SIST EN 1116:2004
(Main)Kitchen furniture - Co-ordinating sizes for kitchen furniture and kitchen appliances
Kitchen furniture - Co-ordinating sizes for kitchen furniture and kitchen appliances
This European Standard contains co-ordinating sizes for kitchen furniture including worktops as well as for kitchen appliances, sinks and decorative panels. For convenience, in this standard the terms "furniture" and "appliance" are used for "kitchen furniture" and "kitchen appliance".
It defines dimensions for the height, the width, the depth and the space to enable furniture, appliances, sinks and decorative panels to fit together as elements of kitchen equipment.
This European Standard does not apply to catering equipment.
Küchenmöbel - Koordinationsmaße für Küchenmöbel und Küchengeräte
Diese Europäische Norm enthält Koordinationsmaße für Küchenmöbel und Arbeitsplatten (im Folgenden kurz Möbel genannt) sowie für Küchengeräte, Spülen und Dekorplatten (im Folgenden kurz Geräte genannt).
Sie legt Maße für Höhen, Breiten, Tiefen und Abstände so fest, dass Möbel und Geräte als Elemente einer Kücheneinrichtung zueinander passen.
Diese Europäische Norm gilt nicht für gewerbliche Großküchen.
Meubles de cuisine - Dimensions de coordination pour meubles de cuisine et appareils ménagers
Kuhinjsko pohištvo - Koordinacijske mere za kuhinjsko pohištvo in kuhinjske aparate
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kuhinjsko pohištvo - Koordinacijske mere za kuhinjsko pohištvo in kuhinjske aparateKüchenmöbel - Koordinationsmaße für Küchenmöbel und KüchengeräteMeubles de cuisine - Dimensions de coordination pour meubles de cuisine et appareils ménagersKitchen furniture - Co-ordinating sizes for kitchen furniture and kitchen appliances97.040.10Kuhinjsko pohištvoKitchen furnitureICS:Ta slovenski standard je istoveten z:EN 1116:2004SIST EN 1116:2004en,fr,de01-december-2004SIST EN 1116:2004SLOVENSKI
STANDARDSIST EN 1116:19961DGRPHãþD
SIST EN 1116:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1116June 2004ICS 97.040.10Supersedes EN 1116:1995English versionKitchen furniture - Co-ordinating sizes for kitchen furniture andkitchen appliancesMeubles de cuisine - Dimensions de coordination pourmeubles de cuisine et appareils ménagersKüchenmöbel - Koordinationsmaße für Küchenmöbel undKüchengeräteThis European Standard was approved by CEN on 1 April 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1116:2004: ESIST EN 1116:2004
EN 1116:2004 (E) 2 Contents page Foreword.3 1 Scope.4 2 Terms and definitions.4 3 Co-ordinating sizes for kitchen furniture and kitchen appliances.5 3.1 General.5 3.2 Height.5 3.2.1 Working height.5 3.2.2 Floor unit and built-under appliance.5 3.3 Depth.6 3.3.1 Worktop.6 3.3.2 Floor unit and built-under appliance.6 3.3.3 Wall unit.6 3.4 Width.7 4 Co-ordinating sizes for appliances openings.8 4.1 Opening in a unit.8 4.1.1 Height.8 4.1.2 Depth.8 4.1.3 Width.9 4.2 Opening for an appliance or sink in a worktop.9 5 Co-ordinating sizes for decorative panels.10 6 Installation of appliances.10
SIST EN 1116:2004
EN 1116:2004 (E) 3 Foreword
This document (EN 1116:2004) has been prepared by Technical Committee CEN /TC 207, "Furniture", the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2004, and conflicting national standards shall be withdrawn at the latest by December 2004. This document supersedes EN 1116:1995. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 1116:2004
EN 1116:2004 (E) 4
1 Scope This European Standard contains co-ordinating sizes for kitchen furniture including worktops as well as for kitchen appliances, sinks and decorative panels. For convenience, in this standard the terms "furniture" and "appliance" are used for "kitchen furniture" and "kitchen appliance". It defines dimensions for the height, the width, the depth and the space to enable furniture, appliances, sinks and decorative panels to fit together as elements of kitchen equipment. This European Standard does not apply to catering equipment. 2 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 2.1 working height vertical dist
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.