International Electrotechnical Vocabulary - Part 151: Electrical and magnetic devices

It has the status of a horizontal standard in accordance with IEC Guide 108.

Vocabulaire Electrotechnique International - Partie 151: Dispositifs électriques et magnétiques

Elle a le statut d'une norme horizontale conformément au Guide 108 de la CEI.

Mednarodni elektrotehniški slovar – Poglavje 151: Električne in magnetne naprave

General Information

Status
Not Published
Technical Committee
Current Stage
PPUB - Publication issued
Start Date
31-Jul-2001

Buy Standard

Standard
IEC 60050-151:2006
English and French language
166 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
IEC 60050-151:2000
English, French and Russian language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Amendment
IEC 60050-151:2000/A1:2000
English, French and Russian language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST IEC 60050-151:2006

STANDARD
september 2006
Mednarodni elektrotehniški slovar – Poglavje 151: Električne in magnetne
naprave
International Electrotechnical Vocabulary – Part 151: Electrical and magnetic
devices
ICS 01.040.29; 29.100.01 Referenčna številka
SIST IEC 60050-151:2006(en,fr)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

NORME CEI
INTERNATIONALE IEC
60050-151
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2001-07
Vocabulaire Electrotechnique International
Partie 151 :
Dispositifs électriques et magnétiques
International Electrotechnical Vocabulary
Part 151:
Electrical and magnetic devices
 IEC 2001 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photo-copie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
XB
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 2 ----------------------

– II – 60050-151  CEI:2001
SOMMAIRE
AVANT-PROPOS .IV
INTRODUCTION – Principes d’établissement et règles suivies .VI
1 Domaine d’application .XII
2 Références normatives .XII
3 Termes et définitions . 1
SECTION 151-11 – GÉNÉRALITÉS . 1
SECTION 151-12 – CONNEXIONS ET DISPOSITIFS DE CONNEXION . 11
SECTION 151-13 – DISPOSITIFS ÉLECTRIQUES PARTICULIERS . 28
SECTION 151-14 – DISPOSITIFS MAGNÉTIQUES PARTICULIERS . 58
SECTION 151-15 – FONCTIONNEMENT ET UTILISATION . 63
SECTION 151-16 – CONDITIONS DE FONCTIONNEMENT ET ESSAIS. 87
INDEX en français, anglais, chinois, allemand, espagnol, japonais, polonais,
portugais et suédois . 105

---------------------- Page: 3 ----------------------

60050-151  IEC:2001 – III –
CONTENTS
FOREWORD .V
INTRODUCTION – Principles and rules followed .VII
1 Scope .XIII
2 Normative references .XIII
3 Terms and definitions . 1
SECTION 151-11 – GENERAL . 1
SECTION 151-12 – CONNECTIONS AND CONNECTING DEVICES . 11
SECTION 151-13 – PARTICULAR ELECTRIC DEVICES. 28
SECTION 151-14 – PARTICULAR MAGNETIC DEVICES. 58
SECTION 151-15 – BEHAVIOUR AND USE . 63
SECTION 151-16 – OPERATING CONDITIONS AND TESTING . 87
INDEX in French, English, Chinese, German, Spanish, Japanese, Polish,
Portuguese and Swedish. 105

