SIST EN 14863:2006
(Main)Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers
Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers
This European Standard specifies a test method for the determination of the covering of the edge of enamelled steel plate to be used in heat exchangers. This method is applicable to all enamelling processes.
It is applicable to plates with a thickness between 0,5 mm and 1,5 mm.
This method is not applicable where the current flow generated in the test exceeds 3 A.
Emails und Emaillierungen - Bestimmung der Kantenabdeckung von emaillierten Stahlblechen für Wärmeaustauscher
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Kantenabdeckung emaillierter
Stahlbleche, die in Wärmeaustauschern verwendet werden, fest. Sie gilt für alle Emaillierverfahren.
Das Verfahren ist anwendbar auf Bleche mit einer Dicke zwischen 0,5 mm und 1,5 mm.
Es ist nicht anwendbar, wenn bei der Prüfung ein Strom größer 3 A fließt.
Émaux vitrifiés - Détermination du revetement de l'arete sur une plaque en acier émaillé destinée aux échangeurs de chaleur
La présente Norme européenne décrit une méthode d’essai permettant de déterminer le revetement de l’arete d’une plaque en acier émaillé destinée aux échangeurs de chaleur. La présente méthode s’applique a tous les procédés d’émaillage.
Elle s’applique aux plaques d’une épaisseur comprise entre 0,5 mm et 1,5 mm.
Cette méthode n’est pas applicable lorsque l’intensité générée au cours de l’essai dépasse 3 A.
Steklasti in porcelanski emajli – Ugotavljanje roba, ki pokriva emajlirano jekleno pločevino, ki se uporablja pri prenosnikih toplote
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Emails und Emaillierungen - Bestimmung der Kantenabdeckung von emaillierten Stahlblechen für WärmeaustauscherÉmaux vitrifiés - Détermination du revetement de l'arete sur une plaque en acier émaillé destinée aux échangeurs de chaleurVitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers25.220.50Emajlne prevlekeEnamelsICS:Ta slovenski standard je istoveten z:EN 14863:2005SIST EN 14863:2006en01-marec-2006SIST EN 14863:2006SLOVENSKI
STANDARD
SIST EN 14863:2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14863December 2005ICS 25.220.50 English VersionVitreous and porcelain enamels - Determination of the edgecovering on enamelled steel plate to be used in heat exchangersÉmaux vitrifiés - Détermination du revêtement de l'arête surune plaque en acier émaillé destinée aux échangeurs dechaleurEmails und Emaillierungen - Bestimmung derKantenabdeckung von emaillierten Stahlblechen fürWärmeaustauscherThis European Standard was approved by CEN on 4 November 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14863:2005: ESIST EN 14863:2006
EN 14863:2005 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Principle.4 4 Reagents and materials.4 5 Apparatus.4 6 Test specimens.7 7 Procedure.7 8 Calculation and expression of results.7 9 Accuracy.8 10 Test report.8
SIST EN 14863:2006
EN 14863:2005 (E) 3 Foreword This European Standard (EN 14863:2005) has been prepared by Technical Committee CEN/TC 262 “Metallic and other inorganic coatings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national standards shall be withdrawn at the latest by June 2006. WARNING – The use of this European Standard may involve hazardous materials, operations and equipment.
This European Standard does not purport to address all of the safety problems associated with its use.
It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 14863:2006
EN 14863:2005 (E) 4 1 Scope This European Standard specifies a test method for the determination of the covering of the edge of enamelled st
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.