IEC 61400-25-3:2015
(Main)Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange models
Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange models
IEC 61400-25-3:2015 specifies an abstract communication service interface describing the information exchange between a client and a server for:
- data access and retrieval,
- device control,
- event reporting and logging,
- self-description of devices (device data dictionary),
- data typing and discovery of data types.
Main changes with respect to the previous edition consist of:
- harmonization with newer editions of IEC 61850 standards;
- reduction of overlap between standards and simplification by increased referencing, etc.
Eoliennes - Partie 25-3: Communications pour la surveillance et la commande des centrales éoliennes - Modèles d'échange d'information
L'IEC 61400-25-3:2015 spécifie une interface abstraite pour les services de communication qui décrit l'échange d'information entre un client et un serveur pour:
- l'accès et la récupération des données,
- la commande des dispositifs,
- les rapports et journalisations d'événements,
- l'autodescription des dispositifs (dictionnaire de données de dispositif),
- l'établissement de types de données et la découverte de types de données. Cette nouvelle édition comporte les changements importants suivants par rapport à l'édition précédente:
- l'harmonisation avec de nouvelles éditions de la série IEC 61850;
- la réduction de l'écart entre les normes et la simplification par un référencement amélioré, etc.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 61400-25-3 ®
Edition 2.0 2015-06
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Wind turbines –
Part 25-3: Communications for monitoring and control of wind power plants –
Information exchange models
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 61400-25-3 ®
Edition 2.0 2015-06
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Wind turbines –
Part 25-3: Communications for monitoring and control of wind power plants –
Information exchange models
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 27.180 ISBN 978-2-8322-2783-1
– 2 – IEC 61400-25-3:2015 RLV © IEC 2015
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 8
3 Terms and definitions . 8
4 Abbreviated terms . 12
5 General . 12
6 Information exchange models overview . 13
7 Operational functions . 15
7.1 General . 15
7.2 Association and authorisation model . 15
7.3 Control model . 16
7.3.1 General . 16
7.3.2 Direct control / Select before operate (SBO) . 17
7.3.3 Operate / TimeActivatedOperate . 17
7.3.4 Normal security / Enhanced security . 17
7.4 Monitoring, reporting and logging model . 18
8 Management functions . 20
8.1 General . 20
8.2 User management/access security model . 20
8.3 Setup model . 20
8.4 Time synchronisation model . 20
8.5 Diagnostic (self-monitoring) model . 20
9 The ACSI for wind power plant information models . 20
9.1 General . 20
9.2 Services of association and authorisation . 21
9.3 Services of Server class GenServerClass . 22
9.4 Services of Logical Device class GenLogicalDeviceClass . 22
9.5 Services of Logical Node class GenLogicalNodeClass . 22
9.6 Services of Data class GenDataObjectClass . 23
9.7 Services of DataSetClass . 23
9.8 Services of ReportControlBlockClass . 24
9.8.1 ACSI conformant services.
9.8.2 AddSubscription .
9.8.3 Remove Subscription .
9.9 Services of Log Control Block and Log classes LogControlBlockClass and
Log classes . 27
9.10 Services of control class ControlClass . 28
Annex A (informative) Examples of reporting and logging services . 29
A.1 Reporting example . 29
A.2 Logging example . 29
Annex B (normative) Relationship between ACSI services and functional constraints . 31
Annex C (informative) Relationship between ACSI defined in IEC 61850-7-2 and
IEC 61400-25-3 . 33
Annex D (normative) ACSI conformance statement . 35
D.1 General . 35
D.2 ACSI basic conformance statement . 35
D.3 ACSI models conformance statement . 35
D.4 ACSI service conformance statement . 37
Bibliography . 39
Figure 1 – Conceptual communication model of the IEC 61400-25 series . 8
Figure 2 – Association and authorisation model (conceptual) . 15
Figure 3 – Control model (conceptual) . 16
Figure 4 – Monitoring, reporting and logging model (conceptual) . 19
Figure 5 – Conceptual information exchange model for a wind power plant . 21
Figure 6 – Buffered report control block – conceptual . 25
Figure 7 – Log control block – conceptual . 28
Figure A.1 – Mapping of information models to data sets for reporting (example) . 29
Figure A.2 – Logging basics (example) . 30
Figure C.1 – Conceptual service model of the ACSI . 34
Table 1 – Information exchange models . 14
Table 2 – Comparison of the information retrieval methods . 19
Table 3 – Two-Party-Application-Association .
Table 4 – Server .
Table 5 – Logical Device .
Table 6 – Logical Node .
Table 7 – DATA .
Table 8 – DATA-SET .