---------------------- Page: 4 ----------------------

– IV – 60050-151  CEI:2001
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
VOCABULAIRE ÉLECTROTECHNIQUE INTERNATIONAL
PARTIE 151 : DISPOSITIFS ÉLECTRIQUES ET MAGNÉTIQUES
AVANT-PROPOS
1) La CEI (Commission Électrotechnique Internationale) est une organisation mondiale de normalisation composée
de l'ensemble des comités électrotechniques nationaux (Comités nationaux de la CEI). La CEI a pour objet de
favoriser la coopération internationale pour toutes les questions de normalisation dans les domaines de
l'électricité et de l'électronique. A cet effet, la CEI, entre autres activités, publie des Normes internationales.
Leur élaboration est confiée à des comités d'études, aux travaux desquels tout Comité national intéressé par le
sujet traité peut participer. Les organisations internationales, gouvernementales et non gouvernementales, en
liaison avec la CEI, participent également aux travaux. La CEI collabore étroitement avec l'Organisation
Internationale de Normalisation (ISO), selon des conditions fixées par accord entre les deux organisations.
2) Les décisions ou accords officiels de la CEI concernant les questions techniques représentent, dans la mesure
du possible, un accord international sur les sujets étudiés, étant donné que les Comités nationaux intéressés
sont représentés dans chaque comité d’études.
3) Les documents produits se présentent sous la forme de recommandations internationales. Ils sont publiés
comme normes, spécifications techniques, rapports techniques ou guides et agréés comme tels par les Comités
nationaux.
4) Dans le but d'encourager l'unification internationale, les Comités nationaux de la CEI s'engagent à appliquer de
façon transparente, dans toute la mesure possible, les Normes internationales de la CEI dans leurs normes
nationales et régionales. Toute divergence entre la norme de la CEI et la norme nationale ou régionale
correspondante doit être indiquée en termes clairs dans cette dernière.
5) La CEI n’a fixé aucune procédure concernant le marquage comme indication d’approbation et sa responsabilité
n’est pas engagée quand un matériel est déclaré conforme à l’une de ses normes.
6) L’attention est attirée sur le fait que certains des éléments de la présente Norme internationale peuvent faire
l’objet de droits de propriété intellectuelle ou de droits analogues. La CEI ne saurait être tenue pour
responsable de ne pas avoir identifié de tels droits de propriété et de ne pas avoir signalé leur existence
La Norme internationale CEI 60050-151 a été établie par le groupe de travail 100, du comité
d'études 1 de la CEI : Terminologie.
Cette deuxième édition annule et remplace la première édition parue en 1978.
Le texte de cette norme est issu des documents suivants :
FDIS Rapport de vote
1/1829/FDIS 1/1834/RVD
Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant
abouti à l'approbation de cette norme.
Dans la présente partie du VEI les termes et définitions sont donnés en français et en anglais :
de plus, les termes sont indiqués en chinois (cn), allemand (de), espagnol (es), japonais (ja),
polonais (pl), portugais (pt) et suédois (sv).
Cette publication a été rédigée selon les Directives ISO/CEI, Partie 3.
Le comité a décidé que le contenu de cette publication ne sera pas modifié avant 2006. A cette
date, la publication sera
• reconduite;
• supprimée;
• remplacée par une édition révisée, ou
• amendée.

---------------------- Page: 5 ----------------------

60050-151  IEC:2001 – V –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INTERNATIONAL ELECTROTECHNICAL VOCABULARY
PART 151: ELECTRICAL AND MAGNETIC DEVICES
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60050-151 has been prepared by the Working Group 100, of IEC
technical committee 1: Terminology.
This second edition cancels and replaces the first edition published in 1978.
The text of this standard is based on the following documents:
FDIS Report on voting
1/1829/FDIS 1/1834/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
In this part of IEV, the terms and definitions are written in French and English; in addition the
terms are given in Chinese (cn), German (de), Spanish (es), Japanese (ja), Polish (pl),
Portuguese (pt) and Swedish (sv).
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.
The committee has decided that the contents of this publication will remain unchanged until 2006.
At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 6 ----------------------

