SIST EN 1093-3:2007+A1:2008
(Main)Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
This European Standard specifies a test bench method for the measurement of the emission rate of a given airborne hazardous substance from machines using a test bench under specified operating conditions of the machine. The measurement of the emission rates of a given pollutant emitted from machines can serve for: a) the evaluation of the performance of a machine; b) the evaluation of the reduction of pollutant emissions of the machine; c) the comparison of machines within groups of machines with the same intended use (groups are defined by the function and materials processed); d) the ranking of machines from the same group according to their emission rates; e) the determination of the state of the art of machines with respect to their emission rates.
Sicherheit von Maschinen - Bewertung der Emission von luftgetragenen Gefahrstoffen - Teil 3: Prüfstandverfahren zur Messung der Emissionsrate eines bestimmten luftverunreinigenden Stoffes
Dieses Dokument legt ein Verfahren zur Messung der Emissionsrate eines bestimmten luftgetragenen
luftverunreinigenden Stoffes von Maschinen in einem Prüfstand unter festgelegten Betriebsbedingungen der
Maschine fest.
Die Messung der Emissionsraten eines bestimmten luftverunreinigenden Stoffes bei der Emission aus
Maschinen kann dienen:
a) zur Bewertung der Leistung einer Maschine;
b) zur Bewertung der Reduktion luftverunreinigender Emissionen der Maschine;
c) zum Vergleich der Maschinen innerhalb von Maschinengruppen mit gleicher bestimmungsgemäßer
Verwendung (die Gruppen werden definiert nach der Maschinenfunktion und nach den bearbeiteten
Materialien);
d) zum Einordnen von Maschinen aus der gleichen Gruppe entsprechend ihrer Emissionsraten;
e) zur Bestimmung des Standes der Technik der Maschinen in Bezug auf ihre Emissionsraten.
Sécurité des machines - Evaluation de l'émission de substances dangereuses véhiculées par l'air - Partie 3: Méthode sur banc d'essai pour le mesurage du débit d'émission d'un polluant donné
Le présent document prescrit une méthode sur banc d�essai pour le mesurage du débit d�émission d�une
substance dangereuse spécifiée, véhiculée par l�air, en utilisant un banc d�essai dans les conditions définies
de fonctionnement de la machine.
Le mesurage des débits d�émission d�un polluant donné émis par les machines peut être utile pour :
a) l�évaluation de la performance d�une machine ;
b) l�évaluation de la réduction des émissions de polluant par la machine ;
c) la comparaison de machines dans des groupes de machines ayant la même utilisation normale (les
groupes sont définis par la fonction et les matériaux traités) ;
d) le classement des machines du même groupe en fonction de leur débit d�émission ;
e) la détermination de l�état de la technique pour ce qui concerne les débits d�émission des machines.
Varnost strojev - Vrednotenje emisije nevarnih snovi, ki jih prenaša zrak - 3. del: Metoda s preskusno mizo za merjenje stopnje emisije določene onesnaževalne snovi
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QDåHYDOQHVQRYLSicherheit von Maschinen - Bewertung der Emission von luftgetragenen Gefahrstoffen - Teil 3: Prüfstandverfahren zur Messung der Emissionsrate eines bestimmten luftverunreinigenden StoffesSécurité des machines - Evaluation de l'émission de substances dangereuses véhiculées par l'air - Partie 3: Méthode sur banc d'essai pour le mesurage du débit d'émission d'un polluant donnéSafety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant13.110Varnost strojevSafety of machinery13.040.40Stationary source emissionsICS:Ta slovenski standard je istoveten z:EN 1093-3:2006+A1:2008SIST EN 1093-3:2007+A1:2008en,fr,de01-oktober-2008SIST EN 1093-3:2007+A1:2008SLOVENSKI
STANDARD
SIST EN 1093-3:2007+A1:2008
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1093-3:2006+A1
June 2008 ICS 13.040.40 Supersedes EN 1093-3:2006English Version
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
Sécurité des machines - Evaluation de l'émission de substances dangereuses véhiculées par l'air - Partie 3: Méthode sur banc d'essai pour le mesurage du débit d'émission d'un polluant donné
Sicherheit von Maschinen - Bewertung der Emission von luftgetragenen Gefahrstoffen - Teil 3: Prüfstandverfahren zur Messung der Emissionsrate eines bestimmten luftverunreinigenden Stoffes This European Standard was approved by CEN on 4 November 2006 and includes Amendment 1 approved by CEN on 14 May 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1093-3:2006+A1:2008: ESIST EN 1093-3:2007+A1:2008
EN 1093-3:2006+A1:2008 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Principle.6 5 Description of the test bench.6 6 Test method.7 7 Expression of results.9 8 Test report.9 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC.11 Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""".12 Bibliography.13
