Spatial wireless power transfer based on multiple magnetic resonances - Part 1: Requirements

IEC 63245-1:2021 specifies requirements for spatial wireless power transfer based on multiple magnetic resonances (SWPT-MMR), which is a non-radiative wireless power transfer (WPT). This document contains two categories of requirements: general requirements and functional requirements. The general requirements cover charging procedures and charging zones. The functional requirements cover each component of a SWPT-MMR system, such as transmitter coils.

Transfert d'énergie sans fil dans l'espace reposant sur des résonances magnétiques multiples - Partie 1: Exigences

L'IEC 63245-1:2021 spécifie les exigences relatives au transfert d’énergie sans fil dans l’espace reposant sur des résonances magnétiques multiples (SWPT-MMR), qui est un mode de transfert d’énergie sans fil (WPT) non radiatif. Le présent document contient deux catégories d’exigences: les exigences générales et les exigences fonctionnelles. Les exigences générales couvrent les procédures de charge et la zone de charge. Les exigences fonctionnelles couvrent chaque composant d’un système SWPT-MMR (les bobines de transmission, par exemple).

General Information

Status
Published
Publication Date
08-Mar-2021
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
19-Mar-2021
Completion Date
09-Mar-2021
Ref Project

Buy Standard

Standard
IEC 63245-1:2021 - Spatial wireless power transfer based on multiple magnetic resonances - Part 1: Requirements
English and French language
32 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 63245-1 ®
Edition 1.0 2021-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Spatial wireless power transfer based on multiple magnetic resonances –
Part 1: Requirements
Transfert d’énergie sans fil dans l’espace reposant sur des résonances
magnétiques multiples –
Partie 1: Exigences
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - IEC online collection - oc.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 000 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
16 langues additionnelles. Egalement appelé Vocabulaire

Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 63245-1 ®
Edition 1.0 2021-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Spatial wireless power transfer based on multiple magnetic resonances –

Part 1: Requirements
Transfert d’énergie sans fil dans l’espace reposant sur des résonances

magnétiques multiples –
Partie 1: Exigences
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.240.99; 35.200 ISBN 978-2-8322-9470-3

– 2 – IEC 63245-1:2021 © IEC 2021
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, and abbreviated terms . 6
3.1 Terms and definitions . 6
3.2 Abbreviated terms . 7
4 Overview of spatial wireless power transfer . 7
5 General requirements . 9
5.1 Requirements on charging zone . 9
5.1.1 Three-dimensional charging zone . 9
5.1.2 Quiet zone . 9
5.1.3 Null point . 10
5.2 Requirements on charging procedure . 11
6 Functional requirements . 12
6.1 Requirements on transmitter coils . 12
6.1.1 Multiple transmitter coils . 12
6.1.2 Location of transmitter coils . 13
6.1.3 Relationship between two transmitter coils . 13
6.1.4 Structure of connecting a pair of transmitter coils . 13
6.2 Requirements on operations related to current . 14
6.2.1 Supplying current. 14
6.2.2 Controlling phase of current . 14
6.3 Requirements on frequency . 15
6.3.1 Adjusting resonance frequency . 15
Bibliography . 16

Figure 1 – Conceptual image of SWPT [IEC 62827-3] . 8
Figure 2 – Conceptual image of SWPT-MMR . 8
Figure 3 – Free positioning of a receiver in a charging zone . 9
Figure 4 – Interaction between transmitter coils for generating a quiet zone . 9
Figure 5 – Interaction between transmitter coils for generating a quiet zone (top view) . 10
Figure 6 – Null points in a charging zone (top view) . 10
Figure 7 – Addressing null points by using two pairs of transmitter coils (top view) . 11
Figure 8 – Basic charging procedure of SWPT-MMR . 12
Figure 9 – Arrangement of transmitter coils . 13
Figure 10 – Example of transmitter coils and a power supplier in an SWPT-MMR
system . 14

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SPATIAL WIRELESS POWER TRANSFER
BASED ON MULTIPLE MAGNETIC RESONANCES –

Part 1: Requirements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 63245-1 has been prepared by technical area 15: Wireless power
transfer, of IEC technical committee 100: Audio, video and multimedia systems and equipment.
The text of this International Standard is based on the following documents:
FDIS Report on voting
100/3548/FDIS 100/3564/RVD
Full information on the voting for the approval of this International Standard can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 63245 series, published under the general title Spatial wireless
power transfer based on multiple magnetic resonances, can be found on the IEC website.

– 4 – IEC 63245-1:2021 © IEC 2021
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.