iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61000-2-2:2002/A2:2019

(Amendment)

Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

2019-03-19: TC Secretary has requested to proceed with publication. No Annex ZZ needed.
Link to  M/452 (safety of music players) removed, standard supporting to EMC, but not as hEN.

Elektromagnetische Verträglichkeit (EMV) - Teil 2-2: Umgebungsbedingungen - Verträglichkeitspegel für niederfrequente leitungsgeführte Störgrößen und Signalübertragung in öffentlichen Niederspannungsnetzen

Compatibilité électromagnétique (CEM) - Partie 2-2: Environnement - Niveaux de compatibilité pour les perturbations conduites à basse fréquence et la transmission des signaux sur les réseaux publics d’alimentation basse tension

Elektromagnetna združljivost (EMC) - Okolje - Nivoji združljivosti za nizkofrekvenčne prevodne motnje in signaliziranje v javnih nizkonapetostnih napajalnih sistemih - Dopolnilo A2

Ta standard obravnava prevodne motnje v frekvenčnem območju od 0 kHz do 9 kHz z razširitvijo do 148,5 kHz zlasti za omrežne sisteme napetostnih signalov. Določa nivoje združljivosti za javne nizkonapetostne razdelilne sisteme z nazivno napetostjo do 420 V pri eni fazi ali 690 V pri treh fazah in nazivno frekvenco 50 Hz ali 60 Hz.

General Information

Status
Published
Publication Date
16-May-2019
Withdrawal Date
16-May-2022
ICS
33.100.01 - Electromagnetic compatibility in general
Technical Committee
CLC/TC 210 - Electromagnetic Compatibility (EMC)
Drafting Committee
IEC/SC 77A - IEC_SC_77A
Current Stage
6060 - Document made available - Publishing
Start Date
17-May-2019
Completion Date
17-May-2019
Directive
2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
Mandate
M/452 - Standardisation mandate to CEN, CENELEC and ETSI in the field of Directives 1999/5/EC, 2006/95/EC and 2001/95/EC for health and safety aspects of personal music players and mobile phones with a music playing function
M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
Ref Project
SIST EN 61000-2-2:2003/A2:2019 - Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

Relations

Amends
EN 61000-2-2:2002 - Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
Effective Date
27-Jan-2023

Buy Standard

EN 61000-2-2:2003/A2:2019EN 61000-2-2:2003/A2:2019
PreviousNext
Amendment
EN 61000-2-2:2003/A2:2019
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2019
Elektromagnetna združljivost (EMC) - Okolje - Nivoji združljivosti za
nizkofrekvenčne prevodne motnje in signaliziranje v javnih nizkonapetostnih
napajalnih sistemih - Dopolnilo A2
Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-
frequency conducted disturbances and signalling in public low-voltage power supply
systems
Elektromagnetische Verträglichkeit (EMV) - Teil 2-2: Umgebungsbedingungen -
Verträglichkeitspegel für niederfrequente leitungsgeführte Störgrößen und
Signalübertragung in öffentlichen Niederspannungsnetzen
Compatibilité électromagnétique (CEM) - Partie 2-2: Environnement - Niveaux de
compatibilité pour les perturbations conduites à basse fréquence et la transmission des
signaux sur les réseaux publics d'alimentation basse tension
Ta slovenski standard je istoveten z: EN 61000-2-2:2002/A2:2019
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61000-2-2:2002/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2019
ICS 33.100.01
English Version
Electromagnetic compatibility (EMC) - Environment -
Compatibility levels for low-frequency conducted disturbances
and signalling in public low-voltage power supply systems
(IEC 61000-2-2:2002/A2:2018)
Compatibilité électromagnétique (CEM) - Partie 2-2: Elektromagnetische Verträglichkeit (EMV) - Teil 2-2:
Environnement - Niveaux de compatibilité pour les Umgebungsbedingungen - Verträglichkeitspegel für
perturbations conduites à basse fréquence et la niederfrequente leitungsgeführte Störgrößen und
transmission des signaux sur les réseaux publics Signalübertragung in öffentlichen Niederspannungsnetzen
d'alimentation basse tension (IEC 61000-2-2:2002/A2:2018)
(IEC 61000-2-2:2002/A2:2018)
This amendment A2 modifies the European Standard EN 61000-2-2:2002; it was approved by CENELEC on 2018-06-13. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61000-2-2:2002/A2:2019 E

