IEC 61160:2005

Design review

This International Standard makes recommendations for the implementation of design review as a means of verifying that the design input requirements have been met and stimulating the improvement of the product's design. The intention is for it to be applied during the design and development phase of a product's life cycle.

Revue de conception

La présente Norme internationale donne des recommandations pour la mise en uvre de la revue de conception comme moyen de vérifier que les exigences de la conception sont respectées et stimuler l'amélioration de la conception du produit. Son but est d'être appliquée pendant la phase de conception et de développement du cycle de vie d'un produit.

General Information

• Status: Published
• Publication Date: 26-Sep-2005
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 03.100.40 - Research and development
• ICS: 03.120.01 - Quality in general
• Technical Committee: TC 56 - Dependability
• Current Stage: PPUB - Publication issued
• Start Date: 31-Dec-2005
• Completion Date: 27-Sep-2005

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD 61160
Second edition
2005-09
Design review
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the

60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.

Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,

edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the

base publication incorporating amendment 1 and the base publication incorporating

amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:

Email: [e-mail]
Tel: [phone]
Fax: [phone]
INTERNATIONAL IEC
STANDARD 61160
Second edition
2005-09
Design review
 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale V
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 61160  IEC:2005(E)
CONTENTS
FOREWORD.3

INTRODUCTION.5

1 Scope.6

1.1 General .6

1.2 Application .7

1.3 Types of application .7

2 Normative references .8

3 Terms and definitions .8
4 Management of the design review process .9
4.1 General recommendations.9
4.2 Documentation requirements.9
5 Management responsibility .10
5.1 Top management .10
5.2 Design manager .10
5.3 Management review .10
6 Design review process.10
6.1 General .10
6.2 Planning for the design review.13
6.3 Design review personnel .13
6.4 Preparation of input package.15
6.5 Meeting notification and agenda .16
6.6 Conduct of meeting .16
6.7 Design review minutes .18
6.8 Actions and recommendations.18
6.9 Follow-up and completion of action items and recommendations .19

Annex A (informative) Example of design stages and type of design review .20
Annex B (informative)  Example of objectives for design review at different stages of
a design’s development .21
Annex C (informative) Example of design review panel attributes .23
Annex D (informative) Example of design review meeting topics .24
Annex E (informative) Example of team member responsibilities.26
Annex F (informative) Example design review checklists questions.27

Bibliography.33

Figure 1 – Design and development process.6
Figure 2 – Design review process .11

Table A.1 – Example of design stages and type of design review.20
Table E.1 – Examples of responsibilities.26

61160  IEC:2005(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
DESIGN REVIEW
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
This International Standard has been prepared by IEC technical committee 56: Dependability.
This second edition cancels and replaces the first edition published in 1992 and its
amendment 1(1994) and constitutes a technical revision.

The major changes with regard to the previous edition concerns the inclusion of the previous
amendment which dealt with environmental effects (10.2.7), human factors (19.2.9) and legal
matters (10.2.10), as well as clarification of responsibilities for the design review process and
the design review process itself.
The text of this standard is based on the following documents:
FDIS Report on voting
56/1044/FDIS 56/1064/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

– 4 – 61160  IEC:2005(E)
The committee has decided that the contents of this publication will remain unchanged until

the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in

the data related to the specific publication. At this date, the publication will be

• reconfirmed,
• withdrawn,
• replaced by a revised edition, or

• amended.
A bilingual version of this publication may be issued at a later date.

61160  IEC:2005(E) – 5 –
INTRODUCTION
The dependability of a product is enhanced through implementation of necessary disciplines

during the design and development phases of a product’s life cycle. Like other technical and

engineering disciplines, a design review needs to be properly managed in order to achieve its

objectives.
Properly implemented, design reviews enhance the potential for delivering a product of the

required dependability, quality, performance, safety and potential for reduction in costs and

delivery schedule. Both supplier and customer can utilize it.

A design review is an advisory activity. It is intended primarily to provide verification of the
work of the design development team, and to provide recommendations, where possible, to
improve the product or process and its realization. Thus design reviews should be considered
as a confirmation and refining procedure and not a creative one.
Design reviews, regardless of frequency or depth cannot replace good product definitions,
design specifications, and management of the design and development process. Used as a
control process, design reviews can provide the necessary verification of the successful
outcome of the design effort at a given time.
Design reviews should not be confused with day-to-day management of a design project. The
design manager carries the responsibility for the design and the final decisions for the
response to a design review’s actions and recommendations. Design reviews when properly
conducted, increase confidence that design and development activities were carried out with
due regard to all pertinent requirements for a product throughout its life cycle.
The application of this standard needs to be tailored to the needs of the design and
development project or task in question and the organization preparing the design.

