ISO/IEC 30147:2021
(Main)Internet of Things (IoT) - Integration of IoT trustworthiness activities in ISO/IEC/IEEE 15288 system engineering processes
Internet of Things (IoT) - Integration of IoT trustworthiness activities in ISO/IEC/IEEE 15288 system engineering processes
ISO/IEC 30147:2021(E) provides system life cycle processes to implement and maintain trustworthiness in an IoT system or service by applying and supplementing ISO/IEC/IEEE 15288:2015. The system life cycle processes are applicable to IoT systems and services common to a wide range of application areas.
General Information
Standards Content (Sample)
ISO/IEC 30147
Edition 1.0 2021-05
INTERNATIONAL
STANDARD
Internet of things (IoT) – Integration of IoT trustworthiness activities in
ISO/IEC/IEEE 15288 system engineering processes
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about
ISO/IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address
below or your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
ISO/IEC 30147
Edition 1.0 2021-05
INTERNATIONAL
STANDARD
Internet of things (IoT) – Integration of IoT trustworthiness activities in
ISO/IEC/IEEE 15288 system engineering processes
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 35.020; 35.030 ISBN 978-2-8322-9808-4
– 2 – ISO/IEC 30147:2021 © ISO/IEC 2021
CONTENTS
FOREWORD . 4
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Abbreviated terms . 9
5 IoT systems/services and IoT trustworthiness . 9
5.1 Characteristics specific to IoT systems and services . 9
5.2 IoT trustworthiness . 11
6 Processes for realizing IoT trustworthiness . 12
6.1 General . 12
6.2 Agreement processes . 12
6.2.1 Acquisition process . 12
6.2.2 Supply process . 13
6.3 Organizational project-enabling processes . 13
6.3.1 Life cycle model management process . 13
6.3.2 Infrastructure management process . 13
6.3.3 Portfolio management process . 13
6.3.4 Human resource management process . 13
6.3.5 Quality management process . 13
6.3.6 Knowledge management process . 14
6.4 Technical management processes . 14
6.4.1 Project planning process . 14
6.4.2 Project assessment and control process . 14
6.4.3 Decision management process . 15
6.4.4 Risk management process . 15
6.4.5 Configuration management process . 16
6.4.6 Information management process . 16
6.4.7 Measurement process . 16
6.4.8 Quality assurance process . 17
6.5 Technical processes . 17
6.5.1 Business or mission analysis process . 17
6.5.2 Stakeholder needs and requirements definition process . 17
6.5.3 System requirements definition process . 18
6.5.4 Architecture definition process . 19
6.5.5 Design definition process . 19
6.5.6 System analysis process . 20
6.5.7 Implementation process . 20
6.5.8 Integration process . 20
6.5.9 Verification process . 21
6.5.10 Transition process . 22
6.5.11 Validation process . 22
6.5.12 Operation process . 23
6.5.13 Maintenance process . 24
6.5.14 Disposal process . 24
Annex A (informative) Examples of risks specific to IoT systems . 25
A.1 General . 25
A.2 Example 1: Security risk . 25
A.3 Example 2: Reliability risk . 25
A.4 Example 3: Safety risk . 25
A.5 Example 4: Privacy risk . 26
A.6 Example 5: Resilience risk . 26
A.7 Example 6: Risk arising from interconnected IoT trustworthiness factors . 26
Annex B (informative) Overview of process and its application . 27
B.1 Overview of approach toward process for IoT trustworthiness . 27
B.2 Application of process to enhance IoT trustworthiness . 29
Bibliography . 30
Figure 1 – An IoT system, a system of systems . 10
Table B.1 – Relations between typical characteristics of IoT systems and process
bases . 29
– 4 – ISO/IEC 30147:2021 © ISO/IEC 2021
INTERNET OF THINGS (IoT) –
INTEGRATION OF IoT TRUSTWORTHINESS ACTIVITIES
IN ISO/IEC/IEEE 15288 SYSTEM ENGINEERING PROCESSES
FOREWORD
1) ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental,
in liaison with ISO and IEC, also take part in the work.
2) The formal decisions or agreements of IEC and ISO on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested IEC and ISO National bodies.
3) IEC and ISO documents have the form of recommendations for international use and are accepted by IEC and
ISO National bodies in that sense. While all reasonable efforts are made to ensure that the technical content of
IEC and ISO documents is accurate, IEC and ISO cannot be held responsible for the way in which they are
used or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC and ISO National bodies undertake to apply IEC and
ISO documents transparently to the maximum extent possible in their national and regional publications. Any
divergence between any IEC and ISO document and the corresponding national or regional publication shall be
clearly indicated in the latter.
5) IEC and ISO do not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC and ISO marks of conformity. IEC and ISO are not
responsible for any services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this document.
7) No liability shall attach to IEC and ISO or their directors, employees, servants or agents including individual
experts and members of its technical committees and IEC and ISO National bodies for any personal injury,
property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including
legal fees) and expenses arising out of the publication, use of, or reliance upon, this ISO/IEC document or any
other IEC and ISO documents.
8) Attention is drawn to the Normative references cited in this document. Use of the referenced publications is
indispensable for the correct application of this document.
9) Attention is drawn to the possibility that some of the elements of this ISO/IEC document may be the subject of
patent rights. IEC and ISO shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 30147 has been prepared by subcommittee 41: Internet of Things and related
technologies, of ISO/IEC joint technical committee 1: Information technology. It is an
International Standard.
The text of this International Standard is based on the following documents:
FDIS Report on voting
JTC1-SC41/210/FDIS JTC1-SC41/221/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and
developed in accordance with ISO/IEC Directives, Part 1, available at
www.iec.ch/members_experts/refdocs and www.iso.org/directives.
INTRODUCTION
In the Internet of Things (IoT), all IoT devices are mutually connected to each other and this is
expected to bring new advantages to daily life. On the other hand, traditional system
management devices (thermostats, lighting systems, traffic lights, etc.) which were not
previously connected to the Internet are now being connected without regard to the level of
IoT trustworthiness required by the system-of-interest. Many of these devices are being
connected without the benefit of security controls and processes in place for servers, PCs,
and smartphones. Flaws or failures in these devices caused by lack of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.