European foreword
The text of document 77A/980/CDV, future IEC 61000-2-2/A2, prepared by SC 77A "EMC - Low
frequency phenomena" of IEC/TC 77 "Electromagnetic compatibility" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 61000-2-2:2002/A2:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-11-17
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-05-17
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61000-2-2:2002/A2:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
CISPR 15 NOTE Harmonized as EN 55015

IEC 61000-2-2 ®
Edition 2.0 2018-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
BA SIC EMC PUBLICATION
P UBLICATION FONDAMENTALE EN CEM

AMENDMENT 2
AMENDEMENT 2
Electromagnetic compatibility (EMC) –

Part 2-2: Environment – Compatibility levels for lowfrequency conducted

disturbances and signalling in public low-voltage power supply systems

Compatibilité électromagnétique (CEM) –

Partie 2-2: Environnement – Niveaux de compatibilité pour les perturbations

conduites à basse fréquence et la transmission des signaux sur les réseaux

publics d’alimentation basse tension

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.100.01 ISBN 978-2-8322-5656-5

– 2 – IEC 61000-2-2:2002/AMD2:2018
© IEC 2018
FOREWORD
This amendment has been prepared by subcommittee 77A: EMC – Low frequency
phenomena, of IEC technical committee 77: Electromagnetic compatibility.
The text of this amendment is based on the following documents:
CDV Report on voting
77A/980/CDV 77A/992/RVC
Full information on the voting for the approval of this amendment can b
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 61000-2-2:2002/A1:2017(Amendment)
Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
SIST EN 61000-2-2:2003/A1:2018

This standard is concerned with conducted disturbances in the frequency range from 0 kHz to 9 kHz, with an extension up to 148,5 kHz specifically for mains signalling systems. It gives compatibility levels for public low voltage a.c. distribution systems having a nominal voltage up to 420 V, single-phase or 690 V, three-phase and a nominal frequency of 50 Hz or 60 Hz.

  • Amendment
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 55017:2011(Main)
Methods of measurement of the suppression characteristics of passive EMC filtering devices
SIST EN 55017:2011

CISPR 17:2011 specifies methods to measure the radio interference suppression characteristics of passive EMC filtering devices used in power and signal lines, and in other circuits. The defined methods may also be applied to combinations of over-voltage protection devices and EMC filtering devices. The measurement method covers the frequency range from 9 kHz to several GHz depending on the device and test circuit. The standard describes procedures for laboratory tests (type tests) as well as factory tests. The suppression characteristics of EMC filters and components used for the suppression of EM disturbances, are a function of numerous variables such as impedance of the circuits to which they connect, operating voltage and current, and ambient temperature. This standard specifies uniform test methods that will enable comparison of filtering and suppression characteristics determined by test laboratories or specified by manufacturers. Measurement procedures are provided for unbiased and bias conditions. Measurements under bias conditions are performed to determine potential non-linear behaviour of the EMC filtering devices such as saturation effects in inductors with magnetic cores. This testing serves to show the usability in a specific application (such as frequency converters that produce high amplitudes of common mode pulse current and thus may drive inductors into saturation). Measurement under bias conditions may be omitted if the non-linear behaviour can be determined by other methods (e.g. separate saturation measurement of the inductors used). The first edition of CISPR 17 (1981) prescribed the measurement methods of insertion loss mainly for power-line filters. Today, however, many types of sophisticated EMC filters and suppression components can be found in various electronic devices. Those filters need to be characterized using standardized measurement methods. New methods for measurement of impedance and S-parameters for such EMI devices are included in this second edition.

