Lifts for the transport of persons and goods — Part 20: Global essential safety requirements (GESRs)

This document — specifies GESRs for lifts (elevators), their components and functions, and — establishes a system and provides methods for minimizing safety risks that can arise in the course of, the operation and use of, or work on, lifts (elevators). NOTE 1 Hereinafter, the term "lift" is used instead of the term "elevator". NOTE 2 See Clause 5 regarding the use and application of this document. This document is applicable to lifts that are intended to carry persons or persons and goods that can: a) be located in any permanent and fixed structure or building, except lifts located in means of transport, (e.g. ships); b) have any rated load, size of load carrying unit and speed, and travel distance and number of landings; c) be affected by fire in the load-carrying unit (LCU), earthquake, weather, or flood; d) be foreseeably misused (e.g. overloaded) but not vandalized. This document does not cover a) all needs of users with disabilities;[1] or b) risks arising from work on lifts under construction, testing, or during alterations and dismantling; use of lifts for fire fighting and emergency evacuation; vandalism; and fire outside the LCU. [1] Although the GESRs specified in this document have been identified and evaluated by risk assessment, not all disabilities or combinations of such disabilities of users have necessarily been addressed.

Elévateurs pour le transport de personnes et d'objets — Partie 20: Exigences essentielles de sécurité globale

General Information

Status
Published
Publication Date
23-Jul-2018
Current Stage
9093 - International Standard confirmed
Completion Date
19-Jan-2024
Ref Project

Relations

Buy Standard

Standard
ISO 8100-20:2018 - Lifts for the transport of persons and goods
English language
139 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 8100-20
First edition
2018-08
Lifts for the transport of persons and
goods —
Part 20:
Global essential safety requirements
(GESRs)
Elévateurs pour le transport de personnes et d'objets —
Partie 20: Exigences essentielles de sécurité globale
Reference number
ISO 8100-20:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 8100-20:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8100-20:2018(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
4 Approach and methodology. 6
4.1 Background . 6
4.2 Approach . 6
4.3 Methodology . 6
5 Understanding and implementing GESRs . 8
5.1 Overall objective . 8
5.2 Use of GESRs. 9
5.2.1 Basis . 9
5.2.2 Ways of using GESRs . 9
5.2.3 Applicability of GESRs .10
5.2.4 Safety objectives of GESRs .10
5.2.5 Verification of compliance .11
5.3 Use of this document .11
5.3.1 Users .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.