iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 7583:1986

(Main)

Anodizing of aluminium and its alloys — Vocabulary

Anodizing of aluminium and its alloys — Vocabulary

ISO 7583 defines terms concerning anodized aluminium. In addition to terms in the three official ISO languages (English, French and Russian), this International Standard gives the equivalent terms and definitions in the German and Italian languages.

Anodisation de l'aluminium et de ses alliages — Vocabulaire

La présente norme définit les termes concernant l'aluminium anodisé. Elle reprend intégralement la version française de la norme internationale ISO 7583 et présente en annexe un tableau répertoriant les termes équivalents dans les langues anglaise, allemande et italienne.

General Information

Status
Withdrawn
Publication Date
19-Nov-1986
Withdrawal Date
19-Nov-1986
ICS
01.040.25 - Manufacturing engineering (Vocabularies)
25.220.20 - Surface treatment
Technical Committee
ISO/TC 79/SC 2 - Organic and anodic oxidation coatings on aluminium
Drafting Committee
ISO/TC 79/SC 2 - Organic and anodic oxidation coatings on aluminium
Current Stage
9599 - Withdrawal of International Standard
Completion Date
29-Jul-2013
Ref Project

Relations

Revised
ISO 7583:2013 - Anodizing of aluminium and its alloys — Terms and definitions
Effective Date
09-Oct-2010
Consolidated By
ISO 3378:2002 - Leather — Physical and mechanical tests — Determination of resistance to grain cracking and grain crack index
Effective Date
06-Jun-2022

Buy Standard

ISO 7583:1986ISO 7583:1986
PreviousNext
Standard
ISO 7583:1986
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

This page intentionally Mt blank

---------------------- Page: 1 ----------------------
This page intentionally IefI blank

--------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 7583:2013(Main)
Anodizing of aluminium and its alloys — Terms and definitions

ISO 7583:2013 defines terms concerning anodized aluminium.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off
ISO
ISO 14917:2017(Main)
Thermal spraying — Terminology, classification

ISO 14917:2017 defines processes and general terms for thermal spraying. It classifies thermal spraying processes according to type of spray material, to type of operation and to type of energy carrier. It specifies abbreviations for spray processes, sprayed coatings, and manufacturing steps.

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    25 pages
    French language
    sale 15% off
ISO
ISO 7583:2013(Main)
Anodizing of aluminium and its alloys — Terms and definitions

ISO 7583:2013 defines terms concerning anodized aluminium.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off
ISO
ISO/IEC 9797-1:2011/Amd 1:2023(Amendment)
Information technology — Security techniques — Message Authentication Codes (MACs) — Part 1: Mechanisms using a block cipher — Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
ISO
ISO 20200:2023(Main)
Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test

This document specifies a method of determining the degree of disintegration of plastic materials when exposed to a laboratory-scale composting environment. The method is not applicable to the determination of the biodegradability of plastic materials under composting conditions. Further testing is necessary to be able to claim compostability.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO/TS 24665:2023(Main)
Playground and recreational areas — Framework for the competence of playground inspectors and playground maintenance technicians

This document gives guidance and requirements for the education, examination and evaluation of the inspectors’ and maintenance technicians’ competence concerning public playground and recreational areas. This document describes the knowledge and competence required for each specific task an inspector or technician performs. This document is intended primarily for public playgrounds, but the principles are applicable to other recreational areas. This document does not include benefit/risk assessment methods. This document does not cover the competence of staff conducting product certification. NOTE 1 The different types of inspections covered are: routine visual inspection; operational inspection; annual main inspection; post-installation inspection; post-accident inspection; pre-installation consultation; mid-installation surveillance. NOTE 2 This document can be applicable to: roller-sport infrastructure; multi-sport arenas; outdoor exercise equipment; bouldering walls; portable and permanent socketed goals; parkour facilities; adventure playgrounds; ropes courses; inflatable play equipment.

