iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60743:1996

(Main)

Terminology for tools and equipment to be used in live working

Terminology for tools and equipment to be used in live working

Applies to terminology for tools and equipment used in live working. This standard is not intended to be a dictionary giving detailed definitions of all the terms used in live working, but only the necessary details, without indications of their components and their methods of use, to permit identification of the tools and equipment and to standardize their names.

Terminologie für Geräte und Ausrüstungen zum Arbeiten unter Spannung

Terminologie pour l'outillage et le matériel à utiliser dans les travaux sous tension

S'applique à la terminologie pour l'outillage et le matériel utilisé dans les travaux sous tension. Cette norme n'est pas un dictionnaire donnant des définitions détaillées de tous les termes utilisés pour les travaux sous tension, mais est destinée à n'apporter que des détails nécessaires, sans indication de composantes ou de modes d'emploi, pour permettre l'identification de l'outillage et du matériel, et pour normaliser leurs noms.

Terminology for tools and equipment to be used in live working (IEC 60743:1983 + A1:1995)

General Information

Status
Withdrawn
Publication Date
16-Jun-1996
ICS
01.040.13 - Environment. Health protection. Safety (Vocabularies)
13.340.20 - Head protective equipment
Technical Committee
CLC/TC 78 - Equipment and tools for live working
Drafting Committee
IEC/TC 78 - IEC_TC_78
Parallel Committee
IEC/TC 78 - IEC_TC_78
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Dec-2004
Completion Date
01-Dec-2004
Directive
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
Mandate
M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
Ref Project
SIST EN 60743:2000 - Terminology for tools and equipment to be used in live working

Relations

Replaced By
EN 60743:2001 - Live working - Terminology for tools, equipment and devices
Effective Date
29-Jan-2023

Buy Standard

EN 60743:2000EN 60743:2000
PreviousNext
Standard
EN 60743:2000
English language
102 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Terminology for tools and equipment to be used in live working (IEC 60743:1983 + A1:1995)Terminologie für Geräte und Ausrüstungen zum Arbeiten unter SpannungTerminologie pour l'outillage et le matériel à utiliser dans les travaux sous tensionTerminology for tools and equipment to be used in live working13.260Protection against electric shock. Live working01.040.13Varstvo okolja in zdravja. Varnost (Slovarji)Environment and health protection. Safety (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 60743:1996SIST EN 60743:2000en01-april-2000SIST EN 60743:2000SLOVENSKI
STANDARD



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60743:2000



SIST EN 60
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61753-081-06:2023(Main)
Fibre optic interconnecting devices and passive components - Performance standard - Part 081-06: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category OP+ - Extended outdoor protected environment
kSIST FprEN IEC 61753-081-06:2023

IEC 61753-081-06:2023 contains the minimum initial test and measurement requirements and severities which a fibre optic middle-scale 1 × N (16 ≤ N ≤ 64) DWDM (dense wavelength division multiplexing) arrayed waveguide grating device with channel spacing of 50 GHz, 100 GHz or 200 GHz satisfies in order to be categorized as meeting the requirements of category OP+ (extended outdoor protected environment). The requirements are given for the DWDM devices with Gaussian passband profile and flat-top passband profile. The requirements exclude the devices with dynamic electrical temperature control.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62772:2023(Main)
Composite hollow core station post insulators with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria
kSIST FprEN IEC 62772:2023

This International Standard applies to composite hollow core station post insulators consisting of a load-bearing insulating tube (core) made of resin impregnated fibres, insulating filler material (solid, liquid, gaseous - pressurized or unpressurized), a housing (outside the insulating tube) made of polymeric material (for example silicone or ethylene-propylene) and fixing devices at the ends of the insulating tube. Composite hollow core station post insulators as defined in this standard are intended for general use in substations in both, outdoor and indoor environments, operating with a rated AC voltage greater than 1 000 V a.c. and a frequency not greater than 100 Hz or for use in direct current systems with a rated voltage greater than 1 500 V.d.c. The object of this standard is: to define the terms used; to prescribe test methods; to prescribe acceptance criteria. All the tests in this standard, apart from the thermal-mechanical test, are performed at normal ambient temperature. This standard does not prescribe tests that are characteristic of the apparatus of which the composite hollow core station post insulator ultimately may form a part (e.g. disconnector switch, reactor support, HVDC valves).

