iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 7747:1983

(Main)

Road vehicles — Filter elements for full flow oil filters — Dimensions

Road vehicles — Filter elements for full flow oil filters — Dimensions

Specifies the essential dimensional characteristics necessary for the interchangeability of filter elements. Most filter elements are specified with two alternative internal diameters; however, the values listed in the "preferred" column of the table are recommended for future equipment.

Véhicules routiers — Éléments de filtre pour filtres à huile plein débit — Dimensions

La présente norme internationale spécifie les caractéristiques dimensionnelles essentielles nécessaires pour l'interchangeabilité des éléments de filtre pour filtres à huile plein débit généralement utilisés dans les véhicules routiers. La plupart des éléments de filtre sont spécifiés avec deux diamètres intérieurs, D2, en alternative; cependant, les valeurs figurant dans la colonne "valeurs préférées" du tableau sont recommandées pour les équipements futurs. La présente norme internationale peut être utilisée pour d'autres applications de filtre à huile lorsqu'aucune autre norme spécifique n'existe.

General Information

Status
Published
Publication Date
31-May-1983
ICS
43.060.30 - Cooling systems. Lubricating systems
Technical Committee
ISO/TC 70/SC 7 - Tests for lubricating oil filters
Drafting Committee
ISO/TC 70/SC 7 - Tests for lubricating oil filters
Current Stage
9520 - Withdrawal ballot initiated
Start Date
08-Mar-2024
Completion Date
08-Mar-2024
Ref Project

Buy Standard

ISO 7747:1983 - Road vehicles -- Filter elements for full flow oil filters -- DimensionsISO 7747:1983 - Road vehicles -- Filter elements for full flow oil filters -- Dimensions
PreviousNext
Standard
ISO 7747:1983 - Road vehicles -- Filter elements for full flow oil filters -- Dimensions
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 7747:1983 - Véhicules routiers -- Éléments de filtre pour filtres a huile plein débit -- DimensionsISO 7747:1983 - Véhicules routiers -- Éléments de filtre pour filtres a huile plein débit -- Dimensions
PreviousNext
Standard
ISO 7747:1983 - Véhicules routiers -- Éléments de filtre pour filtres a huile plein débit -- Dimensions
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 7747:1983 - Véhicules routiers -- Éléments de filtre pour filtres a huile plein débit -- DimensionsISO 7747:1983 - Véhicules routiers -- Éléments de filtre pour filtres a huile plein débit -- Dimensions
PreviousNext
Standard
ISO 7747:1983 - Véhicules routiers -- Éléments de filtre pour filtres a huile plein débit -- Dimensions
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)((I1YHAPO~HAfl OPTAHH3ALW I-IO CTAH~APTH3ALWlW6RGANISATION INTERNATIONALE DE NORMALISATION
Filter .elem:ents for full flow oil filters I
Road vekicles -
Dimensions
- &ments de filtre pour filtres ~3 huile plein d6bit - Dimensions
Whicules routiers
First edition - 1983-06-15
,
:
Ref. No. PS0 7747-1983 (E)
U DC 629.113-729.3
. . .
. .
Descriptors : road vehicles, oil filters, dimensions, interchangeability.
Price based on 2 pages

---------------------- Page: 1 ----------------------
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bodies). The work of developing International
Standards is carried out through ISO technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 7747 was developed by Technical Committee ISO/TC 22,
Road vehicles, and was circulated to the member bodies in November 1981.
lt has been approved by the member bodies of the following countries :
Austria Poland
Germany, F. R.
Belgium Romania
Hungary
Brazil Italy South Africa, Rep. of
Bulgaria Japan Spain
China Korea, Dem. P. Rep. of Sweden
Czechoslovakia Korea, Rep. of Switzerland
Egypt, Arab Rep. of Netherlands USA
France New Zealand USSR
The member body of the following country expressed disapproval of the document on
technical grounds :
United Kingdom
0 International Organkation for Standardkation, 1983
Pr
...

Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlEmJO(YHAPO~HAR OPTAHH3AlJHR Il0 CTAH~APTbl3Al&lMWIRGANISAtlON INTERNATIONALE DE NORMALISATION
Véhicules routiers - Éléments de filtre pour filtres à huile
plein débit - Dimensions
Road vehicles - Fifter elements for full flow oil filters - Dimensions
Première édition - 1983-06-E
CDU 629.113-729.3 Réf. no : ISO 7747-1983 (FI
G:
Y
Descripteurs : véhicule routier, filtre à huile, dimension, interchangeabilité.
Prix basé sur 2 pages

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’elaboration
des Normes internationales est confiée aux comites techniques de I’ISO. Chaque
comite membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 7747 a été élaborée par le comité technique ISO/TC 22,
Véhicules routiers, et a été soumise aux comités membres en novembre 1981.
Les comites membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’
Corée, Rép. dem. p. de Pays-Bas
Allemagne, R. F. Égypte, Rép. arabe d’
Pologne
Autriche
Espagne Roumanie
Belgique France
Suéde
Brésil Hongrie Suisse
Bulgarie Italie
Tchécoslovaquie
Chine Japon URSS
Corée, Rép. de Nouvelle-Zélande USA
Le comité membre du pays suivant l’a désapprouvée pour des raisons techniques:
Royaume-Uni
0 Organisation internationale de normalisation, 1983 0
Impri
...

Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlEmJO(YHAPO~HAR OPTAHH3AlJHR Il0 CTAH~APTbl3Al&lMWIRGANISAtlON INTERNATIONALE DE NORMALISATION
Véhicules routiers - Éléments de filtre pour filtres à huile
plein débit - Dimensions
Road vehicles - Fifter elements for full flow oil filters - Dimensions
Première édition - 1983-06-E
CDU 629.113-729.3 Réf. no : ISO 7747-1983 (FI
G:
Y
Descripteurs : véhicule routier, filtre à huile, dimension, interchangeabilité.
Prix basé sur 2 pages

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’elaboration
des Normes internationales est confiée aux comites techniques de I’ISO. Chaque
comite membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 7747 a été élaborée par le comité technique ISO/TC 22,
Véhicules routiers, et a été soumise aux comités membres en novembre 1981.
Les comites membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’
Corée, Rép. dem. p. de Pays-Bas
Allemagne, R. F. Égypte, Rép. arabe d’
Pologne
Autriche
Espagne Roumanie
Belgique France
Suéde
Brésil Hongrie Suisse
Bulgarie Italie
Tchécoslovaquie
Chine Japon URSS
Corée, Rép. de Nouvelle-Zélande USA
Le comité membre du pays suivant l’a désapprouvée pour des raisons techniques:
Royaume-Uni
0 Organisation internationale de normalisation, 1983 0
Impri
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 6415:2005(Main)
Internal combustion engines — Spin-on filters for lubricating oil — Dimensions

ISO 6415:2005 specifies the essential dimensions necessary for interchangeability of spin-on filters of the full-flow type for the filtration of lubricating oil for internal combustion engines. It also gives the designation and marking of these filters.

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO 21441:2019(Main)
Road vehicles — Engine EGR cooler — Heat dissipation test methods

This document defines the methodology for the measurement of heat dissipation and pressure loss of liquid cooled engine EGR coolers in internal combustion engines for road vehicles. The principles of this document are valid for clean and fouled EGR coolers.

  • Standard
    23 pages
    English language
    sale 15% off
ISO
ISO 6415:2005(Main)
Internal combustion engines — Spin-on filters for lubricating oil — Dimensions

ISO 6415:2005 specifies the essential dimensions necessary for interchangeability of spin-on filters of the full-flow type for the filtration of lubricating oil for internal combustion engines. It also gives the designation and marking of these filters.

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO 11841-1:2000(Main)
Road vehicles and internal combustion engines — Filter vocabulary — Part 1: Definitions of filters and filter components

This part of ISO 11841 defines terms for filters and components used in road vehicles and internal combustion engines for general use (e.g. marine engines, stationary engines). The purpose of ISO 11841 is to standardize definitions, to facilitate their understanding, and to create the basis of a uniform translation into foreign languages. It is also recommended that this International Standard be used when establishing other technical documents.

  • Standard
    18 pages
    English language
    sale 15% off
ISO
ISO 11841-2:2000(Main)
Road vehicles and internal combustion engines — Filter vocabulary — Part 2: Definitions of characteristics of filters and their components

This part of ISO 11841 defines terms for the characteristics of filters and filter components used in road vehicles and internal combustion engines for general use (e.g. marine engines, stationary engines). The purpose of ISO 11841 is to standardize definitions, to facilitate their understanding, and to create the basis of a uniform translation into foreign languages. It is also recommended that this International Standard be used when establishing other technical documents.

  • Standard
    18 pages
    English language
    sale 15% off
ISO
ISO 9818:1991(Main)
Passenger cars — Engine cooling systems — Test methods and marking of pressure caps

Specifies test methods and a marking system for pressure caps. Annex A forms an integral part of this standard.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
ISO
ISO 9817:1991(Main)
Passenger cars — Engine cooling systems — Dimensions of pressure caps and their ramp seats on filler necks

The seats with clamping ramps shown in figure 1 shall be in accordance with the dimensions given in table 1. The pressure caps shown in figure 2 shall be in accordance with the dimensions given in table 2.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 3384-1:2024(Main)
Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature

This document specifies two procedures for determining the decrease in counterforce exerted by a test piece of vulcanized or thermoplastic rubber which has been compressed to a constant deformation and maintained thus at a predetermined test temperature. The counterforce can be determined either by means of a continuous-measurement system or by a discontinuous-measurement one. Two test methods are specified, method A and method B. In method A the compression and all measurements of counterforce are made at test temperature and in method B the compression and all measurements of counterforce are made at standard laboratory temperature. Method A and method B do not give the same results, as in method B the shrinkage of the material from the test temperature to standard laboratory temperature is included in the result. Two forms of test piece are specified in this document: cylindrical test pieces and rings. Comparison of results is valid only when made on test pieces of similar size and shape. The use of ring test pieces is particularly suitable for the determination of stress relaxation in liquid environments. This document deals only with testing at constant ambient or elevated temperature. Testing at temperatures below standard laboratory temperature is not specified. The methods have been used for low‑temperature testing, but their reliability under these conditions is not proven.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off
ISO
ISO 18562-1:2024(Main)
Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 1: Evaluation and testing within a risk management process

