EN 60832:1996

Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working

Applies to insulating poles (insulating sticks), and tool attachments (fittings) and is divided into three chapters. Chapter I: Specifies the required characteristics for insulating poles with permanently attached fittings and the tests (electrical and mechanical) which should be satisfied by these tools. Chapter II: Specifies the required characteristics for parts which may be attached to and detached from the ends of poles described in Chapter I, and the tests which should be satisfied by these tools. Chapter Ill: Specifies the special clauses, applicable to insulating poles and universal tool attachments.

Isolierende Arbeitsstangen und zugehörige Arbeitsköpfe zum Arbeiten unter Spannung

Perches isolantes et outils adaptables pour travaux sous tension

S'applique aux perches isolantes et aux outils adaptables. Chapitre I: Traite des caractéristiques exigées pour les perches isolantes, munies d'embouts fixes, et des essais (électriques et mécaniques) auxquels doivent satisfaire ces outils. Chapitre II: Traite des caractéristiques exigées pour les outils qui peuvent être attachés ou détachés du bout des perches considérées dans le premier chapitre et traite des essais auxquels doivent atisfaire ces outils. Chapitre III: Traite des clauses spéciales applicables aux perches isolantes et aux outils adaptables.

Izolacijski drogovi (izolacijske palice) in univerzalni nastavki za orodja za delo pod napetostjo (IEC 60832:1988, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 16-Jun-1996
• Withdrawal Date: 28-Feb-1997
• ICS: 13.340.20 - Head protective equipment
• Technical Committee: CLC/TC 78 - Equipment and tools for live working
• Drafting Committee: IEC/TC 78 - IEC_TC_78
• Parallel Committee: IEC/TC 78 - IEC_TC_78
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Mar-2013
• Completion Date: 01-Mar-2013
• Ref Project: SIST EN 60832:2001 - Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working

Relations

• Replaced By: EN 60832-1:2010 - Live working - Insulating sticks and attachable devices - Part 1: Insulating sticks
• Effective Date: 28-Jan-2023
• Replaced By: EN 60832-2:2010 - Live working - Insulating sticks and attachable devices - Part 2: Attachable devices
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60832:2001
01-september-2001
Izolacijski drogovi (izolacijske palice) in univerzalni nastavki za orodja za delo pod
napetostjo (IEC 60832:1988, spremenjen)
Insulating poles (insulating sticks) and universal tool attachments (fittings) for live
working
Isolierende Arbeitsstangen und zugehörige Arbeitsköpfe zum Arbeiten unter Spannung
Perches isolantes et outils adaptables pour travaux sous tension
Ta slovenski standard je istoveten z: EN 60832:1996
ICS:
13.260 9DUVWYRSUHGHOHNWULþQLP Protection against electric
XGDURP'HORSRGQDSHWRVWMR shock. Live working
29.260.01 (OHNWULþQDRSUHPD]DGHORY Electrical equipment for
SRVHEQLKUD]PHUDKQD working in special conditions
VSORãQR in general
SIST EN 60832:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60832:2001

---------------------- Page: 2 ----------------------

SIST EN 60832:2001

---------------------- Page: 3 ----------------------

SIST EN 60832:2001

---------------------- Page: 4 ----------------------

SIST EN 60832:2001

---------------------- Page: 5 ----------------------

SIST EN 60832:2001

---------------------- Page: 6 ----------------------

SIST EN 60832:2001

---------------------- Page: 7 ----------------------

SIST EN 60832:2001

---------------------- Page: 8 ----------------------

SIST EN 60832:2001

---------------------- Page: 9 ----------------------

SIST EN 60832:2001

---------------------- Page: 10 ----------------------

SIST EN 60832:2001

---------------------- Page: 11 ----------------------

SIST EN 60832:2001

---------------------- Page: 12 ----------------------

SIST EN 60832:2001

---------------------- Page: 13 ----------------------

SIST EN 60832:2001

---------------------- Page: 14 ----------------------

SIST EN 60832:2001

---------------------- Page: 15 ----------------------

SIST EN 60832:2001

---------------------- Page: 16 ----------------------

SIST EN 60832:2001

---------------------- Page: 17 ----------------------

SIST EN 60832:2001

---------------------- Page: 18 ----------------------

SIST EN 60832:2001

---------------------- Page: 19 ----------------------

SIST EN 60832:2001

---------------------- Page: 20 ----------------------

SIST EN 60832:2001

---------------------- Page: 21 ----------------------

SIST EN 60832:2001

---------------------- Page: 22 ----------------------

SIST EN 60832:2001

---------------------- Page: 23 ----------------------

SIST EN 60832:2001

---------------------- Page: 24 ----------------------

SIST EN 60832:2001

---------------------- Page: 25 ----------------------

SIST EN 60832:2001

---------------------- Page: 26 ----------------------

SIST EN 60832:2001

---------------------- Page: 27 ----------------------

SIST EN 60832:2001

---------------------- Page: 28 ----------------------

SIST EN 60832:2001

---------------------- Page: 29 ----------------------

SIST EN 60832:2001

---------------------- Page: 30 ----------------------

SIST EN 60832:2001

-
...