  • Standard
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TR 50538:2010(Main)
Guide to EMC Directive conformity of equipment designed for military purposes
SIST-TP CLC/TR 50538:2011

This Technical Report is applicable to any non-exempt military equipment. This Technical Report does not affect the requirements to meet military standards. This Technical Report only covers aspects related to EMC as covered by the EMC Directive 2004/108/EC and other directives that address EMC. In this respect there is no distinction between civilian and defence equipment. For the purpose of this Technical Report the term “military” is equivalent to the term “defence”. Annex B describes Article 346 and Annex C provides the associated EC Council List of items under Article 346 [12]. The definitions in EMC Directive 2004/108/EC of “apparatus” and “fixed installations” as applied to military equipment are considered and guidance is given on applicability with the use of flow diagrams. For apparatus, the use of military standards to demonstrate compliance with the EMC Directive by using various assessment methods that do not use harmonised standards and a “gap” analysis tool for comparison of military standard results with harmonised standards is presented. This Technical Report also covers fixed installations using military equipment, and their impact on neighbouring environments. The conformity assessment procedures of EMC Directive 2004/108/EC have been reviewed and guidance given on the applicability and contents of detailed technical EMC assessment. Annex J includes some case studies to help clarify the extent and use of this Technical Report.

  • Technical report
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50498:2010(Main)
Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles
SIST EN 50498:2011

This European Standard specifies limits and methods of measurement for disturbance emissions and immunity characteristics of aftermarket equipment (ESAs) which are referenced by Automotive EMC Directive 2004/104/EC, Annex I, 3.2.9, and which are not related to immunity-related functions of vehicles as defined in Automotive EMC Directive 2004/104/EC, Annex I, 2.1.12. Any equipment (or part of an ESA) which has a primary function of radio transmission and/or reception according to the ITU Radio Regulations are excluded from the scope of this publication. This European Standard covers the frequency range 9 kHz to 400 GHz. To date, it specifies limits and methods of measurement for conducted and radiated disturbances from ESAs in the frequency range 30 MHz to 1 GHz and immunity requirements for conducted transients. The assessment of an ESA needs to be performed only in the frequency ranges where limits are defined. The emission requirements have been selected so as to ensure that disturbances generated by ESAs operating normally do not exceed a level that could prevent the vehicle or apparatus external to the vehicle from operating as intended. Fault conditions are not taken into account. Not all disturbance phenomena have been included for testing purposes in this standard but only those considered as relevant for the equipment covered by this standard. As ESAs covered by this standard are not related to immunity-related function, only the following electromagnetic disturbance phenomena are evaluated: • broadband and narrowband radiated electromagnetic disturbances; • conducted transient disturbances; • conducted transient immunity. Accessories that are not connected directly to the vehicle harness, but only via a special interface are normally excluded from vehicular EMC requirements.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61000-2-12:2003(Main)
Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems
SIST EN 61000-2-12:2003

This part of EN 61000 is concerned with conducted disturbances in the frequency range from 0 kHz to 9 kHz, with an extension up to 148,5 kHz specifically for mains signalling systems. Compatibility levels are specified for electromagnetic disturbances of the types which can be expected in public medium voltage power supply systems, for guidance in: a) the limits to be set for disturbance emission into public power supply systems (including the planning levels defined in 3.1.5); b) the immunity limits to be set by product committees and others for the equipment exposed to the conducted disturbances present in public power supply systems. The disturbance phenomena considered are: voltage fluctuations and flicker, harmonics up to and including order 50, inter-harmonics up to the 50th harmonic, voltage distortions at higher frequencies (above 50th harmonic), voltage dips and short supply interruptions, voltage unbalance, transient overvoltages, power frequency variation, d.c. components, mains signalling. The medium-voltage systems covered by this standard are public distribution systems supplying either: a) private installations in which equipment is connected directly or through transformers, or b) substations feeding public low-voltage distribution systems.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61000-2-2:2002(Main)
Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
SIST EN 61000-2-2:2003