– 6 – 61160  IEC:2005(E)
DESIGN REVIEW
1 Scope
1.1 General
This International Standard makes recommendations for the implementation of design review

as a means of verifying that the design input requirements have been met and stimulating the

improvement of the product’s design. The intention is for it to be applied during the design
and development phase of a product’s life cycle.
It provides guidelines for planning and conducting a design review and specific details
concerning contributions by specialists in reliability, maintenance, maintenance support and
availability.
The process for design and development is outlined in Figure 1 and requirements for
management of the design and development process overall are given in ISO 9001:2000. The
stages at whic
...

IEC 61160
Edition 2.0 2005-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Design review
Revue de conception
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 61160
Edition 2.0 2005-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Design review
Revue de conception
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
V
CODE PRIX
ICS 03.120.01; 03.100.40 ISBN 2-8318-8512-4
– 2 – 61160 © CEI:2005
SOMMAIRE
AVANT-PROPOS.4
INTRODUCTION.8

1 Domaine d'application .10
1.1 Généralités.10
1.2 Application .12
1.3 Types d’application .12
2 Références normatives.14
3 Termes et définitions .14
4 Gestion du processus de revue de conception.16
4.1 Recommandations générales .16
4.2 Exigences de documentation.18
5 Responsabilité de gestion.18
5.1 Direction générale .18
5.2 Responsable de la conception.18
5.3 Revue de direction .18
6 Processus de revue de conception .18
6.1 Généralités.18
6.2 Planning de la revue de conception .24
6.3 Personnel de la revue de conception.24
6.4 Préparation des données d’entrée .30
6.5 Notification de réunion et ordre du jour.30
6.6 Conduite des réunions.32
6.7 Compte rendu de la revue de conception.36
6.8 Actions et recommandations.38
6.9 Suivi et accomplissement des actions proposées et recommandations .38

Annexe A (informative) Exemple d’étapes de conception et de type de revue de
conception .40
Annexe B (informative)  Exemple d’objectifs pour revue de conception à différentes
étapes d’un développement de conception.42
Annexe C (informative) Exemples de qualités requises pour une équipe de revue de
conception .46
Annexe D (informative) Exemple de qualité requise pour une équipe de revue de
conception .48
Annexe E (informative) Exemple des responsabilités d’un membre de l’équipe .52
Annexe F (informative) Exemple de questions sur les listes des revues de conception .54

Bibliographie.68

Figure 1 – Procédé de conception et développement .10
Figure 2 – Processus de revue de conception.22

Tableau A.1 – Exemple d’étapes de conception et de type de revue de conception .40
Tableau E.1 – Exemples de responsabilités .52

61160 © IEC:2005 – 3 –
CONTENTS
FOREWORD.5
INTRODUCTION.9

1 Scope.11
1.1 General .11
1.2 Application .13
1.3 Types of application .13
2 Normative references .15
3 Terms and definitions .15
4 Management of the design review process .17
4.1 General recommendations.17
4.2 Documentation requirements.19
5 Management responsibility .19
5.1 Top management .19
5.2 Design manager .19
5.3 Management review .19
6 Design review process.19
6.1 General .19
6.2 Planning for the design review.25
6.3 Design review personnel .25
6.4 Preparation of input package.31
6.5 Meeting notification and agenda .31
6.6 Conduct of meeting .33
6.7 Design review minutes .37
6.8 Actions and recommendations.39
6.9 Follow-up and completion of action items and recommendations .39

Annex A (informative) Example of design stages and type of design review .41
Annex B (informative)  Example of objectives for design review at different stages of
a design’s development .43
Annex C (informative) Example of design review panel attributes .47
Annex D (informative) Example of design review meeting topics .49
Annex E (informative) Example of team member responsibilities.53
Annex F (informative) Example design review checklists questions.55

Bibliography.69

Figure 1 – Design and development process.11
Figure 2 – Design review process .23

Table A.1 – Example of design stages and type of design review.41
Table E.1 – Examples of responsibilities.53

– 4 – 61160 © CEI:2005
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
___________
REVUE DE CONCEPTION
AVANT-PROPOS
1) La Commission Electrotechnique Internationale (CEI) est une organisation mondiale de normalisation
composée de l'ensemble des comités électrotechniques nationaux (Comités nationaux de la CEI). La CEI a
pour objet de favoriser la coopération internationale pour toutes les questions de normalisation dans les
domaines de l'électricité et de l'électronique. A cet effet, la CEI – entre autres activités – publie des Norm
...