Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens

ISO 6940:2004 specifies a method for the measurement of ease of ignition of vertically oriented textile fabrics and industrial products in the form of single or multi-component fabrics (coated, quilted, multilayered, sandwich constructions, and similar combinations), when subjected to a small, defined flame. This method assesses the properties of textile fabrics in response to flame contact under controlled conditions.

Textiles — Comportement au feu — Détermination de la facilité d'allumage d'éprouvettes orientées verticalement

L'ISO 6940:2004 spécifie une méthode permettant de mesurer la facilité d'allumage des étoffes et produits industriels orientés verticalement par rapport à une flamme définie de petite taille; il peut s'agir d'étoffes simples ou complexes (textiles enduits, ouatés, multicouches, en sandwich et autres structures similaires). Cette méthode permet d'évaluer les propriétés des étoffes en réaction à un contact avec la flamme dans des conditions contrôlées

General Information

Status
Published
Publication Date
26-Jan-2004
Technical Committee
Drafting Committee
Current Stage
9060 - Close of review
Start Date
04-Jun-2029
Ref Project

Relations

Buy Standard

Standard
ISO 6940:2004 - Textile fabrics -- Burning behaviour -- Determination of ease of ignition of vertically oriented specimens
English language
14 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 6940:2004 - Textiles -- Comportement au feu -- Détermination de la facilité d'allumage d'éprouvettes orientées verticalement
French language
15 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 6940
Second edition
2004-02-01
Textile fabrics — Burning behaviour —
Determination of ease of ignition of
vertically oriented specimens
Textiles — Comportement au feu — Détermination de la facilité
d'allumage d'éprouvettes orientées verticalement

Reference number
ISO 6940:2004(E)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 6940:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
©
ii ISO 2004 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 6940:2004(E)
Contents Page
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Cautionary measures . 3
7 Sampling . 3
8 Conditioning and testing atmosphere . 5
9 Setting up the apparatus . 7
10 Test procedure . 10
11 Calculation of the mean ignition time . 11
12 Precision . 11
13 Test report . 11
Annex A (normative) Description and construction of the burner . 12
Annex B (informative) Calculation of mean ignition time — worked example . 13
Annex C (informative) Experimental techniques . 14
©
ISO 2004 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 6940:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all m
...

NORME ISO
INTERNATIONALE 6940
Deuxième édition
2004-02-01
Textiles — Comportement au feu —
Détermination de la facilité d'allumage
d'éprouvettes orientées verticalement
Textile fabrics — Burning behaviour — Determination of ease of ignition
of vertically oriented specimens

Numéro de référence
ISO 6940:2004(F)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 6940:2004(F)
PDF — Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info du
fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir l'exploitation
de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation, veuillez en informer
le Secrétariat central à l'adresse donnée ci-dessous.
© ISO 2004
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
©
ii ISO 2004 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 6940:2004(F)
Sommaire Page
1 Domaine d'application . 1
2Références normatives . 1
3 Termes et définitions . 1
4 Principe . 2
5 Appareillage . 2
6Précautions . 3
7 Échantillonnage . 3
8 Atmosphère de conditionnement et d'essai . 5
9 Mise en place de l'appareillage . 7
10 Mode opératoire d'essai . 10
11 Calcul du temps d'allumage moyen . 11
12 Fidélité . 11
13 Rapport d'essai . 11
Annexe A (normative) Description et construction du brûleur . 13
Annexe B (informative) Calcul du temps moyen d'allumage — Exemple de calcul . 14
Annexe C (informative) Techniques expérimentales . 15
©
ISO 2004 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 6940:2004(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité tech
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.