IEC 60286-3-2:2009

Packaging of components for automatic handling - Part 3-2: Packaging of surface mount components on continuous tapes - Type VI - Blister carrier tapes of 4 mm width

IEC 60286-3-2:2009 is applicable to the tape packing of ultra small surface mount components using plastic blister carrier tape of 4 mm in width which has concave cavities for containing components of 1 mm in pitch of the component compartments (W4P1).

Emballage de composants pour opérations automatisées - Partie 3-2: Emballage de composants pour montage en surface sur des bandes continues - Type VI - bandes porteuses à cloques de 4 mm de large

L'IEC 60286-3-2:2009 s'applique à l'emballage en bande des composants pour montage en surface de très petite taille utilisant des bandes porteuses à cloque en plastique d'une largeur de 4 mm qui possèdent des cavités concaves pour contenir des composants au pas d'un millimètre des compartiments de composant (W4P1).

General Information

• Status: Replaced
• Publication Date: 12-May-2009
• ICS: 31.020 - Electronic components in general
• ICS: 31.240 - Mechanical structures for electronic equipment
• Technical Committee: TC 40 - Capacitors and resistors for electronic equipment
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 17-May-2013

Relations

• Replaced By: IEC 60286-3:2013 - Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60286-3-2
®
Edition 1.0 2009-05
INTERNATIONAL
STANDARD


Packaging of components for automatic handling –
Part 3-2: Packaging of surface mount components on continuous tapes –
Type VI – Blister carrier tapes of 4 mm width



IEC 60286-3-2:2009(E)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2009 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]

---------------------- Page: 2 ----------------------
IEC 60286-3-2
®
Edition 1.0 2009-05
INTERNATIONAL
STANDARD


Packaging of components for automatic handling –
Part 3-2: Packaging of surface mount components on continuous tapes –
Type VI – Blister carrier tapes of 4 mm width


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
K
ICS 31.020; 31.240 ISBN 978-2-88910-092-7
® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – 60286-3-2 © IEC:2009(E)
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 General .5
1.1 Scope.5
1.2 Normative references .5
2 Tape dimensions .6
3 Polarity and orientation of components in the tape .8
4 Fixing components and additional tape requirements.8
4.1 Tape requirements .8
4.2 Peel force of the cover tape.9
4.3 Minimum bending radius.9
4.4 Break force of the cover tapes.9
4.5 Taping material .9
5 Packing .9
5.1 General .9
5.2 Reel dimensions.9
6 Marking .9
Annex A (informative) Dimensions of reel .10

Figure 1 – Type VI carrier tape .6
Figure 2 – Maximum pocket off-set .6
Figure 3 – Maximum component tilt, rotation and lateral movement .7
Figure A.1 – Reel.10

Table 1 – Constant dimensions of carrier tape .7
Table 2 – Variable dimensions of carrier tape .8
Table A.1 – Dimensions of reel .10

---------------------- Page: 4 ----------------------
60286-3-2 © IEC:2009(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING –

Part 3-2: Packaging of surface mount components on continuous tapes –
Type VI – Blister carrier tapes of 4 mm width


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance
...

IEC 60286-3-2
®

Edition 1.0 2009-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Packaging of components for automatic handling –
Part 3-2: Packaging of surface mount components on continuous tapes –
Type VI – Blister carrier tapes of 4 mm width

Emballage de composants pour opérations automatisées –
Partie 3-2: Emballage de composants pour montage en surface sur des bandes
continues – Type VI – Bandes porteuses à cloques de 4 mm de large

IEC 60286-3-2:2009-05(en-fr)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2009 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].


A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.


Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC Plus de 55 000 entrées terminologiques électrotechniques, en
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
[e-mail].

---------------------- Page: 2 ----------------------
IEC 60286-3-2

®


Edition 1.0 2009-05




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Packaging of components for automatic handling –

Part 3-2: Packaging of surface mount components on continuous tapes –

Type VI – Blister carrier tapes of 4 mm width




Emballage de composants pour opérations automatisées –

Partie 3-2: Emballage de composants pour montage en surface sur des bandes


continues – Type VI – Bandes porteuses à cloques de 4 mm de large













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX K


ICS 31.020; 31.240 ISBN 978-2-8322-1601-9



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 3 ----------------------
– 2 – IEC 60286-3-2:2009 © IEC 2009
CONTENTS

FOREWORD . 3
INTRODUCTION . 5
1 General . 5
1.1 Scope . 5
1.2 Normative references . 5
2 Tape dimensions . 6
3 Polarity and orientation of components in the tape . 8
4 Fixing components and additional tape requirements . 8
4.1 Tape requirements . 8
4.2 Peel force of the cover tape . 9
4.3 Minimum bending radius . 9
4.4 Break force of the cover tapes . 9
4.5 Taping material . 9
5 Packing . 9
5.1 General . 9
5.2 Reel dimensions . 9
6 Marking . 9
Annex A (informative) Dimensions of reel . 10

Figure 1 – Type VI carrier tape . 6
Figure 2 – Maximum pocket off-set . 6
Figure 3 – Maximum component tilt, rotation and lateral movement . 7
Figure A.1 – Reel . 10

Table 1 – Constant dimensions of carrier tape . 7
Table 2 – Variable dimensions of carrier tape . 8
Table A.1 – Dimensions of reel . 10

---------------------- Page: 4 ----------------------
IEC 60286-3-2:2009 © IEC 2009 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING –

Part 3-2: Packaging of surface mount components on continuous tapes –
Type VI – Blister carrier tapes of 4 mm width


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60286-3-2 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
This bilingual version (2014-05) corresponds to the English version, published in 2009-05.
The text of this standard is based on the following documents:
FDIS Report on voting
40/1973/FDIS 40/1982/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
The French version of this standard has not been voted upon.

