Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in vertical configuration — Amendment 1

Essais de réaction au feu — Propagation du feu — Partie 2: Propagation latérale sur les produits de bâtiment et de transport en position verticale — Amendement 1

[Not translated]

General Information

Status
Published
Publication Date
24-Oct-2011
Current Stage
6060 - International Standard published
Due Date
15-Apr-2012
Completion Date
25-Oct-2011

Relations

Buy Standard

Standard
ISO 5658-2:2006/Amd 1:2011
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 5658-2:2006/Amd 1:2011
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 5658-2
Second edition
2006-09-15
AMENDMENT 1
2011-11-01


Reaction to fire tests — Spread of
flame —
Part 2:
Lateral spread on building and transport
products in vertical configuration
AMENDMENT 1
Essais de réaction au feu — Propagation du feu —
Partie 2: Propagation latérale sur les produits de bâtiment et de
transport en position verticale
AMENDEMENT 1




Reference number
ISO 5658-2:2006/Amd.1:2011(E)
©
ISO 2011

---------------------- Page: 1 ----------------------
ISO 5658-2:2006/Amd.1:2011(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2011 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 5658-2:2006/Amd.1:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 5658-2:2006 was prepared by Technical Committee ISO/TC 92, Fire safety,
Subcommittee SC 1, Fire initiation and growth.

© ISO 2011 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 5658-2:2006/Amd.1:2011(E)
Reaction to fire tests — Spread of flame —
Part 2:
Lateral spread on building and transport products in vertical
configuration
AMENDMENT 1
Page 22, Clause 12
Add the following sentence at the end of the text after the first dash:
The longest time used in this calculation shall correspond to flame arrival at a position at least 30 mm
before the position of furthest flame propagation on the centreline of the test specimen.
Page 28, Annex E
After Table E.3, a
...

NORME ISO
INTERNATIONALE 5658-2
Deuxième édition
2006-09-15
AMENDEMENT 1
2011-11-01
Essais de réaction au feu —
Propagation du feu —
Partie 2:
Propagation latérale sur les produits
de bâtiment et de transport en position
verticale
AMENDEMENT 1
Reaction to fire tests — Spread of flame —
Part 2: Lateral spread on building and transport products in vertical
configuration
AMENDMENT 1
Numéro de référence
ISO 5658-2:2006/Amd.1:2011(F)
©
ISO 2011

---------------------- Page: 1 ----------------------
ISO 5658-2:2006/Amd.1:2011(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2011
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l’accord écrit
de l’ISO à l’adresse ci-après ou du comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Version française parue en 2012
Publié en Suisse
ii © ISO 2011 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 5658-2:2006/Amd.1:2011(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes nationaux de
normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est en général confiée aux
comités techniques de l’ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales,
en liaison avec l’ISO participent également aux travaux. L’ISO collabore étroitement avec la Commission
électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI, Partie 2.
La tâche principale des comités techniques est d’élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins des comités membres votants.
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de droits
de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable de ne pas avoir
identifié de tels droits de propriété et averti de leur existence.
L’Amendement 1 à l’ISO 5658-2:2006 a été élaboré par le comité technique ISO/TC 92, Sécurité au feu,
sous-comité SC 1, Amorçage et développement du feu.
© ISO 2011 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 5658-2:2006/Amd.1:2011(F)
Essais de réaction au feu — Propagation du feu —
Partie 2:
Propagation latérale sur les produits de bâtiment et
de transport en position verticale
AMENDEMENT 1
Page 24, Article 12
Ajouter la phrase suivante à la fin du texte du premier tiret:
«Le temps le plus long utilisé dans ce calcul doit correspondre à l’arrivée de la flamme à une position
située au moins 30 mm en retrait de celle de la progression maximale de la flamme sur l’axe médian de
l’éprouvette.»
Page 30, Annexe E
Après le Tableau E.3, ajouter le texte suivant ainsi que les Tableaux E.4, E.5 et E.6.
«En 2008, un troisième essai interlaboratoires a é
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.