  • Technical specification
    23 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
ISO
ISO 19642-1:2023(Main)
Road vehicles — Automotive cables — Part 1: Vocabulary and design guidelines

This document defines terms in the field of cables applied in road vehicle general purpose applications, for use in the other parts of the ISO 19642 series.

  • Standard
    27 pages
    English language
    sale 15% off
ISO
ISO 9241-221:2023(Main)
Ergonomics of human-system interaction — Part 221: Human-centred design process assessment model

This document specifies the process references model (PRM) for human-centred design (HCD) according to ISO 9241-220, as well as the process assessment model (PAM) for assessing these processes, based on ISO/IEC 33020 and in accordance with the requirements of ISO/IEC 33004. This HCD PAM contains a set of indicators to be considered while interpreting the intent of the HCD PRM defined in ISO 9241-220. These indicators can also be applied when implementing a process improvement programme post an assessment. NOTE 1 The PRM in this document focuses on assessing HCD processes rather than system life cycle, for example as in ISO/IEC/IEEE 15288, or software life cycle, as in ISO/IEC/IEEE 12207. NOTE 2 If processes beyond the scope of ISO 9241-220 are required, appropriate processes from other PRMs, such as ISO/IEC/IEEE 12207, ISO/IEC/IEEE 15288 or ISO/TS 18152, can be added based on the business needs of the organization. The intended application of this document is computer-based interactive systems. While the processes apply to interactive systems that deliver services, they do not cover the design of those services. The relevant aspects of the processes can also be applied to simple or non-computer-based interactive systems. NOTE 3 HCD concentrates on the human-centred aspects of design and not on other aspects of design, such as mechanical construction, programming or the basic design of services. The process descriptions in this document provide the basis for a rigorous assessment of an enterprise’s capability to carry out human-centred processes in conformity with the ISO/IEC 33004 and ISO/IEC 33020. This document is intended for use by organizations that want to address and improve their treatment of human-centred design of either their internal systems or the products and services they provide, and the procurement of systems and parts of systems. The processes can be applied by small- and medium-sized enterprises as well as by large organizations. NOTE 4 The scope of application of the PAM is the same as that of the PRM, which is described in ISO 9241-220:2019, Clause 1.

  • Standard
    102 pages
    English language
    sale 15% off
ISO
ISO 23316-7:2023(Main)
Tractors and machinery for agriculture and forestry — Electrical high-power interface 700 V DC / 480 V AC — Part 7: Mechanical integration

This document instructs the manufacturers of tractors and implements how to integrate mechanically and use the HPI. NOTE The terms "tractor" and "implement” are used instead of “supply system” and “consumer system” for better understanding in this part.

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO 10300-3:2023(Main)
Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength

This document specifies the fundamental formulae for use in the tooth root stress calculation of straight and helical (skew), Zerol and spiral bevel gears including hypoid gears, with a minimum rim thickness under the root of 3,5 mmn. All load influences on tooth root stress are included, insofar as they are the result of load transmitted by the gearing and able to be evaluated quantitatively. Stresses, such as those caused by the shrink fitting of gear rims, which are superposed on stresses due to tooth loading, are intended to be considered in the calculation of the tooth root stress, σF, or the permissible tooth root stress σFP. This document is not applicable in the assessment of tooth flank fracture. The formulae in this document are based on virtual cylindrical gears and restricted to bevel gears whose virtual cylindrical gears have transverse contact ratios of εvα This document does not apply to stress levels above those permitted for 103 cycles, as stresses in that range can exceed the elastic limit of the gear tooth. NOTE This document is not applicable to bevel gears which have an inadequate contact pattern under load. The user is cautioned that when the formulae are used for large average mean spiral angles (βm1 + βm2)/2 > 45°, for effective pressure angles αe > 30° and/or for large facewidths b > 13 mmn, the calculated results of this document should be confirmed by experience.

  • Standard
    43 pages
    English language
    sale 15% off