---------------------- Page: 5 ----------------------
– 4 – IEC 60286-3-2:2009 © IEC 2009
IEC 60286-3-2 is to be used in conjunction with IEC 60286-3.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The list of all parts of the IEC 60286 series, under the general title Packaging of components
for automatic handling, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 6 ----------------------
IEC 60286-3-2:2009 © IEC 2009 – 5 –
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING –

Part 3-2: Packaging of surface mount components on continuous tapes –
Type VI – Blister carrier tapes of 4 mm width



INTRODUCTION
Tape packaging meets the requirements of automatic component placement machines and
also covers the use of tape packing for components for test purpose and other operations.
This International Standard has been developed to introduce a new 4 mm width carrier tape
with 1 mm pitch cavities suitable for very small components. This can be used to replace
paper tape for processing in clean rooms where particulates have to be controlled.
1 General
1.1 Scope
This part of IEC 60286 is applicable to the tape packing of ultra small surface mount
components using plastic blister carrier tape of 4 mm in width which has concave cavities for
containing components of 1 mm in pitch of the component compartments (W4P1).
1.2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60286-3:2007, Packaging of components for automatic handling – Part 3: Packaging of
surface mount components on continuous tapes

---------------------- Page: 7 ----------------------
– 6 – IEC 60286-3-2:2009 © IEC 2009
2 Tape dimensions

Origin
P
0
T D P
0 2
Cover
E
1
tape
F
K
0
W
E
2
B
B 0
1
G
P
T 1
1
A
0
T
2
Direction of unreeling
IEC  609/09

Figure 1 – Type VI carrier tape
Pocket off-set:

0,03 mm maximum on either side
IEC  610/09

Figure 2 – Maximum pocket off-set

---------------------- Page: 8 ----------------------
IEC 60286-3-2:2009 © IEC 2009 – 7 –

20° maximum

See also Table 2, Note c)



See Table 2, Note d)

Typical

cavity

centre line
20° maximum
See also Tabl e 2, Note c)
B
0
Typical
component
centre line
A
0

Component tilt Component planar Component lateral
rotation movements
Side or front

sectional view Top view
Top view


Sketch A Sketch B
Sketch C
IEC  611/09



Figure 3 – Maximum component tilt, rotation and lateral movement
Table 1 – Constant dimensions of carrier tape
Cumulative pitch
Tape size D E G P T T T

0 1 min 0 min max 1 max
(over 20 pitches)
mm mm mm mm mm mm mm mm

mm
4 0,80 ± 0,04 0,90 ± 0,05 0,50 2,00 ± 0,04 0,15 0,40 0,08 ±0,1

---------------------- Page: 9 ----------------------
– 8 – IEC 60286-3-2:2009 © IEC 2009
Table 2 – Variable dimensions of carrier tape
Tape size B E F P P T W A , B , K
1 max 2 min 1 2 2 max 0 0 0
mm mm mm mm mm mm mm mm mm

a
4 1,48 3,07 1,1 see Note
1,8 ± 0,03 1,0 ± 0,03 1,0 ± 0,03 4,0 ± 0,08


NOTE The nominal dimensions of the component compartment should be derived from the relevant component
specification. The tolerances on the nominal sizes of the compartment should be selected so that the components
cannot change their orientation within the tape and can be easily removed from the tape, with the following
characteristics.
There should be sufficient clearance surrounding the component so that
a) the component does not protrude above the top surface of the carrier tape,
b) the component can be removed from the cavity in a vertical direction without mechanical restriction after the top
cover tape has been removed,
c) the rotation of the component is limited to a 20° maximum tilt (see Figure 3, sketch A) and a 20° maximum
planar rotation (see Figure 3, sketch B),
d) the maximum lateral movement allowed is 0,20 mm except for 0603M sized components where the maximum
should be 0,12 mm and for 0402M sized components the maximum should be 0,10 mm.
For defined component positioning the cavity positions should be defined to an origin point. This origin is the
centre of the Index hole, defined by the crosshair of the dimensions E and P . The centre of the component
1 0
compartment is defined by P and F, relative to the sprocket holes, as shown in Figure 1, with tolerances given in
2
the table above.
Preferred dimensions for components should be taken from the relevant IEC specifications.
Dimensions A ≤ B
0 0, unless otherwise specified in the component detail specification.
Dimension K should comply with the component tilt in Sketch A.
0
The off-set between the centre of the component compartment and the centre of the sprocket hole should not be
more than 0,03 mm (see Figure 2).
a
Reference dimension.

3 Polarity and orientation of components in the tape
Requirements shall be in accordance with IEC 60286-3, 4.1, 4.2.1 and 4.2.3.
...