SIST EN 1093-3:2007+A1:2008
EN 1093-3:2006+A1:2008 (E) 3 Foreword This document (EN 1093-3:2006+A1:2008) has been prepared by Technical Committee CEN/TC 114 “Safety of machinery”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2008, and conflicting national standards shall be withdrawn at the latest by December 2008. This document includes Amendment 1, approved by CEN on 2008-05-14. This document supersedes !EN 1093-3:2006". The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ". This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document." This part 3 of EN 1093 Safety of machinery — Evaluation of the emission of airborne hazardous substances belongs to a series of documents, the other parts of which are the following: Part 1: Selection of test methods; Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant; Part 4: Capture efficiency of an exhaust system — Tracer method; Part 6: Separation efficiency by mass, unducted outlet; Part 7: Separation efficiency by mass, ducted outlet; Part 8: Pollutant concentration parameter, test bench method; Part 9: Pollutant concentration parameter, room method; Part 11: Decontamination index. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 1093-3:2007+A1:2008
EN 1093-3:2006+A1:2008 (E) 4 Introduction This European Standard is a type B standard as stated in EN ISO 12100-1. The provisions of this European Standard can be supplemented or modified by a type C standard. NOTE For machines which are covered by the scope of a type C standard and which have been designed and built according to the provisions of that standard, the provisions of that type C standard take precedence over the provisions of this type B standard. SIST EN 1093-3:2007+A1:2008
EN 1093-3:2006+A1:2008 (E) 5
1 Scope This European Standard specifies a test bench method for the measurement of the emission rate of a given airborne hazardous substance from machines using a test bench under specified operating conditions of the machine. The measurement of the emission rates of a given pollutant emitted from machines can serve for: a) the evaluation of the performance of a machine; b) the evaluation of the reduction of pollutant emissions of the machine; c) the comparison of machines within groups of machines with the same intended use (groups are defined by the function and materials processed); d) the ranking of machines from the same group according to their emission rates; e) the determination of the state of the art of machines with respect to their emission rates. This European Standard is not applicable to machinery which is manufactured before the date of its publication as an EN. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology (ISO 12100-1:2003) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100-1:2003 and the following apply. 3.1 uncontrolled emission rate of a given pollutant uncontrolled emission rate of a specified pollutant (deprecated) um& mass of pollutant emitted from the machine into the space around the machine per unit of time NOTE 1 Any measures to reduce the air pollution around the machine (e.g. capture devices, containment equipment, wetting process) are not in use or are de-activated. NOTE 2 In previous language use the term "uncontrolled emission rate of a specified pollutant" was used. This term has been identified as ambiguous in view of its possible translation and should therefore not be used any longer. [EN 1093-1:1998, 3.2.1] SIST EN 1093-3:2007+A1:2008
EN 1093-3:2006+A1:2008 (E) 6 3.2 controlled emission rate of a given pollutant controlled emission rate of a specified pollutant (deprecated) km& mass of pollutant emitted from the machine into the space around the machine per unit of time, taking into account the effects of measures to reduce the air pollution NOTE In previous language use the term "controlled emission rate of a specified pollutant" was used. This term has been identified as ambiguous in view of its possible translation and should therefore not be used any longer. [EN 1093-1:1998, 3.2.2] 4 Principle The principle of the measurement method is to operate machines under controlled conditions under a uniform air flow in a test bench and to collect a representative part of the airborne emissions in that air flow. 5 Description of the test bench The test bench consists generally of a cabin with a funnel and a duct, of rectangular or circular cross section followed by a fan (see Figure 1). It is the responsibility of the type C standard committees to select parameters within the ranges given in Figure 1. The fan produces an air flow in the test cabin from the inlet towards the funnel. The cabin should be equipped with an inlet that ensures that the air entering the cabin ha
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.