This document specifies: — the general principles governing the biological evaluation within a risk management process of the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or supply substances via the respiratory tract to a patient in all environments; — the general categorization of gas pathways based on the nature and duration of their contact with the gas stream; — the evaluation of existing relevant data from all sources; — the identification of gaps in the available data set on the basis of a risk analysis; — the identification of additional data sets necessary to analyse the biological safety of the gas pathway; — the assessment of the biological safety of the gas pathway. This document covers general principles regarding biocompatibility assessment of medical device materials, which make up the gas pathway, in normal use and normal condition. This document does not cover biological hazards arising from mechanical damage. The other parts of ISO 18562 cover specific tests that address potentially hazardous substances that are added to the respirable gas stream and establish acceptance criteria for these substances. This document addresses potential contamination of the gas stream arising from the gas pathways within the medical device, which might then be conducted to the patient. This document applies over the expected lifetime of the medical device when operated according to the instructions for use. This includes degradation arising from exposure to environmental conditions as well as cleaning, disinfection and sterilisation (i.e. processing). It also includes user action or inaction (omission) that leads to an unintended or unexpected outcome (result) (i.e. use error). It does not include conscious/intentional action or inaction that violates the instructions for use and is beyond reasonable risk control by the manufacturer (i.e. abnormal use). This document does not address biological evaluation of the surfaces of medical devices that have direct contact with the patient or user. The requirements for direct contact surfaces are found in the ISO 10993 series. Medical devices, parts or accessories containing gas pathways that are addressed by this document include, but are not limited to, ventilators, anaesthesia workstations (including gas mixers), breathing systems, oxygen conserving equipment, oxygen concentrators, nebulizers, low-pressure hose assemblies, humidifiers, heat and moisture exchangers, respiratory gas monitors, respiration monitors, masks, medical respiratory personal protective equipment, mouth pieces, resuscitators, breathing tubes, breathing system filters and Y-pieces as well as any breathing accessories intended to be used with such medical devices. The enclosed chamber of an incubator, including the mattress, and the inner surface of an oxygen hood are considered to be gas pathways and are also addressed by this document. This document does not address contamination already present in the gas supplied from the gas sources while medical devices are in normal use. EXAMPLE Contamination arriving at the medical device from gas sources such as medical gas pipeline systems (including the non-return valves in the pipeline outlets), outlets of pressure regulators connected or integral to a medical gas cylinder, or room air taken into the medical device is not addressed by ISO 18562 (all parts).

  • Standard
    34 pages
    English language
    sale 15% off
  • Standard
    35 pages
    French language
    sale 15% off
  • Draft
    40 pages
    English language
    sale 15% off
  • Draft
    40 pages
    English language
    sale 15% off
ISO
ISO/IEC 30137-1:2024(Main)
Information technology — Use of biometrics in video surveillance systems — Part 1: System design and specification

The ISO/IEC 30137 series is applicable to the use of biometrics in VSSs (also known as closed circuit television or CCTV systems) for a number of scenarios, including real-time operation against watchlists and in post-event analysis of video data. In most cases, the biometric mode of choice will be face recognition, but this document also provides guidance for other modalities, such as gait recognition. This document: — defines the key terms for use in the specification of biometric technologies in a VSS, including metrics for defining performance; — provides guidance on the selection of camera types, placement of cameras, image specification, etc., for the operation of a biometric recognition capability in conjunction with a VSS; — provides guidance on the composition of the gallery (or watchlist) against which facial images from the VSS are compared, including the selection of appropriate images of sufficient quality, and the size of the gallery in relation to performance requirements; — makes recommendations on data formats for facial images and other relevant information (including metadata) obtained from video footage, used in watchlist images, or from observations made by human operators; — establishes general principles for supporting the operator of the VSS, including user interfaces and processes to ensure efficient and effective operation, and highlights the need to have suitably trained personnel; — highlights the need for robust governance processes to provide assurance that the implemented security, privacy and personal data protection measures specific to the use of biometric technologies with a VSS (e.g. internationally recognizable signage) are fit for purpose, and that societal considerations are reflected in the deployed system. This document also provides information on related recognition and detection tasks in a VSS, such as: — estimation of crowd densities; — determination of patterns of movement of individuals; — identification of individuals appearing in more than one camera; — use of other biometric modalities such as gait or iris; — use of specialized software to infer attributes of individuals, e.g. estimation of gender and age; — interfaces to another related functionality, e.g. video analytics to measure queue lengths or to provide alerts for abandoned baggage.

  • Standard
    46 pages
    English language
    sale 15% off
  • Draft
    48 pages
    English language
    sale 15% off
  • Draft
    48 pages
    English language
    sale 15% off