ISO 17830:2024

Solid biofuels — Particle size distribution of disintegrated pellets

This document specifies the requirements and method used to determine particle size distribution of disintegrated pellets. It is applicable for pellets that fully disintegrate in hot water.

Biocombustibles solides — Distribution granulométrique des granulés désintégrés

Le présent document spécifie les exigences qui s'appliquent et la méthode utilisée pour déterminer la distribution granulométrique des granulés désintégrés. Elle est applicable aux granulés qui se désintègrent entièrement dans l'eau chaude.

General Information

• Status: Published
• Publication Date: 23-May-2024
• ICS: 27.190 - Biological sources and alternative sources of energy
• ICS: 75.160.40 - Biofuels
• Technical Committee: ISO/TC 238 - Solid biofuels
• Drafting Committee: ISO/TC 238 - Solid biofuels
• Current Stage: 6060 - International Standard published
• Start Date: 24-May-2024
• Due Date: 16-May-2024
• Completion Date: 24-May-2024

Relations

• Consolidates: ISO 8871-2:2020 - Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 2: Identification and characterization
• Effective Date: 06-Jun-2022
• Revises: ISO 17830:2016 - Solid biofuels — Particle size distribution of disintegrated pellets
• Effective Date: 06-Jun-2022

Standards Content (Sample)

International
Standard
ISO 17830
Second edition
Solid biofuels — Particle size
2024-05
distribution of disintegrated pellets
Biocombustibles solides — Distribution granulométrique des
granulés désintégrés
Reference number
ISO 17830:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 17830:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 17830:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 1
6 Apparatus . 2
7 Sample preparation . 2
8 Procedure . 3
8.1 Flowchart of the test procedure .3
8.2 Disintegration .3
8.3 Drying .4
8.4 Moisture conditioning.4
8.5 Sieving .4
9 Calculation . 5
10 Performance characteristics .
...

Norme
internationale
ISO 17830
Deuxième édition
Biocombustibles solides —
2024-05
Distribution granulométrique des
granulés désintégrés
Solid biofuels — Particle size distribution of disintegrated pellets
Numéro de référence
ISO 17830:2024(fr) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 17830:2024(fr)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2024
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: [phone]
E-mail: [e-mail]
Web: www.iso.org
Publié en Suisse

© ISO 2024 – Tous droits réservés
ii

---------------------- Page: 2 ----------------------
ISO 17830:2024(fr)
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe. 1
5 Réactifs . 2
6 Appareillage . 2
7 Préparation des échantillons . 3
8 Mode opératoire . 3
8.1 Diagramme du mode opératoire d’essai .3
8.2 Désintégration .4
8.3 Séchage .4
8.4 Maîtrise de l'humidité .4
8.5 Tamisage .4
9 Calcul . 5
10 Caractéristiques de performance . 7
11 Rappor
...

FINAL DRAFT
International
Standard
ISO/FDIS 17830
ISO/TC 238
Solid biofuels — Particle size
Secretariat: SIS
distribution of disintegrated pellets
Voting begins on:
Biocombustibles solides — Distribution granulométrique des 2024-02-20
granulés désintégrés
Voting terminates on:
2024-04-16
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 17830:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/FDIS 17830:2024(en)
International
Standard
ISO/FDIS 17830
ISO/TC 238
Solid biofuels — Particle size
Secretariat: SIS
distribution of disintegrated pellets
Voting begins on:
Biocombustibles solides — Distribution granulométrique des
granulés désintégrés
Voting terminates on:
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 17830:2024(en) © ISO 2024

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/FDIS 17830:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 2
6 Apparatus . 2
7 Sample preparation . 3
8 Procedure . 3
8.1 Flowchart of the test procedure .
...

DRAFT INTERNATIONAL STANDARD
ISO/DISFDIS 17830:2023(E)
ISO/TC 238
Secretariat: SIS
Date: 2022-03-21
Solid biofuels — Particle size distribution of disintegrated pellets
Biocombustibles solides — Distribution granulométrique des granulés désintégrés
FDIS stage

---------------------- Page: 1 ----------------------
ISO/DISFDIS 17830:2023(E2024(en)
© ISO 20232024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved
© ISO 2024 – All rights reserved

ii

---------------------- Page: 2 ----------------------
ISO/DISFDIS 17830:2023(E2024(en)
Contents
Foreword . v
Introduction .vi i
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 2
6 Apparatus . 2
7 Sample preparation . 3
8 Procedure . 3
8.1 Flowchart of the test procedure . 3
8.2 Disintegration . 4
8.3 Drying . 5
8.4 Moisture conditioning . 5
8.5 Sieving . 5
9 Calculation . 6
10 Performance characteristics . 8
11 Test report . 8
Annex A (informative) Characteristics on determination of particle size distribution of material within pellets
in accordance with the 2007 inter-comparison study .
...