ISO 4223-1:2026
(Main)Tyre industry — Vocabulary — Part 1: Pneumatic tyres
- Abstract
This document defines terms related to pneumatic tyres, i. e. tyres suitable for containing a gas at a pressure which can be adjusted. This document specifies the corresponding codes, symbols and values for these tyres. NOTE For other terms used in this field and their equivalents in other languages, see ISO 3877 (all parts). For terms and definitions relating to wheels and rims, see ISO 3911.
- Status
- Published
- Publication Date
- 19-Nov-2026
- Technical Committee
- ISO/TC 31 - Tyres, rims and valves
- Drafting Committee
- ISO/TC 31 - Tyres, rims and valves
- Current Stage
- 6060 - International Standard published
- Start Date
- 20-Nov-2026
- Completion Date
- 20-Nov-2026
ISO 4223-1:2026 is an International Standard from ISO for the vocabulary of pneumatic tyres. It defines terms, codes, symbols and values used to describe tyres that contain gas at adjustable pressure, so manufacturers, testers, and specifiers use the same language for tyre type, size, service description and test-related terms.
What does ISO 4223-1:2026 specify?
ISO 4223-1:2026 specifies the terms used for pneumatic tyres and the codes, symbols and values associated with them. It is a vocabulary document, so its main role is to standardize language and notation rather than to set a product performance test program.
ISO 4223-1:2026 is organized into three main clauses and one normative annex:
- Clause 1 defines the scope.
- Clause 2 lists the normative references.
- Clause 3 groups terms and symbols by topic, from use category through design, dimensions, designation, testing and general tyre terms.
- Annex A gives the load, speed and rim-diameter data used in tyre designation and calculation.
The document is limited to pneumatic tyres. For other terms used in the field, it points users to ISO 3877 (all parts), and for wheels and rims it points to ISO 3911.
What are the key requirements of ISO 4223-1:2026?
ISO 4223-1:2026 requires users to apply the defined vocabulary and symbols consistently when describing pneumatic tyres. In practice, that means the document governs how tyres are classified, marked, measured and referred to in technical documents.
1) Use the document’s shared terminology framework
Clause 3 states that the terms, definitions and symbols in ISO 3911 and ISO 18805 apply, together with the terms defined here. This matters because tyre descriptions often rely on linked rim and classification terminology, not just tyre wording alone.
2) Classify tyres by intended use
Clause 3.1 defines categories such as normal tyre, special use tyre, snow tyre, severe snow use tyre, temporary-use spare tyre, not for highway service tyre (NHS), traction tyre and professional off-road tyre (POR). These terms matter because they tell users where a tyre is intended to operate and how it should be marked and selected.
Special cases are also defined:
- ice grip tyre is a passenger car snow tyre classified as a severe snow use tyre and designed for use on ice
- T-type temporary-use spare tyre is identified by the T prefix
- NHS tyres are mainly for use outside public roads
For a buyer or engineer, these distinctions affect fitment, legal use and the expected operating environment.
3) Use service description as the formal size-and-capability code
Clause 3.2 defines service description as the tyre identification added to the tyre size designation. It consists of one or two load indices (LI) and a speed symbol (SS), and when two load indices are used they indicate single and dual fitment capacity.
This matters in practice because the service description is the clearest way to state how much load a tyre can carry and how fast it can run under defined conditions. The additional service description is also defined: it is a secondary marking placed in a circle near the main service description, used for special operating conditions.
4) Distinguish the main structural types
Clause 3.3 defines diagonal, bias-belted and radial structures, plus the extended radial structure. These definitions matter because tyre construction affects fitment, performance and how the tyre is designated.
The standard also defines the associated tyre forms:
- diagonal tyre
- bias-belted tyre
- radial tyre
- extended radial structure tyre
In use, this tells a specifier what kind of carcass and belt arrangement the tyre has.
5) Apply the standardized component and dimension terms
Clause 3.4 defines the main tyre parts: bead, sidewall, tread, carcass, inner liner, belt, breaker, lower sidewall, tread groove, tread wear indicator and chafer. Clause 3.5 then defines the core dimensions used for fitment and calculation, including section width, overall width, section height, overall diameter, nominal aspect ratio, nominal rim diameter and specified rim diameter.
