b;
– bližnji presluh (NEXT), preskus 29c;
– daljni presluh (FEXT), preskus 29d;
– prečno dušenje pretvorbe (TCL), preskus 29f;
– prečno dušenje pretvorbe prenosa (TCTL), preskus 29g.
Za preskus impedance prenosa (ZT) glejte IEC 60512-26-100, preskus 26e.
Za slabljenje stikov glejte ISO/IEC 11801.
Vse preskusne metode se uporabljajo za dvo- in štirižilne konektorje.
OPOMBA 2 Številke prikazujejo sheme za štirižilne kable in so ustrezne tudi za dvožilne kable.

General Information

• Status: Published
• Publication Date: 17-Sep-2015
• Withdrawal Date: 08-Apr-2018
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 18-Sep-2015
• Completion Date: 18-Sep-2015
• Ref Project: SIST EN 60512-29-100:2015 - Connectors for electronic equipment - Tests and measurements -- Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60512-29-100:2015
01-december-2015
Konektorji za elektronsko opremo - Preskusi in meritve - 29-100. del: Preskusi
signalne celovitosti do 500 MHz na konektorjih M12 - Preskusi od 29a do 29g
Connectors for electronic equipment - Tests and measurements -- Part 29-100: Signal
integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
Steckverbinder für elektronische Einrichtungen – Mess- und Prüfverfahren – Teil 29-100:
Signalintegritätsprüfungen bis 500 MHz an Steckverbindern M12 – Prüfungen 29a bis
29g
Ta slovenski standard je istoveten z: EN 60512-29-100:2015
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60512-29-100:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60512-29-100:2015

---------------------- Page: 2 ----------------------

SIST EN 60512-29-100:2015


EUROPEAN STANDARD EN 60512-29-100

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2015
ICS 31.220.10

English Version
Connectors for electronic equipment - Tests and measurements
- Part 29-100: Signal integrity tests up to 500 MHz on M12 style
connectors - Tests 29a to 29g
(IEC 60512-29-100:2015)
Connecteurs pour équipements électroniques - Essais et Steckverbinder für elektronische Einrichtungen - Mess- und
mesures - Partie 29-100: Essais d'intégrité des signaux Prüfverfahren - Teil 29-100: Signalintegritätsprüfungen bis
jusqu'à 500 MHz sur les connecteurs de type M12 - Essais 500 MHz an Steckverbindern M12 - Prüfungen 29a bis 29g
29a à 29g (IEC 60512-29-100:2015)
(IEC 60512-29-100:2015)
This European Standard was approved by CENELEC on 2015-04-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60512-29-100:2015 E

---------------------- Page: 3 ----------------------

SIST EN 60512-29-100:2015
EN 60512-29-100:2015
European foreword
The text of document 48B/2410/FDIS, future edition 1 of IEC 60512-29-100, prepared by
SC 48B "Connectors" of IEC/TC 48 "Electromechanical components and mechanical structures for
electronic equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN 60512-29-100:2015.

The following dates are fixed:
• latest date by which the document has to be (dop) 2016-03-18
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-04-09
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 60512-29-100:2015 was approved by CENELEC as a
European Standard without any modification.
IEC 60512-27-100 NOTE Harmonized as EN 60512-27-100.

2

---------------------- Page: 4 ----------------------

SIST EN 60512-29-100:2015
 EN 60512-29-100:2015

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE
...