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50365:2023(Main)
Live Working - Electrically insulating helmets for use on low and medium voltage installations
kSIST FprEN 50365:2023

This standard is applicable to electrically insulating helmets used for working live or close to live parts on installations not exceeding 1 000 V AC or 1 500 V DC. These helmets, when used in conjunction with other electrically insulating protective equipment prevent dangerous current from passing through persons via their head.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61753-081-02:2023(Main)
Fibre optic interconnecting devices and passive components - Performance standard - Part 081-02: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments
kSIST FprEN IEC 61753-081-02:2023

IEC 61753-081-02:2023 contains the minimum initial test and measurement requirements and severities which a fibre optic middle-scale 1 × N (16 ≤ N ≤ 64) DWDM (dense wavelength division multiplexing) arrayed waveguide grating device with channel spacing of 50 GHz, 100 GHz or 200 GHz satisfies in order to be categorized as meeting the requirements of category C (controlled environment). The requirements are given for the DWDM devices with Gaussian passband profile and flat-top passband profile. The requirements exclude the devices with dynamic electrical temperature control. This first edition cancels and replaces IEC 61753-081-2 published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61753-081-2:2014: a) change of test conditions harmonizing with IEC 61753-1:2018; b) harmonization of the measurement uncertainties in Table 2 to Table 4 with IEC 61753-081-03 and IEC 61753-081-06.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60893-2:2023(Main)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
kSIST FprEN IEC 60893-2:2023

IEC 60893-2:2023 is available as IEC 60893-2:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60893-2:2023 describes methods of test for the materials defined in IEC 60893-1 (referred to also as Part 1). This third edition cancels and replaces the second edition published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) removal of reference to withdrawn specification IEC 60167:1964; b) inclusion of reference to IEC 62631-3-3:2015, which supersedes IEC 60167:1964. Details in 6.3 have been updated accordingly. The actual performance of the test has not changed; c) normative references have been updated.

  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61753-081-03:2023(Main)
Fibre optic interconnecting devices and passive components - Performance standard - Part 081-03: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category OP - Outdoor protected environment
kSIST FprEN IEC 61753-081-03:2023

IEC 61753-081-03:2023 contains the minimum initial test and measurement requirements and severities which a fibre optic middle-scale 1 × N (16 ≤ N ≤ 64) DWDM (dense wavelength division multiplexing) arrayed waveguide grating device with channel spacing of 50 GHz, 100 GHz or 200 GHz satisfies in order to be categorized as meeting the requirements of category OP (outdoor protected environment). The requirements are given for the DWDM devices with Gaussian passband profile and flat-top passband profile. The requirements exclude the devices with dynamic electrical temperature control.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CEN/CLC ISO/IEC/TR 24027:2023(Main)
Information technology - Artificial intelligence (AI) - Bias in AI systems and AI aided decision making (ISO/IEC TR 24027:2021)
kSIST-TP FprEN ISO/IEC/TR 24027:2023

This document addresses bias in relation to AI systems, especially with regards to AI-aided decision-making. Measurement techniques and methods for assessing bias are described, with the aim to address and treat bias-related vulnerabilities. All AI system lifecycle phases are in scope, including but not limited to data collection, training, continual learning, design, testing, evaluation and use.

  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60143-1:2015/A1:2023(Amendment)
Series capacitors for power systems - Part 1: General
SIST EN 60143-1:2015/A1:2024
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60809:2021/A1:2023(Amendment)
Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements
SIST EN IEC 60809:2021/A1:2024
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60601-2-21:2021/A1:2023(Amendment)
Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
SIST EN IEC 60601-2-21:2021/A1:2024
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day