This matters because tyre drawings, purchase specs and fit checks depend on these exact measurement terms. For example, section width excludes markings and protectors, while overall width includes them. Clause 3.5.7 adds that the dynamic maximum overall tyre diameter in service applies only to motorcycle tyres and includes allowance for centrifugal growth.
6) Follow the approved designation symbols
Clause 3.6 defines how tyre size designation is built and lists many additional tyre designations. The document specifies the symbols for structure in the size marking, such as -, D, B, R and RF, and a long list of service and application tags such as P, IN, IMP, LT, CP, NHS, AT, DH, VA, ST, IF, VF, TR, ML, MH, HC, DT, TG, K, SL, FI, SS, M/C, HL, ERS, ET, MPT, POR and FRT.
These markings matter because they are the standardized shorthand used on tyres, in catalogues and in technical ordering. Correct use avoids mix-ups between passenger, industrial, agricultural, motorcycle, truck and special-use tyres.
7) Use the testing vocabulary consistently
Clause 3.7 defines terms used in tyre testing, including test rim, measuring rim, test pressure, capped inflation, regulated inflation, grip index and several separation or damage terms such as bead separation, belt separation and tread separation. It also defines abrasion-related terms, including mass loss and abrasion level.
This is important for laboratory work and conformity assessment because the same tyre may be described differently depending on whether the context is dimensional measurement, endurance testing or wear assessment.
8) Use the general terms exactly as defined
Clause 3.8 defines practical operating terms such as cold inflation pressure, rolling circumference, rolling resistance, rolling resistance coefficient, tyre contact area, tyre ground pressure, retread tyre, reinforced tyre, run flat tyre, extended mobility tyre (EMT) and regroovable tyre.
These definitions matter because they support specification, comparison and performance reporting. For example, run flat tyre and EMT are linked to endurance testing in ISO 16992, and severe snow use tyre is linked to performance testing using ISO 18106.
What terms does ISO 4223-1:2026 define?
ISO 4223-1:2026 defines many terms, but these are especially important:
- Service description - The identification added to tyre size designation, made up of load index and speed symbol, so the tyre’s load and speed capability is stated in a standard form.
- Load index (LI) - A numerical code that points to a reference load and is used to define tyre load-carrying capacity.
- Speed symbol (SS) - An alpha or alphanumeric code that identifies the tyre’s speed category.
- Severe snow use tyre - A tyre designed from performance testing and identified by the Alpine or 3 Peak Mountain Snow Flake (3PMSF) symbol.
- Cold inflation pressure - The tyre pressure at ambient temperature before use-related pressure build-up.
- Rolling resistance - The energy loss per unit distance travelled, conventionally expressed as force.
- Run flat tyre - A tyre designed to run a specified distance under prescribed conditions after loss of air.
- Extended mobility tyre (EMT) - A radial tyre designed for similar after-deflation running capability.
Who uses ISO 4223-1:2026?
ISO 4223-1:2026 is used by people who design, specify, mark, test and buy pneumatic tyres. That includes tyre manufacturers, rim and wheel engineers, testing laboratories, certification teams, quality managers and technical buyers.
It is especially useful in the tyre industry, but also in vehicle and equipment sectors that depend on accurate tyre size designation, load and speed ratings, and standardized test language. For day-to-day work, it helps teams write clear specifications, interpret tyre markings, compare tyres correctly and avoid using different terms for the same feature.
What changed in ISO 4223-1:2026 from the previous edition?
ISO 4223-1:2026 cancels and replaces ISO 4223-1:2017. The document states that this sixth edition has been technically revised.
The changes named in the foreword are:
- inclusion of terms that are new to the tyre industry
- revision of references
Which standards are used with ISO 4223-1:2026?
ISO 4223-1:2026 refers users to these standards and related documents:
- ISO 3911 - Provides vocabulary, designation and marking for wheels and rims for pneumatic tyres.
- ISO 16992 - Supports the definitions of run flat tyre and extended mobility tyre through endurance testing.
- ISO 18805 - Provides tyre classification terms for agricultural, forestry and construction machines.
- ISO 19447 - Gives the method for measuring ice grip performance for loaded new tyres.
- ISO 3877 (all parts) - Is cited in the scope note for other terms used in the field and their equivalents in other languages.
