Graphic technology — Communication of graphic paper properties

ISO 15397:2014 specifies the list of relevant properties of paper substrates to be communicated between the paper and printing industries. ISO 15397:2014 is applicable to papers intended to be printed in rotogravure, cold-set web offset, heat-set web offset, sheet-fed offset, and flexographic printing processes and to proofing substrates.

Technologie graphique — Communication des propriétés des papiers graphiques

L'ISO 15397:2014 spécifie la liste des propriétés pertinentes des supports papetiers devant être communiquées entre les secteurs papetier et de l'impression. L'ISO 15397:2014 s'applique aux papiers destinés à l'impression en héliogravure, en rotative offset sans sécheur, en rotative offset avec sécheur, en offset à feuilles, ainsi qu'aux procédés d'impression flexographiques; elle s'applique également aux supports d'épreuve.

Grafična tehnologija - Komunikacija o lastnostih grafičnih papirjev

General Information

Status
Published
Publication Date
02-Feb-2014
Current Stage
9020 - International Standard under periodical review
Start Date
15-Apr-2024
Completion Date
15-Apr-2024

Buy Standard

Standard
ISO 15397:2020
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 15397:2014 - Graphic technology -- Communication of graphic paper properties
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 15397:2014 - Technologie graphique -- Communication des propriétés des papiers graphiques
French language
13 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO 15397:2020
01-april-2020
Grafična tehnologija - Komunikacija o lastnostih grafičnih papirjev
Graphic technology - Communication of graphic paper properties
Technologie graphique - Communication des propriétés des papiers graphiques
Ta slovenski standard je istoveten z: ISO 15397:2014
ICS:
37.100.20 Materiali za grafično tehniko Materials for graphic
technology
SIST ISO 15397:2020 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ISO 15397:2020

---------------------- Page: 2 ----------------------
SIST ISO 15397:2020
INTERNATIONAL ISO
STANDARD 15397
First edition
2014-02-01
Graphic technology — Communication
of graphic paper properties
Technologie graphique — Communication des propriétés des papiers
graphiques
Reference number
ISO 15397:2014(E)
©
ISO 2014

---------------------- Page: 3 ----------------------
SIST ISO 15397:2020
ISO 15397:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 4 ----------------------
SIST ISO 15397:2020
ISO 15397:2014(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 List of required criteria for communication of paper properties . 5
5 ISO standards related to required criteria . 6
5.1 Sampling and general information useful for technical communication . 6
5.2 Brand name and paper mill . 6
5.3 Grammage . 7
5.4 Bulk and/or thickness . 7
5.5 Roughness for evaluation of surface properties . 7
5.6 Gloss . 7
5.7 Opacity . 8
5.8 Brightness and whiteness of unprinted paper . 8
5.9 Colour measurement of paper white point in printing conditions (D50/2°) . 9
5.10 Colour measurement of unprinted paper in outdoor conditions (D65/10°) .10
5.11 Supported colour gamut in the context of prepress design .
...

INTERNATIONAL ISO
STANDARD 15397
First edition
2014-02-01
Graphic technology — Communication
of graphic paper properties
Technologie graphique — Communication des propriétés des papiers
graphiques
Reference number
ISO 15397:2014(E)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 15397:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 15397:2014(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 List of required criteria for communication of paper properties . 5
5 ISO standards related to required criteria . 6
5.1 Sampling and general information useful for technical communication . 6
5.2 Brand name and paper mill . 6
5.3 Grammage . 7
5.4 Bulk and/or thickness . 7
5.5 Roughness for evaluation of surface properties . 7
5.6 Gloss . 7
5.7 Opacity . 8
5.8 Brightness and whiteness of unprinted paper . 8
5.9 Colour measurement of paper white point in printing conditions (D50/2°) . 9
5.10 Colour measurement of unprinted paper in outdoor conditions (D65/10°) .10
5.11 Supported colour gamut in the context of prepress design .10
5.12 Fluorescence in the context of prepress .10
5.13 Storage conditions, influence of aging and testing conditions for proofing substrates .11
5.14 Bending resistance (bending stiffness) for Sheet-Fed Offset printing substrates .11
Bibliography .12
© ISO 2014 – All rights reserved iii

-
...

NORME ISO
INTERNATIONALE 15397
Première édition
2014-02-01
Technologie graphique —
Communication des propriétés des
papiers graphiques
Graphic technology — Communication of graphic paper properties
Numéro de référence
ISO 15397:2014(F)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 15397:2014(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2014
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2014 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 15397:2014(F)

Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 2
4 Liste des critères exigés pour la communication des propriétés du papier .5
5 Normes ISO relatives aux critères exigés . 6
5.1 Échantillonnage et informations générales utiles pour la communication technique . 6
5.2 Nom commercial et papeterie. 7
5.3 Grammage . 7
5.4 Volume spécifique et/ou épaisseur . 7
5.5 Rugosité pour l’évaluation des propriétés de surface . 7
5.6 Brillant . 8
5.7 Opacité . 8
5.8 Degré de blancheur et degré de blanc du papier non imprimé . 9
5.9 Mesurage de la couleur du point blanc du papier en conditions d’impression (D50/2°) .10
5.10 Mesurage de la couleur du papier non imprimé en conditions extérieures (D65/10°) .10
5.11 Gamme de couleurs supportée dans le contexte de la conception prépresse .10
5.12 Fluorescence dans le contexte du prépresse .11
5.13 Conditions de stockage, influence du vieillissement et conditions d’essai pour les
supports d’épreuve .12
5.14 Résistance à la flexion (rigidité à la flexion) pour les supports d’impression en offset
à feuilles .12
Bibliographie .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.