SIST EN 60966-2-5:2009

Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 1 000 MHz, IEC 61169-2 connectors (IEC 60966-2-5:2009)

This detail specification applies to flexible coaxial cables described in IEC 60096-2. It relates to cable assemblies for radio and TV receivers, and in particular to the cable assemblies subfamily 9,52. (IEC 61169-2). This detail specification gives subfamily requirements and severities which shall be applied. Under qualification approval, the qualification will be conducted in accordance with 12.2 of IEC 60966-2-1 taking into account the specified variants. Only the tests whose results might depend on the variants will be repeated. Under capability approval, the qualification will be conducted on the relating CQCs as defined in 12.3 of IEC 60966-2-1 and described in the CM. Unless otherwise specified in the CM, only lot-by-lot tests from groups Ba and Eb will be conducted on delivered products, all other tests will be performed on CQCs as defined in 12.3 of IEC 60966-2-1 and described in the CM.

Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 2-5: Bauartspezifikation für konfektionierte Kabel für Ton- und Fernsehrundfunkempfänger - Frequenzbereich 0 bis 1 000 MHz, IEC 61169-2 Steckverbinder (IEC 60966-2-5:2009)

Ensemble de cordons coaxiaux et de cordons pour fréquences radioélectriques - Partie 2-5: Spécification particulière pour cordons de connexion de récepteurs TV ou radio - Bande de fréquences de 0 MHz à 1 000 MHz, connecteurs CEI 61169-2 (CEI 60966-2-5:2009)

La CEI 60966-2-5:2009 est une spécification particulière qui s'applique aux cordons coaxiaux souples décrits dans la CEI 60096-2.
Elle concerne les cordons de connexion de récepteurs radio ou TV, en particulier la sous-famille d'ensembles de cordons 9,52 (CEI 61169-2). Cette spécification particulière indique les exigences relatives aux sous-familles et les sévérités qui doivent être appliquées. Cette troisième édition annule et remplace la deuxième édition et constitue une révision technique. Par rapport à la deuxième édition, les principales modifications concernent la mise à jour des références ainsi que l'exigence relative à l'affaiblissement d'écran.
Cette publication doit être lue conjointement avec la
CEI 60966-1:1999.
IEC 60966-2-1:2008 et IEC 60966-2-2:2003.

Sestavi z radiofrekvenčnimi in koaksialnimi kabli - 2-5. del: Podrobna specifikacija za kabelske sestave za radijske in TV sprejemnike - Konektorji za frekvenčno območje od 0 do 1 000 MHz, IEC 61169-2 (IEC 60966-2-5:2009)

General Information

• Status: Withdrawn
• Publication Date: 20-Sep-2009
• Withdrawal Date: 17-Dec-2019
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: MOC - Mobile Communications
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 18-Dec-2019
• Due Date: 10-Jan-2020
• Completion Date: 18-Dec-2019
• Ref Project: EN 60966-2-5:2009 - Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors

Relations

• Replaced By: SIST EN 60966-2-5:2017 - Cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors (IEC 60966-2-5:2016)
• Effective Date: 21-Feb-2017
• Replaced By: SIST EN 60966-2-5:2017 - Cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors (IEC 60966-2-5:2016)
• Effective Date: 07-Jun-2022
• Replaces: SIST EN 60966-2-5:2004 - Radio frequency and coaxial cable assemblies -- Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 1 000 MHz, IEC 61169-2 connectors
• Effective Date: 29-Jan-2023
• Replaces: SIST EN 60966-2-5:2004 - Radio frequency and coaxial cable assemblies -- Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 1 000 MHz, IEC 61169-2 connectors
• Effective Date: 13-May-2010
• Replaces: SIST EN 60966-2-5:2004 - Radio frequency and coaxial cable assemblies -- Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 1 000 MHz, IEC 61169-2 connectors
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60966-2-5:2009
01-oktober-2009
1DGRPHãþD
SIST EN 60966-2-5:2004
6HVWDYL]UDGLRIUHNYHQþQLPLLQNRDNVLDOQLPLNDEOLGHO3RGUREQDVSHFLILNDFLMD
]DNDEHOVNHVHVWDYH]DUDGLMVNHLQ79VSUHMHPQLNH.RQHNWRUML]DIUHNYHQþQR
REPRþMHRGGR0+],(&,(&
Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable
assemblies for radio and TV receivers - Frequency range 0 to 1 000 MHz, IEC 61169-2
connectors (IEC 60966-2-5:2009)
Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 2-5: Bauartspezifikation für
konfektionierte Kabel für Ton- und Fernsehrundfunkempfänger - Frequenzbereich 0 bis 1
000 MHz, IEC 61169-2 Steckverbinder (IEC 60966-2-5:2009)
Ensemble de cordons coaxiaux et de cordons pour fréquences radioélectriques - Partie 2
-5: Spécification particulière pour cordons de connexion de récepteurs TV ou radio -
Bande de fréquences de 0 MHz à 1 000 MHz, connecteurs CEI 61169-2 (CEI 60966-2-
5:2009)
Ta slovenski standard je istoveten z: EN 60966-2-5:2009
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 60966-2-5:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60966-2-5:2009