- ISO 18106 - Is cited in the definition of severe snow use tyre as the performance test method basis for that designation.
What does the ISO 4223-1:2026 document contain?
ISO 4223-1:2026 contains a structured vocabulary for pneumatic tyres, with terms grouped by use category, service description, structure, main components, dimensions, designation, tyre testing and general technical concepts. It also includes symbols and designation elements used on tyre markings and in technical descriptions.
Figure 3 supports the dimensional terms, while Figures 1 and 2 show the ice grip symbol and the 3 Peak Mountain Snow Flake (3PMSF) symbol. Annex A contains the tabulated load indices, speed symbols, nominal rim diameters and specified rim diameters used in sizing and fitment calculations.
The annex is practical rather than descriptive: it provides the reference data that makes the terminology usable in design documents, ordering information, test reporting and interchangeability checks.
Relations
- Revises
ISO 4223-1:2017 - Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres - Effective Date
- 24-Jun-2023
Get Certified
Connect with accredited certification bodies for this standard
DIN CERTCO
DIN Group product certification.

Smithers Quality Assessments
US management systems and product certification.
Sponsored listings
Frequently Asked Questions
ISO 4223-1:2026 is a standard published by the International Organization for Standardization (ISO). Its full title is "Tyre industry — Vocabulary — Part 1: Pneumatic tyres". This standard covers: This document defines terms related to pneumatic tyres, i. e. tyres suitable for containing a gas at a pressure which can be adjusted. This document specifies the corresponding codes, symbols and values for these tyres. NOTE For other terms used in this field and their equivalents in other languages, see ISO 3877 (all parts). For terms and definitions relating to wheels and rims, see ISO 3911.
This document defines terms related to pneumatic tyres, i. e. tyres suitable for containing a gas at a pressure which can be adjusted. This document specifies the corresponding codes, symbols and values for these tyres. NOTE For other terms used in this field and their equivalents in other languages, see ISO 3877 (all parts). For terms and definitions relating to wheels and rims, see ISO 3911.
ISO 4223-1:2026 is classified under the following ICS (International Classification for Standards) categories: 01.040.83 - Rubber and plastics industries (Vocabularies); 83.160.01 - Tyres in general. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 4223-1:2026 has the following relationships with other standards: It is inter standard links to ISO 4223-1:2017. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 4223-1:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
International
Standard
ISO 4223-1
Sixth edition
Tyre industry — Vocabulary —
2026-11
Part 1:
Pneumatic tyres
Industrie du pneumatique — Vocabulaire —
Partie 1: Pneumatiques
Reference number
© ISO 2026
All rights reserved.
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
an ISO member body, or an authorized third-party distributor.
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
photocopying, scanning, recording, or posting on internal or external digital platforms.
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and symbols . 1
3.1 Terms relating to category of use .1
3.2 Terms relating to service description .3
3.3 Terms relating to structure .4
3.4 Terms relating to main components .5
3.5 Terms relating to dimensions (see Figure 3) .6
3.6 Terms, definitions and symbols of designation .8
3.7 Terms relating to tyre testing .11
3.8 Other general terms and definitions . 13
Annex A (normative) Loads, speeds and rim diameters .16
Bibliography .28
iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 31, Tyres, rims and valves.
This sixth edition cancels and replaces the fifth edition (ISO 4223-1:2017), which has been technically
revised.
The main changes are as follows:
— inclusion of terms that are new to the tyre industry;
— revision of references.
A list of all parts in the ISO 4223 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
International Standard ISO 4223-1:2026(en)
Tyre industry — Vocabulary —
Part 1:
Pneumatic tyres
1 Scope
This document defines terms related to pneumatic tyres, i. e. tyres suitable for containing a gas at a pressure
which can be adjusted.
This document specifies the corresponding codes, symbols and values for these tyres.