– VI – 60050-151  CEI:2001
INTRODUCTION
Principes d’établissement et règles suivies
Généralités
Le VEI (série de normes CEI 60050) est un vocabulaire multilingue à usage général couvrant le
champ de l’électrotechnique, de l’électronique et des télécommunications. Il comprend environ
18 500 articles terminologiques correspondant chacun à une notion. Ces articles sont répartis
dans environ 80 parties, chacune correspondant à un domaine donné.
Exemples :
Partie 161 (CEI 60050-161) : Compatibilité électromagnétique
Partie 411 (CEI 60050-411) : Machines tournantes
Les articles suivent un schéma de classification hiérarchique Partie/Section/ Notion, les notions
étant, au sein des sections, classées par ordre systématique.
Les termes, définitions et notes des articles sont donnés dans les trois langues de la CEI,
c’est-à-dire français, anglais et russe (langues principales du VEI).
Dans chaque article, les termes seuls sont également donnés dans les langues additionnelles
du VEI (arabe, chinois, allemand, grec, espagnol, italien, japonais, polonais, portugais et
suédois).
De plus, chaque partie comprend un index alphabétique des termes inclus dans cette partie,
et ce pour chacune des langues du VEI.
NOTE – Certaines langues peuvent manquer.
Constitution d’un article terminologique
Chacun des articles correspond à une notion, et comprend :
– un numéro d’article,
– éventuellement un symbole littéral de grandeur ou d’unité,
puis, pour chaque langue principale du VEI :
– le terme désignant la notion, appelé « terme privilégié », éventuellement accompagné de
synonymes et d’abréviations,
–la définition de la notion,
– éventuellement la source,
– éventuellement des notes,
et enfin, pour les langues additionnelles du VEI, les termes seuls.
Numéro d’article
Le numéro d’article comprend trois éléments, séparés par des traits d’union :
– Numéro de partie : 3 chiffres,
– Numéro de section : 2 chiffres,
– Numéro de la notion : 2 chiffres (01 à 99).
Exemple : 151-13-82

---------------------- Page: 7 ----------------------

60050-151  IEC:2001 – VII –
INTRODUCTION
Principles and rules followed
General
The IEV (IEC 60050 series) is a general-purpose multilingual vocabulary covering the field of
electrotechnology, electronics and telecommunication. It comprises about 18 500 termino-
logical entries, each corresponding to a concept. These entries are distributed among about
80 parts, each part corresponding to a given field.
Examples:
Part 161 (IEC 60050-161): Electromagnetic compatibility
Part 411 (IEC 60050-411): Rotating machines
The entries follow a hierarchical classification scheme Part/Section/Concept, the concepts
being, within the sections, organized in a systematic order.
The terms, definitions and notes in the entries are given in the three IEC languages, that is
French, English and Russian (principal IEV languages).
In each entry the terms alone are also given in the additional IEV languages (Arabic, Chinese,
German, Greek, Spanish, Italian, Japanese, Polish, Portuguese and Swedish).
In addition, each part comprises an alphabetical index of the terms included in that part, for
each of the IEV languages.
NOTE – Some languages may be missing.
Organization of a terminological entry
Each of the entries corresponds to a concept, and comprises:
– an entry number,
– possibly a letter symbol for quantity or unit,
then, for each of the principal IEV languages:
– the term designating the concept, called "preferred term", possibly accompanied by
synonyms and abbreviations,
– the definition of the concept,
– possibly the source,
– possibly notes,
and finally, for the additional IEV languages, the terms alone.
Entry number
The entry number is comprised of three elements, separated by hyphens:
– Part number: 3 digits,
– Section number: 2 digits,
– Concept number: 2 digits (01 to 99).
Example: 151-13-82

---------------------- Page: 8 ----------------------

– VIII – 60050-151  CEI:2001
Symboles littéraux de grandeurs et unités
Ces symboles, indépendants de la langue, sont donnés sur une ligne séparée suivant le
numéro d’article.
Exemple :
131-11-22
(symb. : R)
résistance, f
Terme privilégié et synonymes
Le terme privilégié est le terme qui figure en tête d’un article ; il peut être suivi de synonymes.
Il est imprimé en gras.
Synonymes :
Les synonymes sont imprimés sur des lignes séparées sous le terme privilégié : ils sont égale-
ment imprimés en gras, sauf les synonymes déconseillés, qui sont imprimés en maigre,
et suivis par l’attribut « (déconseillé) ».
Parties pouvant être omises :
Certaines parties d’un terme peuvent être omises, soit dans le domaine considéré, soit dans un
contexte approprié. Ces parties sont alors imprimées en gras, entre parenthèses :
Exemple: émission (électromagnétique)
Absence de terme approprié :
Lorsqu’il n’existe pas de terme approprié dans une langue, le terme privilégié est remplacé par
cinq points, comme ceci :
.....
« » (et il n’y a alors bien entendu pas de synonymes).
Attributs
Chaque terme (ou synonyme) peut être suivi d’attributs donnant des informations supplé-
mentaires ; ces attributs sont imprimés en maigre, à la suite de ce terme, et sur la même ligne.
Exemples d’attributs :
– spécificité d’utilisation du terme :
rang (d’un harmonique)
– variante nationale :
unité de traitement CA
– catégorie grammaticale :
électronique, adj
électronique, f
– abréviation : CEM (abréviation)
– déconseillé : déplacement (terme déconseillé)