---------------------- Page: 2 ----------------------

SIST EN 60966-2-5:2009


EUROPEAN STANDARD
EN 60966-2-5

NORME EUROPÉENNE
August 2009
EUROPÄISCHE NORM

ICS 33.120.10 Supersedes EN 60966-2-5:2003


English version


Radio frequency and coaxial cable assemblies -
Part 2-5: Detail specification for cable assemblies
for radio and TV receivers -
Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors
(IEC 60966-2-5:2009)



Ensemble de cordons coaxiaux Konfektionierte Koaxial- und
et de cordons pour fréquences Hochfrequenzkabel -
radioélectriques - Teil 2-5: Bauartspezifikation
Partie 2-5: Spécification particulière für konfektionierte Kabel für Ton- und
pour cordons de connexion Fernsehrundfunkempfänger -
de récepteurs TV ou radio - Frequenzbereich 0 MHz bis 1 000 MHz,
Bande de fréquences Steckverbinder nach IEC 61169-2
de 0 MHz à 1 000 MHz, (IEC 60966-2-5:2009)
connecteurs CEI 61169-2
(CEI 60966-2-5:2009)


This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60966-2-5:2009 E

---------------------- Page: 3 ----------------------

SIST EN 60966-2-5:2009
EN 60966-2-5:2009 - 2 -
Foreword
The text of document 46/304/FDIS, future edition 3 of IEC 60966-2-5, prepared by IEC TC 46, Cables,
wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60966-2-5 on
2009-07-01.
This European Standard supersedes EN 60966-2-5:2003.
Main changes with respect to EN 60966-2-5:2003 are the updating of references as well as the
requirement for screening attenuation.
This detail specification is to be read with EN 60966-1:1999, with EN 60966-2-1:2009 and with
EN 60966-2-2:2003.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60966-2-5:2009 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60966-2-5:2009
- 3 - EN 60966-2-5:2009
Annex ZA
(normative)

Reference documents with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60966-1 1999 Radio frequency and coaxial cable EN 60966-1 1999
assemblies -
Part 1: Generic specification - General
requirements and test methods


IEC 60966-2-1 2008 Radio frequency and coaxial cable EN 60966-2-1 2009
assemblies -
Part 2-1: Sectional specification for flexible
coaxial cable assemblies


IEC 60966-2-2 2003 Radio frequency and coaxial cable EN 60966-2-2 2003
assemblies -
Part 2-2: Blank detail specification for flexible
coaxial cable assemblies


1) 2)
IEC 61169-2 - Radio-frequency connectors - EN 61169-2 2007
Part 2: Sectional specification - Radio
frequency coaxial connectors of type 9,52


1)
IEC 61196-6 - Coaxial communication cables - - -
Part 6: Sectional specification for CATV drop
cables


1)
IEC 62153-4-3 - Metallic communication cable test methods - - -
Part 4-3: Electromagnetic Compatibility
(EMC) - Surface transfer impedance - Triaxial
method




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 5 ----------------------

SIST EN 60966-2-5:2009

---------------------- Page: 6 ----------------------

SIST EN 60966-2-5:2009
IEC 60966-2-5
Edition 3.0 2009-01
INTERNATIONAL
STANDARD


Radio frequency and coaxial cable assemblies –
Part 2-5: Detail specification for cable assemblies for radio and TV receivers –
Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors



INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
G
ICS 33.120.10 ISBN 2-8318-1022-3
® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 60966-2-5:2009
– 2 – 60966-2-5 © IEC:2009(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES –

Part 2-5: Detail specification
for cable assemblies for radio and TV receivers –
Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications hav
...