NOTE For other terms used in this field and their equivalents in other languages, see ISO 3877 (all parts). For
terms and definitions relating to wheels and rims, see ISO 3911.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 3911, Wheels and rims for pneumatic tyres — Vocabulary, designation and marking
ISO 16992, Passenger car tyres — Spare unit substitutive equipment (SUSE)
ISO 18805, Tyre classification — Agricultural, forestry and construction machines
ISO 19447, Passenger car tyres — Method for measuring ice grip performance — Loaded new tyres
3 Terms, definitions and symbols
For the purposes of this document, the terms, definitions and symbols given in ISO 3911 and ISO 18805 and
the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at https:// www .electropedia .org/
— ISO Online browsing platform: available at https:// www .iso .org/ obp
3.1 Terms relating to category of use
3.1.1
normal tyre
tyre intended for use on public streets, roads and highways and that are not marked with “M+S” (or other
variations) or severe snow or special use tyre (3.1.2) designations
3.1.2
special use tyre
tyre intended for mixed use both on- and off-road or for other special duty and primarily designed to initiate
and control vehicle motion in off-road conditions
Note 1 to entry: Examples of special use tyre designations are ET (3.6.1.1.29), MPT (3.6.1.1.30), ML (3.6.1.1.16), and
POR (3.6.1.1.31).
3.1.2.1
professional off-road tyre
POR tyre
special use tyre (3.1.2) primarily used for service in severe off-road conditions
3.1.3
snow tyre
mud and snow tyre
tyre whose tread (3.4.4) pattern, tread compound or structure (3.3.1) is primarily designed to achieve either
on snow or on mud or on sand, or both conditions a performance better than that of a normal tyre (3.1.1)
with regard to its ability to initiate or control vehicle motion
Note 1 to entry: It is identified by a combination of the letters “M” and “S”, e. g. M+S, M&S, M.S.
3.1.3.1
ice grip tyre
passenger car snow tyre (3.1.3) that is classified as a severe snow use tyre (3.1.4) and additionally designed to
be used on road surfaces covered with ice
Note 1 to entry: An ice grip tyre shall conform to ISO 19447.
[3]
Note 2 to entry: An ice grip tyre that conforms to UN Regulation No. 117 shall be marked with the ice grip symbol
(see Figure 1):
Figure 1 — Ice grip symbol (ISO 7000-3964)
3.1.4
severe snow use tyre
tyre for use in severe snow conditions
tyre whose tread (3.4.4) pattern, tread compound or structure (3.3.1) is specifically designed based on
performance testing using ISO 18106 and which is identified by an “Alpine” or “3 Peak Mountain Snow Flake
(3PMSF)” symbol
Note 1 to entry: Regional standards and regulatory requirements can apply for dimensions and performance criteria
for severe snow use tyres as well as for the placement of the 3 peak mountain snow flake (3PMSF) symbol (see
Figure 2).
Figure 2 — 3 peak mountain snow flake (3PMSF) symbol
3.1.5
temporary-use spare tyre
tyre different from a tyre intended to be fitted to any vehicle for normal driving conditions but intended
only for temporary use under restricted driving conditions
3.1.5.1
T-type temporary-use spare tyre
temporary-use spare tyre (3.1.5) designed for use at an inflation pressure higher than those established for
standard and reinforced tyres (3.8.11)
Note 1 to entry: It is designated with the “T” prefix.
3.1.6
not for highway service tyre
NHS tyre
tyre primarily designed for use outside of public roads, but suitable for temporary or incidental use on public
roads and identified with the letters “NHS” (3.6.1.1.8)
EXAMPLE Earth-mover, industrial, agricultural equipment and motorcycles tyres can be not for highway service
tyres.
Note 1 to entry: Motorcycle tyres that are marked with “NHS” shall not be used on public roads.
3.1.7
traction tyre
tyre intended to be fitted primarily to the drive axle(s) of a vehicle to maximize force
transmission in various circumstances
Note 1 to entry: Traction tyres can be marked with “TRACTION”.
3.2 Terms relating to service description
3.2.1
service description
tyre identification, in addition to the tyre size designation (3.6.1), which consists of one or two load indices
(LI) (3.2.1.1) and a speed symbol (SS) (3.2.1.2)
Note 1 to entry: When two load indices are used, these indicate the load carrying capacity in single and dual fitment.
EXAMPLE 91H or 121/119S.
3.2.1.1
load index
LI
numerical code which indicates a reference load used to define the load carrying capacity of the tyre, which
can depend on operating conditions and tyre type
Note 1 to entry: The standardized load indices and the assigned reference loads are specified in Table A.1.
3.2.1.2
speed symbol
SS
alpha or alpha-numeric code which indicates the speed category (3.2.1.3) of the tyre, which can depend on
operating conditions and tyre type
Note 1 to entry: The standardized speed symbols are specified in Table A.2.