Table 9 – REPORT-CONTROL .
Table 10 – AddSubscription service .
Table 11 – RemoveSubscription service .
Table 12 – LOG and LOG-CONTROL.
Table 13 3 – Data filter . 27
Table 14 – CONTROL . 26
Table B.1 – Relationship between ACSI Services and Functional Constraints . 31
Table D.1 – Basic conformance statement . 35
Table D.2 – ACSI models conformance statement. 36
Table D.3 – ACSI service conformance statement (1 of 2) . 37
Table D.4 – Time . 38
– 4 – IEC 61400-25-3:2015 RLV © IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
WIND TURBINES –
Part 25-3: Communications for monitoring
and control of wind power plants –
Information exchange models
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications
...
IEC 61400-25-3 ®
Edition 2.0 2015-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Wind turbines –
Part 25-3: Communications for monitoring and control of wind power plants –
Information exchange models
Eoliennes –
Partie 25-3: Communications pour la surveillance et la commande des centrales
éoliennes – Modèles d'échange d’information
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
15 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC Plus de 60 000 entrées terminologiques électrotechniques, en
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des
CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 61400-25-3 ®
Edition 2.0 2015-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Wind turbines –
Part 25-3: Communications for monitoring and control of wind power plants –
Information exchange models
Eoliennes –
Partie 25-3: Communications pour la surveillance et la commande des centrales
éoliennes – Modèles d'échange d’information
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.180 ISBN 978-2-8322-2722-0
– 2 – IEC 61400-25-3:2015 © IEC 2015
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references. 8
3 Terms and definitions . 8
4 Abbreviated terms . 9
5 General . 9
6 Information exchange models overview . 10
7 Operational functions . 12
7.1 General . 12
7.2 Association and authorisation model . 12
7.3 Control model . 13
7.3.1 General . 13
7.3.2 Direct control / Select before operate (SBO) . 14
7.3.3 Operate / TimeActivatedOperate . 14
7.3.4 Normal security / Enhanced security . 14
7.4 Monitoring, reporting and logging model . 14
8 Management functions . 16
8.1 General . 16
8.2 User management/access security model . 16
8.3 Setup model . 16
8.4 Time synchronisation model . 16
8.5 Diagnostic (self-monitoring) model . 16
9 The ACSI for wind power plant information models . 17
9.1 General . 17
9.2 Services of association and authorisation . 17
9.3 Services of GenServerClass . 18
9.4 Services of GenLogicalDeviceClass . 18
9.5 Services of GenLogicalNodeClass . 18
9.6 Services of GenDataObjectClass . 18
9.7 Services of DataSetClass . 19
9.8 Services of ReportControlBlockClass . 19
9.9 Services of LogControlBlockClass and LogClass . 20
9.10 Services of ControlClass . 21
Annex A (informative) Examples of reporting and logging services . 22
A.1 Reporting example . 22
A.2 Logging example . 22
Annex B (normative) Relationship between ACSI services and functional constraints . 24
Annex C (informative) Relationship between ACSI defined in IEC 61850-7-2 and
IEC 61400-25-3 . 26
Annex D (normative) ACSI conformance statement . 28
D.1 General . 28
D.2 ACSI basic conformance statement . 28
D.3 ACSI models conformance statement . 28
D.4 ACSI service conformance statement . 30
IEC 61400-25-3.2015 © IEC 2015 – 3 –
Bibliography . 32
Figure 1 – Conceptual communication model of the IEC 61400-25 series . 8
Figure 2 – Association and authorisation model (conceptual) . 12
Figure 3 – Control model (conceptual) . 13
Figure 4 – Monitoring, reporting and logging model (conceptual) . 15
Figure 5 – Conceptual information exchange model for a wind power plant . 17
Figure 6 – Buffered report control block – conceptual . 20
Figure 7 – Log control block – conceptual . 21
Figure A.1 – Mapping of information models to data sets for reporting (example) . 22
Figure A.2 – Logging basics (example) . 23
Figure C.1 – Conceptual service model of the ACSI . 27
Table 1 – Information exchange models . 11
Table 2 – Comparison of the information retrieval methods . 16
Table 3 – Data filter . 20
Table B.1 – Relationship between ACSI Services and Functional Constraints . 24
Table D.1 – Basic conformance statement . 28
Table D.2 – ACSI models conformance statement . 29
Table D.3 – ACSI service conformance statement (1 of 2) . 30
Table D.4 – Time . 31
– 4 – IEC 61400-25-3:2015 © IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
WIND TURBINES –
Part 25-3: Communications for monitoring
and control of wind power plants –
Information exchange models
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for st
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.