Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

This standard is concerned with conducted disturbances in the frequency range from 0 kHz to 9 kHz, with an extension up to 148,5 kHz specifically for mains signalling systems. It gives compatibility levels for public low voltage a.c. distribution systems having a nominal voltage up to 420 V, single-phase or 690 V, three-phase and a nominal frequency of 50 Hz or 60 Hz.

Elektromagnetische Verträglichkeit (EMV) - Teil 2-2: Umgebungsbedingungen - Verträglichkeitspegel für niederfrequente leitungsgeführte Störgrößen und Signalübertragung in öffentlichen Niederspannungsnetzen

Compatibilité électromagnétique (CEM) - Partie 2-2: Environnement - Niveaux de compatibilité pour les perturbations conduites à basse fréquence et la transmission des signaux sur les réseaux publics d'alimentation basse tension

Elektromagnetna združljivost (EMC) - Okolje - Nivoji združljivosti za nizkofrekvenčne prevodne motnje in signaliziranje v javnih nizkonapetostnih napajalnih sistemih - Dopolnilo A2

Ta standard obravnava prevodne motnje v frekvenčnem območju od 0 kHz do 9 kHz z razširitvijo do 148,5 kHz zlasti za omrežne sisteme napetostnih signalov. Določa nivoje združljivosti za javne nizkonapetostne razdelilne sisteme z nazivno napetostjo do 420 V pri eni fazi ali 690 V pri treh fazah in nazivno frekvenco 50 Hz ali 60 Hz.

General Information

Status
Published
Publication Date
14-Oct-2019
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
25-Jul-2019
Due Date
29-Sep-2019
Completion Date
15-Oct-2019

Relations

Overview

EN 61000-2-2:2002/A2:2019 (IEC 61000-2-2:2002/A2:2018) is a CENELEC/IEC amendment that defines compatibility levels for low‑frequency conducted disturbances and signalling in public low‑voltage power supply systems. It updates the original Part 2‑2 environment publication to clarify voltage‑fluctuation (flicker) data, add numeric values for curve points, and introduce compatibility levels in the 30 kHz–150 kHz band for differential‑mode voltage distortion. Measurement methods remain outside the scope.

Key topics and technical requirements

  • Compatibility levels: Reference levels for coordination when setting emission limits and immunity requirements for equipment supplied from public low‑voltage networks.
  • 30 kHz–150 kHz band: New Table 4 gives compatibility levels for differential‑mode voltage distortion (values expressed in dB(µV)); the level decreases linearly with log(frequency) across subranges (30–50 kHz and 50–150 kHz).
  • Voltage fluctuations and flicker: Amendment adds numeric values corresponding to Figure 1 (now provided in Annex E / Table E.1) to support precise assessments for various lamp types and supply frequencies.
  • Scope clarification: A new note states that measurement methods for disturbance levels are not covered by this document.
  • Informative basis: Annex D explains rationale and evidence for the 30 kHz–150 kHz compatibility curve, discussing sources of interference (e.g., switching converters, PV inverters) and the impact on affected equipment.
  • Practical considerations: The amendment recognizes that factors beyond amplitude - such as mains impedance, spectral shape and number of spectral lines, and time behaviour - influence EMC in this frequency range.

Practical applications and typical users

This standard is intended as a reference for:

  • EMC engineers and test laboratories setting emission and immunity criteria.
  • Product manufacturers of equipment connected to low‑voltage public mains (e.g., meters, clocks, multicarrier signalling systems, lighting, filter capacitors).
  • Grid and system designers assessing impact of distributed generation and switching power supplies on power quality.
  • Regulators and standards bodies when defining national or regional emission limits and coordination practices.

Using EN 61000-2-2:2019 helps stakeholders reduce harmful interference, improve long‑term EMC performance, and guide cost‑effective emission‑limit design decisions.

Related standards

  • IEC 61000‑2‑2 (base publication)
  • CISPR 15 (referenced for limits on lighting equipment)
  • IEC 61000‑4‑15 (calibration and flicker testing - numerical data cross‑referenced in Annex E)

Keywords: EMC, EN 61000-2-2, IEC 61000-2-2, low-frequency conducted disturbances, low-voltage power supply, compatibility levels, flicker, voltage fluctuations, 30 kHz–150 kHz, switching power supplies, photovoltaic inverters.