Gives compatibility levels to be considered in public low-voltage supply systems with regard to the above-mentioned phenomena. Compatibility levels are intended to serve as reference values for trouble-free operation for equipment installed in public power supply systems.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61000-5-7:2001(Main)
Electromagnetic compatibility (EMC) - Part 5-7: Installation and mitigation guidelines - Degrees of protection by enclosures against electromagnetic disturbances (EM code)
SIST EN 61000-5-7:2002

Describes performance requirements, test methods and classification procedures for degrees of protection provided by empty enclosures against electromagnetic disturbances for frequencies between 10 kHz and 40 GHz. The shielding protection is measured for the purpose of demonstrating that the enclosure provides adequate shielding of electromagnetic energy to support acceptable performance of the complete assembled units when tested to applicable IEC standards. The purpose of this standard is to provide a repeatable means for evaluating the electromagnetic shielding performance of empty mechanical enclosures, including cabinets and subracks, and to specify a marking code to allow a manufacturer to select an enclosure with a known capability for attenuating electromagnetic fields. The requirements for immunity to various types of electromagnetic disturbances, including lightning and high-altitude electro-magnetic pulse (HEMP) will need to be considered by manufacturers when determining the need for application of this standard for specific equipment and applications, and for the specific enclosure shielding requirements which are necessary as a function of frequency.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
FprEN 50561-2(Main)
Power line communication apparatus used in low voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 2: Apparatus for access-network use
kSIST FprEN 50561-2

This part of EN 50561 specifies limits and methods of measurement of radio disturbance characteristics for PLC access network communication apparatus that use the low voltage power installation as the transmission medium. This European Standard applies to equipment that communicate over this medium in the frequency range 1,606 5 MHz to 30 MHz. Procedures are given for the measurement of signals generated by the equipment and limits are specified for the frequency range 9 kHz to 400 GHz. No measurement is required at frequencies where no limit is specified. PLC apparatus in the scope of this standard is intended to operate under the responsibility of the PLC access network operator. This part does not apply to PLC apparatus solely communicating to each other in the same home; such apparatus is in the scope of EN 50561-1.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50065-2-3:2024(Main)
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communicating equipment operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors
SIST EN 50065-2-3:2024

This document applies to electrical equipment using signals in the frequency range 3 kHz to 95 kHz to transmit or receive information on low voltage electrical systems, for electricity suppliers and distributors. Mains communicating equipment (MCE) may fall into one of the two following categories: - MCE implementing transmission or reception of information on LV distribution networks or installations of network users connected to the public electricity distribution network as the sole function. Immunity requirements for such equipment are entirely covered by this document; - MCE being equipment covered by the scope of other standards, integrating mains communication as one of their functions. In this case, only the immunity requirements for the mains communication function of such equipment are covered by the scope of this document. Immunity requirements for all other available functions of this equipment are covered by the relevant product standard or generic standard. The object of this document is to contribute to ensuring EMC in general. It specifies essential immunity requirements and test methods, including those tests which are to be performed during type-testing of MCE, for electromagnetic interference (EMI) generated on LV installations. It defines the methods and requirements for testing immunity of MCE on meeting the essential requirements of the EMCD. Test requirements are specified for each port considered. Furthermore, it provides guidelines for the assessment of the performance of the communication function of an MCE. Normative specifications are under consideration. This document gives immunity requirements which are applicable to MCE used by electricity suppliers and distributors (e.g. DSOs) for purposes like energy management and network monitoring and automation. The levels do not however cover extreme cases which could occur in any location but with a low probability of occurrence. In special cases situations will arise where the level of disturbances could exceed the levels specified in this document, e.g. where a hand-held transmitter is used in proximity of an apparatus. In these instances special mitigation measures might have to be employed. It does not specify immunity of MCE to signals from other MCE operating in the same nominal frequency band or immunity to signals originating from power line carrier systems operating on high or medium-voltage networks. Safety considerations are not included in this document.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60335-2-7:2023/A11:2023(Amendment)
Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines
SIST EN IEC 60335-2-7:2024/A11:2024

This European Standard deals with the safety of electric washing machines for household and similar use, that are intended for washing clothes and textiles, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day