oSIST prEN IEC 61203:2023
(Main)Synthetic esters - Guidelines for maintenance and use in electrical equipment
Synthetic esters - Guidelines for maintenance and use in electrical equipment
Synthetische organische Ester für elektrotechnische Zwecke - Leitlinie zur Wartung von Transformator-Estern in Betriebsmitteln
Esters organiques de synthèse à usages électriques - Guide de maintenance des esters pour transformateurs dans les matériels
Sintetični estri - Smernice za vzdrževanje in uporabo v električni opremi
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2023
Sintetični estri - Smernice za vzdrževanje in uporabo v električni opremi
Synthetic esters - Guidelines for maintenance and use in electrical equipment
Synthetische organische Ester für elektrotechnische Zwecke - Leitlinie zur Wartung von
Transformator-Estern in Betriebsmitteln
Esters organiques de synthèse à usages
électriques - Guide de maintenance des esters pour transformateurs dans
les matériels
Ta slovenski standard je istoveten z: prEN IEC 61203:2023
ICS:
29.035.20 Plastični in gumeni izolacijski Plastics and rubber insulating
materiali materials
29.180 Transformatorji. Dušilke Transformers. Reactors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
10/1203/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61203 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-09-08 2023-12-01
SUPERSEDES DOCUMENTS:
10/1177/CD, 10/1198/CC
IEC TC 10 : FLUIDS FOR ELECTROTECHNICAL APPLICATIONS
SECRETARIAT: SECRETARY:
Italy Mr Massimo Pompili
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 14, SC 17A, TC 20, SC 36A, TC 38, TC 99, TC 112
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for Vote
(CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clauses to be
included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC clauses.
(See AC/22/2007 or NEW GUIDANCE DOC).
TITLE:
Synthetic esters – Guidelines for maintenance and use in electrical equipment
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
– 2 – IEC CDV 61203 © IEC 2023
CONTENTS
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 8
4 Categories of equipment . 8
5 In-service synthetic ester diagnostic tests. 9
6 Evaluation of synthetic esters in new equipment . 10
7 Evaluation of synthetic ester in equipment in service . 11
7.1 General . 11
Application of synthetic esters in transformers is recommended for both sealed and free breathing
equipment. . 11
7.2 Frequency of examination . 11
7.3 Testing procedures . 12
7.3.1 Field tests . 12
7.3.2 Laboratory tests . 12
8 General requirements for corrective actions . 17
9 Interpretation of results . 17
9.2 Colour and appearance . 17
9.3 Breakdown voltage . 17
9.5 Acidity . 18
9.6 Dielectric Dissipation Factor (DDF) and Resistivity . 18
9.7 Fire points . 19
9.8 Interfacial tension (IFT) . 19
9.9 Density . 19
9.10 Pour point. 19
9.11 Additives . 20
9.12 Particle (identification, counting and sizing) . 20
9.13 Compatibility and Miscibility of Synthetic Esters,. 20
9.14 Oxidation stability . 21
9.15 Refractive Index . 21
Refractive index shall be determined by DIN 51423-1 or ISO 5661 (ref method). 21
10 Sampling of synthetic esters from equipment . 22
Annex A - Water and Synthetic Esters (informative) . 23
A.1 General . 23
A.2.1 General . 23
A.2.2 Water in synthetic esters . 23
Annex B - Replacement and treatments of Synthetic Esters in Transformers (informative) . 26
B.1 Transformer retrofilling with synthetic esters . 26
B.2 Reconditioning and reclaiming . 27
General . 27
B.2.1 Reconditioning . 27
B.2.2 Reclaiming . 27
(informative). 30
IEC CDV 61203 © IEC 2023 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SYNTHETIC ESTERS –
GUIDELINES FOR MAINTENANCE AND USE IN ELECTRICAL EQUIPMENT
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national
electrotechnical committees (IEC National Committees). The object of IEC is to promote international cooperation on all
questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC
publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and
Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National
Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the
International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of
opinion on the relevant subjects since each technical committee has representation from all interested IEC National
Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that
sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be
held responsible for the way in which they are used or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the
maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the
corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment
services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by
independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its
technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature
whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or
reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is indispensable for
the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC
shall not be held responsible for identifying any or all these patent rights.
International Standard IEC 61203 has been prepared by IEC technical committee 10: Liquids for
electrotechnical applications. The text of this standard is based on the following documents:
FDIS Report on voting
XX/XX/FDIS XX/XX/RVD
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until the stability
date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific
publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
– 4 – IEC CDV 61203 © IEC 2023
Full information on the voting for the approval of this standard can be found in the report on voting
indicated in the above table.
The National Committees are requested to note that for this publication the stability date is 20XX.
THIS TEXT IS INCLUDED FOR THE INFORMATION OF THE NATIONAL COMMITTEES AND WILL BE DELETED AT
THE PUBLICATION STAGE.
IEC CDV 61203 © IEC 2023 – 5 – 10/1203/CDV
1 INTRODUCTION
2 Synthetic esters are increasingly being used in transformers and electrical equipment employed in
3 electrical power generation, transmission, distribution and industrial applications.
4 Synthetic esters are used in transformers over a wide range of voltage classes. These may be sealed or
5 free breathing. Synthetic esters should only be used in transformers where the internal insulation system
6 has been designed to run with these liquids, given the different electrical performance of synthetic ester
7 as compared to mineral oil. Retrofilling mixtures are not covered in the Normative part of this standard.
8 See Annexe B for more information. When in doubt, contact the transformer or liquid manufacturer for
9 more information.
10 Monitoring and maintaining liquid quality is essential to ensure the reliable operation of synthetic ester
11 filled electrical equipment. Codes of practice for this purpose have been established by electrical power
12 authorities, power companies and industries in many countrie
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.