Amendment
SIST EN 61000-2-2:2003/A2:2019
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2019
Elektromagnetna združljivost (EMC) - Okolje - Nivoji združljivosti za
nizkofrekvenčne prevodne motnje in signaliziranje v javnih nizkonapetostnih
napajalnih sistemih - Dopolnilo A2
Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-
frequency conducted disturbances and signalling in public low-voltage power supply
systems
Elektromagnetische Verträglichkeit (EMV) - Teil 2-2: Umgebungsbedingungen -
Verträglichkeitspegel für niederfrequente leitungsgeführte Störgrößen und
Signalübertragung in öffentlichen Niederspannungsnetzen
Compatibilité électromagnétique (CEM) - Partie 2-2: Environnement - Niveaux de
compatibilité pour les perturbations conduites à basse fréquence et la transmission des
signaux sur les réseaux publics d'alimentation basse tension
Ta slovenski standard je istoveten z: EN 61000-2-2:2002/A2:2019
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61000-2-2:2002/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2019
ICS 33.100.01
English Version
Electromagnetic compatibility (EMC) - Environment -
Compatibility levels for low-frequency conducted disturbances
and signalling in public low-voltage power supply systems
(IEC 61000-2-2:2002/A2:2018)
Compatibilité électromagnétique (CEM) - Partie 2-2: Elektromagnetische Verträglichkeit (EMV) - Teil 2-2:
Environnement - Niveaux de compatibilité pour les Umgebungsbedingungen - Verträglichkeitspegel für
perturbations conduites à basse fréquence et la niederfrequente leitungsgeführte Störgrößen und
transmission des signaux sur les réseaux publics Signalübertragung in öffentlichen Niederspannungsnetzen
d'alimentation basse tension (IEC 61000-2-2:2002/A2:2018)
(IEC 61000-2-2:2002/A2:2018)
This amendment A2 modifies the European Standard EN 61000-2-2:2002; it was approved by CENELEC on 2018-06-13. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61000-2-2:2002/A2:2019 E

European foreword
The text of document 77A/980/CDV, future IEC 61000-2-2/A2, prepared by SC 77A "EMC - Low
frequency phenomena" of IEC/TC 77 "Electromagnetic compatibility" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 61000-2-2:2002/A2:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-11-17
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-05-17
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61000-2-2:2002/A2:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
CISPR 15 NOTE Harmonized as EN 55015

IEC 61000-2-2 ®
Edition 2.0 2018-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
BA SIC EMC PUBLICATION
P UBLICATION FONDAMENTALE EN CEM

AMENDMENT 2
AMENDEMENT 2
Electromagnetic compatibility (EMC) –

Part 2-2: Environment – Compatibility levels for lowfrequency conducted

disturbances and signalling in public low-voltage power supply systems

Compatibilité électromagnétique (CEM) –

Partie 2-2: Environnement – Niveaux de compatibilité pour les perturbations

conduites à basse fréquence et la transmission des signaux sur les réseaux

publics d’alimentation basse tension

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.100.01 ISBN 978-2-8322-5656-5

– 2 – IEC 61000-2-2:2002/AMD2:2018
© IEC 2018
FOREWORD
This amendment has been prepared by subcommittee 77A: EMC – Low frequency
phenomena, of IEC technical committee 77: Electromagnetic compatibility.
The text of this amendment is based on the following documents:
CDV Report on voting
77A/980/CDV 77A/992/RVC
Full information on the voting for the approval of this amendment can b
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

Frequently Asked Questions

SIST EN 61000-2-2:2003/A2:2019 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems". This standard covers: This standard is concerned with conducted disturbances in the frequency range from 0 kHz to 9 kHz, with an extension up to 148,5 kHz specifically for mains signalling systems. It gives compatibility levels for public low voltage a.c. distribution systems having a nominal voltage up to 420 V, single-phase or 690 V, three-phase and a nominal frequency of 50 Hz or 60 Hz.

This standard is concerned with conducted disturbances in the frequency range from 0 kHz to 9 kHz, with an extension up to 148,5 kHz specifically for mains signalling systems. It gives compatibility levels for public low voltage a.c. distribution systems having a nominal voltage up to 420 V, single-phase or 690 V, three-phase and a nominal frequency of 50 Hz or 60 Hz.

SIST EN 61000-2-2:2003/A2:2019 is classified under the following ICS (International Classification for Standards) categories: 33.100.01 - Electromagnetic compatibility in general. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 61000-2-2:2003/A2:2019 has the following relationships with other standards: It is inter standard links to SIST EN 61000-2-2:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

SIST EN 61000-2-2:2003/A2:2019 is associated with the following European legislation: EU Directives/Regulations: 2014/30/EU; Standardization Mandates: M/452, M/490. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

You can purchase SIST EN 61000-2-2:2003/A2:2019 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.