3.2.1.3
speed category
maximum speed which the tyre can sustain, expressed by the speed symbol, and which is part of the service
description (3.2.1)
Note 1 to entry: The speed categories assigned to the standardized speed symbols are specified in Table A.2.
3.2.1.4
additional service description
secondary service description identifying a special type of service at which the tyre is allowed to operate in
addition to the main service description
Note 1 to entry: The additional service description shall be marked within a circle and shall be located close to the
main service description.
Note 2 to entry: The additional service description shall consist of either one or two load indices (3.2.1.1) that are
greater than, and a speed symbol that indicates a speed category that is less than, that of the main service description
or one or two load indices that are lower than or equal to and a speed symbol that indicates a speed category that is
greater than that of the main service description.
3.3 Terms relating to structure
3.3.1
structure
technical characteristics of the tyre’s structure
3.3.1.1
diagonal structure
bias-ply structure
cross-ply structure
structure (3.3.1) in which the ply cords (3.4.5) that extend to the beads (3.4.1) are laid at alternate angles of
substantially less than 90° to the centreline of the tread (3.4.4)
3.3.1.1.1
diagonal tyre
tyre having a diagonal structure (3.3.1.1)
3.3.1.2
bias-belted structure
structure (3.3.1) in which the ply cords (3.4.5) that extend to the beads (3.4.1) are laid at alternate angles
of substantially less than 90° to the centreline of the tread (3.4.4) and are restricted by a belt (3.4.10)
comprising one or more layers of substantially inextensible cord (3.4.5) material
3.3.1.2.1
bias-belted tyre
tyre having a bias-belted structure (3.3.1.2)
3.3.1.3
radial structure
structure (3.3.1) in which the ply cords (3.4.5) that extend to the beads (3.4.1) are laid at substantially 90° to
the centreline of the tread (3.4.4) in a zone including most of the sidewall (3.4.2) and located outside the bead
(3.4.1) and the essentially inextensible circumferential belt (3.4.10) that stabilizes the carcass (3.4.8)
3.3.1.3.1
radial tyre
tyre having a radial structure (3.3.1.3)
3.3.1.3.2
extended radial structure
radial structure (3.3.1.3) in which the ply cords (3.4.5) that extend to the beads (3.4.1) are not laid
substantially at 90° to the centre line of the tread (3.4.4) across the complete cross section of the tyre
3.4 Terms relating to main components
3.4.1
bead
part of the tyre shaped to fit the rim (3.7.12) and having a core made of one or several essentially inextensible
strands with the plies (3.4.6) wrapped around the core
3.4.2
sidewall
portion of the tyre between the tread (3.4.4) and the bead (3.4.1)
3.4.3
sidewall rubber
rubber layer on the sidewall (3.4.2) of the tyre and over the carcass (3.4.8), which can include ornamental or
protective ribs, tyre labelling and markings, and moulded fitting lines
3.4.3.1
rim protector
feature incorporated into the lowersidewall (3.4.11) area of the tyre which is intended to protect the rim
(3.7.12) flange from damage
3.4.4
tread
part of a tyre which comes into contact with the ground
3.4.5
cord
textile or non-textile strands (threads) used in various components of the tyre carcass (3.4.8)
EXAMPLE Plies (3.4.6), belts (3.4.10), breakers (3.4.9).
3.4.6
ply
layer of rubber-coated parallel cords (3.4.5)
3.4.7
inner liner
layer of rubber on the inside of the carcass (3.4.8) used especially in tubeless tyres to minimize air loss
3.4.8
carcass
part of a tyre other than the tread (3.4.4) and the sidewall rubber (3.4.3) which, when inflated, bears the load
3.4.9
breaker
intermediate ply (3.4.6) not extending to the bead (3.4.1)
3.4.10
belt
bracing ply
layer of material underneath the tread (3.4.4), laid substantially in the direction of the tread centreline, that
restricts the carcass (3.4.8) circumferentially
3.4.11
lower sidewall
area below the line of maximum section width (3.5.1) of the tyre, visible when the tyre, fitted to a rim (3.7.12),
is viewed from the side
3.4.12
tread groove
space between the adjacent ribs or blocks in the tread (3.4.4) pattern
3.4.13
tread wear indicator
projection within the tread grooves (3.4.12) designed to give a visual indication of the degree of wear of the
tread (3.4.4)
3.4.14
chafer
material in the bead (3.4.1) area to protect the carcass (3.4.8) against rim (3.7.12) chafing
3.5 Terms relating to dimensions (see Figure 3)
a
Specified rim width.