---------------------- Page: 9 ----------------------

60050-151  IEC:2001 – IX –
Letter symbols for quantities and units
These symbols, which are language independent, are given on a separate line following the
entry number.
Example:
131-11-22
(symb. : R)
resistor
Preferred term and synonyms
The preferred term is the term that heads a terminological entry; it may be followed by
synonyms. It is printed in boldface.
Synonyms:
The synonyms are printed on separate lines under the preferred term: they are also printed in
boldface, excepted for deprecated synonyms, which are printed in lightface, and followed by
the attribute "(deprecated)".
Parts that may be omitted:
Some parts of a term may be omitted, either in the field under consideration or in an
appropriate context. Such parts are printed in boldface type, and placed in parentheses:
Example: (electromagnetic) emission
Absence of an appropriate term:
When no adequate term exists in a given language, the preferred term is replaced by five dots,
.....
like this: " " (and there are of course no synonyms).
Attributes
Each term (or synonym) may be followed by attributes giving additional information, and printed
on the same line as the corresponding term, following this term.
Examples of attributes:
– specific use of the term:
transmission line (in electric power systems)
– national variant: lift GB
– grammatical information:
thermoplastic, noun
AC, qualifier
– abbreviation: EMC (abbreviation)
– deprecated: choke (deprecated)

---------------------- Page: 10 ----------------------

– X – 60050-151  CEI:2001
Source
Dans certains cas il a été nécessaire d’inclure dans une partie du VEI une notion prise dans
une autre partie du VEI, ou dans un autre document de terminologie faisant autorité
(VIM, ISO/CEI 2382, etc.), dans les deux cas avec ou sans modification de la définition
(ou éventuellement du terme).
Ceci est indiqué par la mention de cette source, imprimée en maigre, et placée entre crochets
à la fin de la définition :
Exemple : [131-03-13 MOD]
(MOD indique que la définition a été modifiée)
Termes dans les langues additionnelles du VEI
Ces termes sont placés à la fin de l’article, sur des lignes séparées (une ligne par langue),
précédés par le code alpha-2 de la langue, défini dans l’ISO 639, et dans l’ordre alphabétique
de ce code. Les synonymes sont séparés par des points-virgules.

---------------------- Page: 11 ----------------------

60050-151  IEC:2001 – XI –
Source
In some cases, it has been necessary to include in an IEV part a concept taken from another
IEV part, or from another authoritative terminology document (VIM, ISO/IEC 2382, etc.), in both
cases with or without modification to the definition (and possibly to the term).
This is indicated by the mention of this source, printed in lightface, and placed between square
brackets at the end of the definition.
Example: [131-03-13 MOD]
(MOD indicates that the definition has been modified)
Terms in additional IEV languages
These terms are placed at the end of the entry, on separate lines (one single line for each
language), preceded by the alpha-2 code for the language defined in ISO 639, and in the
alphabetic order of this code. Synonyms are separated by semicolons.

