SIST EN ISO 2873:2003

Packaging - Complete, filled transport packages and unit loads - Low pressure test (ISO 2873:2000)

This standard specifies a method for subjecting complete filled transport packaging and unit loads to conditions of low air pressure, similar to that encountered in aircraft.

Verpackung - Versandfertige Packstücke und Ladeeinheiten - Unterdruckprüfung (ISO 2873:2000)

In dieser Internationalen Norm wird ein Verfahren für die Prüfung versandfertiger Packstücke und Ladeeinheiten
unter den Bedingungen festgelegt, die bei niedrigem Luftdruck, z. B. in Flugzeugen, anzutreffen sind.
Dieses Verfahren ist auf versandfertige Packstücke und Ladeeinheiten anzuwenden, die für den Transport in
druckausgeglichenen Flugzeugen vorgesehen sind, die in einer beliebigen Höhe fliegen und in nicht druckaus-
geglichenen Flugzeugen, die in Höhen bis zu 3 500 m fliegen.

Emballages - Emballages d'expédition complets et pleins et charges unitaires - Essai a basse pression (ISO 2873:2000)

La présente Norme internationale spécifie une méthode d'essai pour soumettre des emballages d'expédition
complets et pleins ainsi que des charges unitaires aux conditions de basse pression semblables à celles des
avions.
Cette méthode est applicable aux emballages d'expédition complets et pleins et aux charges unitaires transportés
dans des avions pressurisés, quelle que soit leur altitude de vol, ainsi que dans des avions non pressurisés volant
à 3 500 m ou moins.

Embalaža - Celovita, napolnjena transportna embalaža - Preskus z nizkim atmosferskim tlakom (ISO 2873:2000)

General Information

• Status: Published
• Publication Date: 31-Dec-2002
• ICS: 55.180.40 - Complete, filled transport packages
• Technical Committee: EPO - Packaging - sales and grouped
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2003
• Due Date: 01-Jan-2003
• Completion Date: 01-Jan-2003
• Directive: 80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
• Directive: 87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
• Ref Project: EN ISO 2873:2002 - Packaging - Complete, filled transport packages and unit loads - Low pressure test (ISO 2873:2000)

Relations

• Replaces: SIST EN 22873:1996 - Packaging - Complete, filled transport packages - Low pressure test (ISO 2873:1985)
• Effective Date: 01-Jan-2003

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2873:2003
01-januar-2003
1DGRPHãþD
SIST EN 22873:1996
Embalaža - Celovita, napolnjena transportna embalaža - Preskus z nizkim
atmosferskim tlakom (ISO 2873:2000)
Packaging - Complete, filled transport packages and unit loads - Low pressure test (ISO
2873:2000)
Verpackung - Versandfertige Packstücke und Ladeeinheiten - Unterdruckprüfung (ISO
2873:2000)
Emballages - Emballages d'expédition complets et pleins et charges unitaires - Essai a
basse pression (ISO 2873:2000)
Ta slovenski standard je istoveten z: EN ISO 2873:2002
ICS:
55.180.40 Celovita, napolnjena Complete, filled transport
transportna embalaža packages
SIST EN ISO 2873:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2873:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 2873:2003
EUROPEAN STANDARD
EN ISO 2873
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2002
ICS 55.180.40 Supersedes EN 22873:1992
English version
Packaging - Complete, filled transport packages and unit loads -
Low pressure test (ISO 2873:2000)
Emballages - Emballages d'expédition complets et pleins Verpackung - Versandfertige Packstücke und
et charges unitaires - Essai à basse pression (ISO Ladeeinheiten - Unterdruckprüfung (ISO 2873:2000)
2873:2000)
This European Standard was approved by CEN on 26 August 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2873:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 2873:2003
EN ISO 2873:2002 (E)
Foreword
The text of the International Standard from Technical Committee ISO/TC 122 "Packaging" of the
International Organization for Standardization (ISO) has been taken over as a European
Standard by Technical Committee CEN/TC 261 "Packaging", the secretariat of which is held by
AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by March 2003, and conflicting national
standards shall be withdrawn at the latest by March 2003.
This document supersedes EN 22873:1992.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 2873:2000 has been approved by CEN as a
European Standard without any modifications.
NOTE Normative references to International Standards are listed in annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 2873:2003
EN ISO 2873:2002 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 2206 1987 Packaging - Complete, filled transport EN 22206 1992
packages - Identification of parts when
testing
3

---------------------- Page: 5 ----------------------

SIST EN ISO 2873:2003

---------------------- Page: 6 ----------------------

SIST EN ISO 2873:2003
INTERNATIONAL ISO
STANDARD 2873
Third edition
2000-03-01
Packaging — Complete, filled transport
packages and unit loads — Low pressure
test
Emballages — Emballages d'expédition complets et pleins et charges
unitaires — Essai à basse pression
Reference number
ISO 2873:2000(E)
©
ISO 2000

---------------------- Page: 7 ----------------------

SIST EN ISO 2873:2003
ISO 2873:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading
this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in
this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 734 10 79
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 2873:2003

---------------------- Page: 9 ----------------------

SIST EN ISO 2873:2003
ISO 2873:2000(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are
...