ISO 13784-1:2014

Reaction to fire test for sandwich panel building systems — Part 1: Small room test

ISO 13784-1:2014 specifies a method of test for determining the reaction to fire behaviour of sandwich panel building systems, and the resulting flame spread on or within the sandwich panel building construction, when exposed to heat from a simulated internal fire with flames impinging directly on the internal corner of the sandwich panel building construction. The test method described is applicable to free-standing, self-supporting, and frame-supported sandwich panel systems. ISO 13784-1:2014 is not intended to apply to sandwich panel products which are glued, nailed, bonded, or similarly supported by an underlying wall or ceiling construction. For products used as internal linings, the ISO 9705 test method should be used. ISO 13784-1:2014 provides for small room testing of sandwich panel building systems. For large-room testing of sandwich panel building systems, ISO 13784-2:2014 should be used. This method is not intended to evaluate the fire resistance of a product, which should be tested by other means.

Essais de réaction au feu des systèmes de fabrication de panneaux de type sandwich — Partie 1: Essais pour des chambres de petite taille

General Information

• Status: Published
• Publication Date: 02-Feb-2014
• ICS: 13.220.50 - Fire-resistance of building materials and elements
• Technical Committee: ISO/TC 92/SC 1 - Fire initiation and growth
• Drafting Committee: ISO/TC 92/SC 1/WG 7 - Large and intermediate scale fire test methods
• Current Stage: 9093 - International Standard confirmed

Relations

• Revises: ISO 13784-1:2002 - Reaction-to-fire tests for sandwich panel building systems — Part 1: Test method for small rooms
• Effective Date: 28-Feb-2009

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 13784-1
Second edition
2014-02-01
Reaction to fire test for sandwich
panel building systems —
Part 1:
Small room test
Essais de réaction au feu des systèmes de fabrication de panneaux de
type sandwich —
Partie 1: Essais pour des chambres de petite taille
Reference number
ISO 13784-1:2014(E)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 13784-1:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 13784-1:2014(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Principle . 2
5 Types of systems . 3
5.1 General . 3
6 Test specimen . 3
7 Test method . 4
8 Ignition source . 9
9 Instrumentation .11
9.1 Thermocouples .11
9.2 Heat flux meter .11
9.3 Additional equipment .11
9.4 Heat and smoke release measurement .11
10 Test procedure .16
10.1 Initial conditions .
...