---------------------- Page: 12 ----------------------

– XII – 60050-151  CEI:2001
VOCABULAIRE ÉLECTROTECHNIQUE INTERNATIONAL
PARTIE 151 : DISPOSITIFS ÉLECTRIQUES ET MAGNÉTIQUES
1 Domaine d’application
Cette partie de la norme CEI 60050 donne la terminologie générale utilisée dans les divers
domaines de l’électrotechnique (par exemple « électricité », « magnétisme », « électronique »,
« dispositif », « composant », etc.), ainsi que des termes généraux relatifs aux connexions et
dispositifs de connexion, des termes relatifs à des dispositifs électriques et magnétiques d’usage
général tels que résistances, relais, transformateurs, et des termes relatifs au fonctionnement,
à l’utilisation, aux essais et aux conditions de fonctionnement de ces dispositifs.
Cette terminologie est naturellement en accord avec la terminologie figurant dans les autres
parties spécialisée du VEI.
2 Références normatives
Les documents normatifs suivants contiennent des dispositions qui, par suite de la référence
qui y est faite, constituent des dispositions valables pour la présente Norme internationale.
Pour les références datées, les amendements ultérieurs ou les révisions de ces publications ne
s’appliquent pas. Toutefois, les parties prenantes aux accords fondés sur la présente Norme
internationale sont invitées à rechercher la possibilité d'appliquer les éditions les plus récentes
des documents normatifs indiqués ci-après. Pour les références non datées, la dernière édition
du document normatif en référence s’applique. Les membres de la CEI et de l'ISO possèdent
le registre des Normes internationales en vigueur.
CEI 60027-1:1992, Symboles littéraux à utiliser en électrotechnique – Partie 1 : Généralités
+ Amendement 1:1997
CEI 60050-101:1998, Vocabulaire Électrotechnique International – Partie 101 : Mathématiques
CEI 60050-111:1996, Vocabulaire Électrotechnique International – Partie 111 : Physique et chimie
CEI 60050-121:1998, Vocabulaire Électrotechnique International – Partie 121 : Électromagnétisme
1)
CEI 60050-131:1978, Vocabulaire Électrotechnique International – Partie 131 : Théorie des circuits
CEI 60050-191:1990, Vocabulaire Électrotechnique International – Partie 191 : Sûreté de fonction-
nement et qualité de service
+ Amendement 1:1999
CEI 60050-195:1998, Vocabulaire Électrotechnique International – Partie 195 : Mise à la terre
et protection contre les chocs électriques
+ Amendement 1:2000
CEI 60050-212:1990, Vocabulaire Électrotechnique International – Partie 212 : Isolants solides,
liquides et gazeux
CEI 60050-221:1990, Vocabulaire Électrotechnique International – Partie 221 : Matériaux et compo-
sants magnétiques
+ Amendement 1:1993 + Amendement 2:1999
CEI 60050-351:1998, Vocabulaire Électrotechnique International – Partie 351 : Commande et
régulation automatiques
CEI 60050-411:1996, Vocabulaire Électrotechnique International – Partie 411 : Machines tournantes
__________
1)
En cours de révision.

