Basic principles for graphical symbols for use on equipment - Part 1: Creation of graphical symbols for registration

IEC 80416-1:2008 provides basic principles and guidelines for the creation of graphical symbols for registration, and provides the key principles and rules for the preparation of title, description and note(s). This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) Clause 8 in the previous edition is moved to Clause 4;
b) Mandatory requirement for the line width in symbol originals is changed to 2 mm or 4 mm (see 6th paragraph of 7.3);
c) For negation of a graphical symbol, a single diagonal bar is allowed in addition to two diagonal bars at right angles;
d) A new meaning of negation "do not" is allowed;
e) Some freedom is given for use of the basic pattern such as for symbol originals to be within the 75 mm square instead of the octagon;
f) Annex A (normative) is newly introduced for provisions on title, description and notes;
g) The nature of notes is changed to be purely informative; and
h) Clause 10 in the previous edition is moved to Annex C (informative).
It has the status of a horizontal standard in accordance with IEC Guide 108. This International Standard has been prepared in co-operation with ISO/TC145/SC 3. It is published as a double logo standard.

Principes de base pour les symboles graphiques utilisables sur le matériel - Partie 1: Création des symboles graphiques pour enregistrement

La CEI 80416-1:2008 fournit les principes de base et les lignes directrices pour la création des symboles graphiques pour enregistrement et fournit les principes clés et les règles pour l'élaboration du titre, de la description et des notes. Cette deuxième édition annule et remplace la première édition parue en 2001. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) L'Article 8 de l'édition précédente est déplacé à l'Article 4.
b) L'exigence obligatoire concernant la largeur du trait dans lesdessins originaux de symboles a été changée à 2 mm ou 4 mm (voir 6ème alinéa du paragraphe 7.3);
c) Pour la négation d'un symbole graphique, un seul trait diagonal est permis en plus des deux traits diagonaux perpendiculaires;
d) Une nouvelle forme de négation, "ne pas" est permise;
e) Un certain degré de liberté est permis pour l'utilisation de la grille de base, comme par exemple pour les dessins originaux de symboles qui doivent être dans le carré de 75 mm à la place de l'octogone;
f) L'Annexe A (normative) est introduite pour des dispositions concernant le titre, la description et les notes;
g) La nature des notes est modifiée pour être purement informative; et
h) L'Article 10 de l'édition précédente est déplacé à l'Annexe C (informative).
Elle a le statut de norme horizontale conformément au Guide IEC 108. La présente Norme internationale a été établie en coopération avec l'ISO/TC 145/SC 3. Elle est publiée comme norme double logo.

General Information

Status
Published
Publication Date
12-Nov-2008
Current Stage
PPUB - Publication issued
Start Date
30-Nov-2008
Completion Date
13-Nov-2008
Ref Project

Buy Standard

Standard
IEC 80416-1:2008 - Basic principles for graphical symbols for use on equipment - Part 1: Creation of graphical symbols for registration
English and French language
45 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 80416-1
Edition 2.0 2008-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Basic principles for graphical symbols for use on equipment –
Part 1: Creation of graphical symbols for registration

Principes de base pour les symboles graphiques utilisables sur le matériel –
Partie 1: Création des symboles graphiques pour enregistrement

IEC 80416-1:2008

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2008 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00


A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00

---------------------- Page: 2 ----------------------
IEC 80416-1
Edition 2.0 2008-11
INTERNATIONAL
STANDARD
NORME
IN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.