Figure 3 — Dimensions
3.5.1
section width
S
linear distance between the outside of the sidewalls (3.4.2) of an inflated pneumatic tyre, when fitted on a
measuring rim (3.7.10), excluding elevations due to labelling (markings), decorations, protective bands or
ribs, or rim protector (3.4.3.1)
3.5.2
overall width
W
linear distance between the outside of the sidewalls (3.4.2) of an inflated pneumatic tyre, when fitted on a
measuring rim (3.7.10), including labelling (marking), decoration, protective bands or ribs, and rim protector
(3.4.3.1), and in the case of tyres where the tread (3.4.4) is wider than the section width (3.5.1), the overall
width corresponds to the tread width
3.5.3
maximum overall tyre width in service
overall width (3.5.2) plus
a) manufacturing tolerances; and
b) tolerance for service growth
3.5.4
section height
H
half the difference between the overall diameter (3.5.5) and the nominal rim diameter (3.5.9)
3.5.5
overall diameter
D
o
diameter of an inflated pneumatic tyre, when fitted on a measuring rim (3.7.10), at the outermost surface of
the tread (3.4.4), applying to new tyres (3.8.3) or newly retreaded tyres (3.8.9)
3.5.6
static maximum overall tyre diameter in service
D
os
overall diameter (3.5.5) plus
a) manufacturing tolerances; and
b) tolerance for service growth
3.5.7
dynamic maximum overall tyre diameter in service
D
od
overall diameter (3.5.5) plus
a) manufacturing tolerances;
b) tolerance for service growth; and
c) allowance for dimensional changes due to centrifugal force
Note 1 to entry: This definition applies only to motorcycle tyres; the allowance in 3.5.7 c) shall be taken into account
when designing for tyre clearances.
3.5.8
nominal aspect ratio
H/S
ratio of the tyre [on its theoretical rim (3.7.12)] nominal section height (3.5.4) to the nominal section width
(3.5.10) multiplied by 100
3.5.9
nominal rim diameter
D
r
conventional number corresponding to the diameter of the rim (3.7.12) expressed either as a size code
(number less than 100) or in millimetres (number greater than 100), but not as both
Note 1 to entry: See Table A.3 for the nominal rim diameters, expressed in millimetres, that shall apply to nominal rim
diameters expressed by codes.
3.5.10
nominal section width
S
N
section width (3.5.1) indicated in the tyre size designation (3.6.1), and used for calculation of tyre dimensions
Note 1 to entry: Regional tyre standards have used “SN”.
3.5.11
specified rim diameter
diameter of the intersection of the axial projections of the bead seat and the flange of a rim (3.7.12)
Note 1 to entry: The specified rim diameters recommended to be used for nominal rim diameters (3.5.9) expressed by
codes are specified in Table A.4.
Note 2 to entry: Bead seat and flange are defined in ISO 3911.
3.6 Terms, definitions and symbols of designation
3.6.1
tyre size designation
designation showing:
— the nominal section width (3.5.10);
— the nominal aspect ratio (3.5.8);
— indication of the structure (3.3.1) placed in front of the nominal rim diameter (3.5.9) marking, as follows:
— for diagonal tyres (3.3.1.1.1): the symbol “-” or the letter “D”;
— for bias-belted tyres (3.3.1.2.1): the letter “B”;
— for radial tyres (3.3.1.3.1): the letter “R”;
— for run flat tyres (3.8.12): the letters “RF”;
— a conventional number denoting the nominal rim diameter (3.5.9) and corresponding to its diameter
expressed either by codes (numbers below 100) or in millimetres (numbers above 100)
Note 1 to entry: Additional indications, letters, groups of letters and numbers can be part of the tyre size designation
depending on the intended use of the tyre.
EXAMPLE 165/80R15, 24.00-25 NHS.
3.6.1.1
additional tyre designation
additional lett
...