---------------------- Page: 13 ----------------------

60050-151  IEC:2001 – XIII –
INTERNATIONAL ELECTROTECHNICAL VOCABULARY
PART 151: ELECTRIC AND MAGNETIC DEVICES
1 Scope
This part of IEC 60050 gives the general terminology used in the various fields of electro-
technology (e.g. "electricity", "magnetism", "electronics", "device", "component", etc.), general
terms pertaining to connections and connecting devices, terms pertaining to general purpose
electric and magnetic devices such as resistors, transformers, relays etc., and terms related to
the behaviour, the use, the tests and the operating conditions of these devices.
This terminology is of course consistent with the terminology developed in the other specialized
parts of the IEV.
2 Normative references
The following normative documents contain provisions which, through reference in this text,
constitute provisions of this International Standard. For dated references, subsequent
amendments to, or revisions of, any of these publications do not apply. However, parties to
agreements based on this International Standard are encouraged to investigate the possibility
of applying the most recent editions of the normative documents indicated below. For undated
references, the latest edition of the normative document referred to applies. Members of IEC
and ISO maintain registers of currently valid International Standards.
IEC 60027-1:1992, Letter symbols to be used in electrical technology – Part 1: General
+ Amendment 1:1997
IEC 60050-101:1998, International Electrotechnical Vocabulary – Part 101: Mathematics
IEC 60050-111:1996, International Electrotechnical Vocabulary – Part 111: Physics and chemistry
IEC 60050-121:1998, International Electrotechnical Vocabulary – Part 121: Electromagnetism
1)
IEC 60050-131:1978, International Electrotechnical Vocabulary – Part 131: Circuit theory
IEC 60050-191:1990, International Electrotechnical Vocabulary – Part 191: Dependability and
quality of service
+ Amendment 1:1999
IEC 60050-195:1998, International Electrotechnical Vocabulary – Part 195: Earthing and pro-
tection against electric shock
+ Amendment 1:2000
IEC 60050-212:1990, International Electrotechnical Vocabulary – Part 212: Insulating solids,
liquids and gases
IEC 60050-221:1990, International Electrotechnical Vocabulary – Part 221: Magnetic materials
and components
+ Amendment 1:1993 + Amendment 2:1999
IEC 60050-351:1998, International Electrotechnical Vocabulary – Part 351: Automatic control
IEC 60050-411:1996, International Electrotechnical Vocabulary – Part 411: Rotating machines
__________
1)
Under revision.

---------------------- Page: 14 ----------------------

– XIV – 60050-151  CEI:2001
CEI 60050-441:1984, Vocabulaire Électrotechnique International – Partie 441 : Appareillage et
fusibles
+ Amendement 1:2000
CEI 60050-461:1984, Vocabulaire Électrotechnique International – Partie 461 : Câbles électriques
+ Amendement 1:1993
CEI 60050-466:1990, Vocabulaire Électrotechnique International – Partie 466 : Lignes électriques
CEI 60050-486:1991, Vocabulaire Électrotechnique International – Partie 486 : Éléments et
batteries d'accumulateurs
CEI 60050-521:1984, Vocabulaire Électrotechnique International – Partie 521 : Dispositifs à semi-
1)
conducteurs et circuits intégrés
CEI 60050-531:1974, Vocabulaire Électrotechnique International – Partie 531 : Tubes électroniques
CEI 60050-551:1998, Vocabulaire Électrotechnique International – Partie 551 : Électronique de
puissance
CEI 60050-581:1978, Vocabulaire Électrotechnique International – Partie 581 : Composants électro-
mécaniques pour équipements électriques
+ Amendement 1:1998
CEI 60050-601:1985, Vocabulaire Électrotechnique International – Partie 601 : Production,
transport et distribution de l'énergie électrique – Généralités
+ Amendement 1:1998
CEI 60050-702:1992, Vocabulaire Électrotechnique International – Partie 702 : Oscillations,
signaux et dispositifs associés
CEI 60050-704:1993, Vocabulaire Électrotechnique International – Partie 704 : Transmission
CEI 60050-713:1998, Vocabulaire Électrotechnique International – Partie 713 : Radiocommuni-
cations : émetteurs, récepteurs, réseaux et exploitation
CEI 60050-726:1982, Vocabulaire Électrotechnique International – Partie 726 : Lignes de trans-
mission et guides d'ondes
CEI 60050-731:1991, Vocabulaire Électrotechnique International – Partie 731 : Télécommuni-
cations par fibres optiques
CEI 60050-801:1994, Vocabulaire Électrotechnique International – Partie 801 : Acoustique et
électroacoustique
CEI 60050-811:1991, Vocabulaire Électrotechnique International – Partie 811 : Traction électrique
CEI 60050-841:1983, Vocabulaire Électrotechnique International – Partie 841 : Électrothermie
industrielle
CEI 60050-891:1998, Vocabulaire Électrotechnique International – Partie 891 : Électrobiologie
CEI 60417-1:2000, Symboles graphiques utilisables sur le matériel – Vue d'ensemble et
application
CEI 61293:1994, Marquage des matériels électriques avec des caractéristiques assignées
relatives à l'alimentation électrique – Prescriptions de sécurité
ISO 31-0:1992, Grandeurs et unités – Partie 0 : Principes généraux
ISO 3534-1:1993 – Statistique – Vocabulaire et symboles – Partie 1 : Probabilités et termes
statistiques généraux
ISO/CEI Guide 2:1996, Normalisation et activités connexes – Vocabulaire général
__________
1)
En cours de révision.

---------------------- Page: 15 ----------------------

60050-151  IEC:2001 – XV –
IEC 60050-441:1984, International Electrotechnical Vocabulary – Part 441: Switchgear,
controlgear and fuses
+ Amendment 1:2000
IEC 60050-461:1984, International Electrotechnical Vocabulary – Part 461: Electric cables
+ Amendment 1:1993
IEC 60050-466:1990, International Electrotechnical Vocabulary – Part 466: Overhead lines
IEC 60050-486:1991, International Electrotechnical Vocabulary – Part 486: Secondary cells
and batteries
IEC 60050-521:1984, International Electrotechnical Vocabulary – Part 521: Semiconductor
1)
devices and integrated circuits
IEC 60050-531:1974, International Electrotechnical Vocabulary – Part 531: Electronic tubes
IEC 60050-551:1998, International Electrotechnical Vocabulary – Part 551: Power electronics
IEC 60050-581:1978, International Electrotechnical Vocabulary – Part 581: Electromechanical
components for electronic equipment
+ Amendment 1:1998
IEC 60050-601:1985, International Electrotechnical Vocabulary – Part
...

SLOVENSKI STANDARD
SIST IEC 60050-151:200
01-DSULO
0HGQDURGQLHOHNWURWHKQLãNLVORYDU±3RJODYMH(OHNWULþQHLQPDJQHWQHQDSUDYH
International Electrotechnical Vocabulary - Part 151: Electrical and magnetic devices
Vocabulaire Electrotechnique International - Partie 151: Dispositifs électriques et
magnétiques
Ta slovenski standard je istoveten z: IEC 60050-151
ICS:
01.040.29 Elektrotehnika (Slovarji) Electrical engineering
(Vocabularies)
29.100.01 6HVWDYQLGHOL]DHOHNWULþQH Components for electrical
QDSUDYHQDVSORãQR equipment in general
SIST IEC 60050-151:200 en,frUX
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST IEC 60050-151:2006

---------------------- Page: 2 ----------------------

SIST IEC 60050-151:2006

---------------------- Page: 3 ----------------------

SIST IEC 60050-151:2006

---------------------- Page: 4 ----------------------

SIST IEC 60050-151:2006

---------------------- Page: 5 ----------------------

SIST IEC 60050-151:2006

---------------------- Page: 6 ----------------------

SIST IEC 60050-151:2006

---------------------- Page: 7 ----------------------

SIST IEC 60050-151:2006

---------------------- Page: 8 ----------------------

SIST IEC 60050-151:2006

---------------------- Page: 9 ----------------------

SIST IEC 60050-151:2006

---------------------- Page: 10 ----------------------

SIST IEC 60050-151:2006

---------------------- Page: 11 ----------------------

SIST IEC 60050-151:2006

---------------------- Page: 12 ----------------------

SIST I
...

SLOVENSKI STANDARD
SIST IEC 60050-151:$
01DSULO
0HGQDURGQLHOHNWURWHKQLãNLVORYDU±3RJODYMH(OHNWULþQHLQPDJQHWQHQDSUDYH
International Electrotechnical Vocabulary - Part 151: Electrical and magnetic devices
Vocabulaire Electrotechnique International - Partie 151: Dispositifs électriques et
magnétiques
Ta slovenski standard je istoveten z: IEC 60050-151$
ICS:
01.040.29 Elektrotehnika (Slovarji) Electrical engineering
(Vocabularies)
29.100.01 6HVWDYQLGHOL]DHOHNWULþQH Compon
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.